|
Help !!!!!!!
|
|
Senior Member
|
12. June 2007 @ 14:40 |
Link to this message
|
|
Download again From my Drive
|
|
Advertisement
|
 |
|
|
|
Yogibairx
Inactive
|
12. June 2007 @ 14:57 |
Link to this message
|
|
ok, i downloaded file manager but ive 4gotten my password, btw whats a cross over cable
|
Senior Member
|
12. June 2007 @ 15:04 |
Link to this message
|
|
you havent downloaded the right file mate
Follow the link
The contents of the Folder have changed to Easy D box 123
RJ45 Ethernet Network Cable
This is the cable you need about a fiver.........Paul
|
|
Yogibairx
Inactive
|
12. June 2007 @ 15:11 |
Link to this message
|
|
ok my friend, ive downloaded dbox123. i'll buy the cale tomorrow. goodnight
|
|
Yogibairx
Inactive
|
13. June 2007 @ 02:36 |
Link to this message
|
|
Hi Paul,
Hope your well. Do you know if a five-in-one type remote would work with a d-box. I'm concerned about the lack of colour keys on mine.
Is there anyway i can unblock channels that are password protected like sky premier, Sky Classic, Sky Action etc? its telling me to press the red button and enter my PIN.
Thanks
John
|
|
ManofS
Suspended due to non-functional email address
|
13. June 2007 @ 04:11 |
Link to this message
|
Originally posted by Yogibairx:
Is there anyway i can unblock channels that are password protected like sky premier, Sky Classic, Sky Action etc? its telling me to press the red button and enter my PIN.
you can't use the red interactive button - there's 2 version of all the movie channels - i.e. Action, Action HiD - view the hidden version
Looks like i choose the wrong week to quit sniffing glue!
|
|
cressi
Junior Member
|
20. June 2007 @ 07:19 |
Link to this message
|
|
i sorry to trouble you . I am new to the forum having just signed up after buying a dbox. I was just trying to update the Services.xml files as the box I have does not have the uk cable lister when scanning. I know I can use bruteforce but would rather add cable provider Sym6952 to my box. For some reason I am not able to connect my pc to the dbox. I have all the software, leads and the correct Ip address but my pc still will not connect. Any Ideas?
Many Thanks
Danny
|
|
Yogibairx
Inactive
|
20. June 2007 @ 07:45 |
Link to this message
|
|
Hi Cressi,
I'm new to this forum too not having a clue about the xbox I bought off a friend some 18 months ago. I've been watching it for numerous months without hardly any channels until "bigdunc" helped me get sorted, now I seem to have almost every channel. I hope he can help you the same way as he has me.
Good luck
Yogi
|
|
cressi
Junior Member
|
20. June 2007 @ 07:50 |
Link to this message
|
|
Thanks Yogi
|
|
ManofS
Suspended due to non-functional email address
|
20. June 2007 @ 23:58 |
Link to this message
|
Originally posted by cressi:
i sorry to trouble you . I am new to the forum having just signed up after buying a dbox. I was just trying to update the Services.xml files as the box I have does not have the uk cable lister when scanning. I know I can use bruteforce but would rather add cable provider Sym6952 to my box. For some reason I am not able to connect my pc to the dbox. I have all the software, leads and the correct Ip address but my pc still will not connect. Any Ideas?
Many Thanks
Danny
This worked first time for me (Link Taken from Techno Source forum) : http://techno-source.co.uk/Joomla/index....d=33&topic=28.0
Looks like i choose the wrong week to quit sniffing glue!
|
|
ManofS
Suspended due to non-functional email address
|
21. June 2007 @ 00:01 |
Link to this message
|
|
it MUST be either :
1) a Cross over patch lead
or
2) Thru a network Switch/Router
Looks like i choose the wrong week to quit sniffing glue!
|
|
cressi
Junior Member
|
21. June 2007 @ 00:44 |
Link to this message
|
|
Thanks ManofS.
I used the link but when I come to Repair/refresh my connection it fails. I am uing a crossover lead between my ethenet connection and the dbox. Any help would be appreciated
|
|
ManofS
Suspended due to non-functional email address
|
21. June 2007 @ 01:26 |
Link to this message
|
Have u turned your firewall off? Any 3rd party one AND the Windows one.
Also, there's this :
Originally posted by Timoweb:
--------------------------------------------------------------------------------
THE BEGINNERS GUIDE - HOW TO FTP AN IMAGE v1.0 (Sept 2005)
What?s required - HARDWARE:
1. DBox2 in DEBUG MODE with Linux Neutrino already installed
2. RJ45 Network Crossover cable.
3. PC (this was done using windows XP) with a network card.
What?s Required ? SOFTWARE:
FTP program eg. ?Flash FXP? (30-day trial version works fine).
?Image? file (eg. boxcracker, sportster, zorge, etc) (make sure to use the correct 1x or 2x Image) (see notes 2)
?Bouquets? and ?Services? files for your area
Let?s Get Started:
To make this easier, place your tv/box close to your PC
(so that you have easy access to the back of both, to change cables around.)
1. PC Setup: Now would be a good time to create a ?System Restore Point? on your PC,
(as you will have probably have to change the IP settings, to something different from your internet settings).
Unplug your internet connection NOW to avoid any conflicts.
Switch OFF all firewalls and antivirus on your PC
(and make sure windows XP built in firewall is OFF)
2. Power on the TV and DBox, but don?t hook it up to your PC yet.
Using the remote control, press DBOX > SETTINGS > NETWORK
Take a note of the DBox network settings
(this is an example only)
IP-Address 192.168.0.3
Net Mask 255.255.255.0
Broadcast 192.168.0.255
Def Gateway 192.168.0.2
Name Server 192.168.0.2
3. On the PC go to START BUTTON > SETTINGS > CONTROL PANEL and open the NETWORK CONNECTIONS
Right-click the network card (it may say Local Area Connection),
and select PROPERTIES > CONFIGURE > ADVANCED tab
Highlight the ?Connection Type? (in the left window),
and in the right ?Value window there is a drop down menu (it will probably currently say automode)
Change the Value to 10 full mode then OK
Again, right-click the same connection, and go back into the PROPERTIES of the network card
There is a List of items in the first window (you may need to scroll down further)
Left-click on internet protocol, when it is highlighted, click the PROPERTIES button.
Select the ?Use the following IP address?
Enter the settings, as you seen it on your DBox, except the IP address will be one digit less of the last number
(eg. 192.168.0.3 on DBox, so use 192.168.0.2 on your PC)
OK these settings.
4. Connect the RJ45 cable between PC and DBox (linking them together)
Run the Flash FXP program
On one side should be the files on the PC
On the other side make sure you select ?ftp browser? (the tab is a monitor and folder picture)
(It may already be selected)
Click CONNECT (the icon which looks like a lightening bolt)
Select QUICK CONNECT the three boxes require some information
SERVER OR URL = (enter the IP address of the DBox)
USERNAME = root
PASSWORD = dbox2
Then click CONNECT
You should now see the DBox files in the window (if not, check the IP settings).
5. In the PC file window, browse to the folder containing the Image file you are going to use (eg. ?2x-cryo-sportster.img?)
In the DBox window browse to the TMP folder (NOTE: you may already be in this folder).
Transfer the image file across into the TMP folder
When done close down the Flash FXP program.
(Now go over to the DBox)
6. Using the DBox remote control, press (in this order)
DBOX > SERVICE > SOFTWARE UPDATE > EXPERT FUNCTIONS > WRITE ONE PARTITION >
FLASH WITHOUT BOOTLOADER
Select the Image available (the one you just transferred over from PC) and select YES to flash
The DBox will start to erase existing flash, and write the new one (this will only take a few minutes)
The DBox will reset itself when done, and start up the new image
*** CONGRATULATIONS YOU HAVE SUCCESSFULLY FLASHED YOUR DBOX ***
IF YOUR DBOX DOESN?T START BACK UP CORRECTLY ?
Use the ?System Restore? program on your PC
Select ?Restore To An Earlier Time? and choose the correct point
Turn back ON your firewall, and virus checker
Connect back onto the internet, and online to the forum
Search for the answer to your problem, or post for some help !!!
7. Now To Add Some Channels:
Go back to stage 2, and check, as your DBox IP Address may have changed
Take a note of the settings (if different) (if so, change the settings on your PC as shown in stage 3)
8. Go back to the PC, and run the Flash FXP program
Reconnect the PC to DBox (remember the IP Address of the DBox may have changed)
In the PC file window, browse to the folder containing the ?service? and ?bouquets? files
In the DBox window browse to /VAR/TUXBOX/CONFIG/ZAPIT/
Transfer the ?service? and ?bouquet? files across into there
When done close down the Flash FXP program.
9. Pull out the power cable to the DBox, wait a few seconds, and then power back on
(this is the best way to prevent any channel problems)
10. You may want to use the ?System Restore? program now, on your PC,
Select ?Restore To An Earlier Time? and choose the correct point
Turn back ON your firewall, and virus checker
Connect back onto the internet, and online to the forum
Let us know how you got on.
NOTES 1:
Try and find the ?service? and ?bouquets? files for your particular area (most areas are different from each other)
Some Image files (which you may download from the net) may already contain pre-installed ?service? files etc.
but, you may find it difficult to transfer (overwrite) with other newer ?service? files (which you may want to try)
jbhoy1 recommends a clean Image (eg a clean version using Cryo-Sportster-17 2X uk02 (or newer)
?NOT HAD ANY PROBLEMS WITH THIS?.
Big thanks to everybody at www.world-of-digital.com This tut is all their work.
I only tried to make it a bit easier for newbies like myself to understand ? jbhoy1
NOTES 2:
Everyone should pay particular attention to the reference 1x or 2x Image file
Nokia DBox is always a 2 chips box, so the correct Image to flash will only ever be the 2x Image file
A Sagem DBox is different ?
You have to physically open up a Sagem DBox to see how many Intel (or AMD) chips
(which are located on the main board close to the tuner section) it will either be 1 or 2
You must flash the matching Image to this corresponding number of chips
There are pictures of the Sagem motherboards, found on the forum
Just do a search to find them, or ask if you?re really stuck
NEVER flash any old Image, if you?re not sure if 1x or 2x (IF YOU DO, THEN THE DBOX MAY NOT RESTART).
Finale
? And a big thanks to jbhoy1 from the Woolif, for allowing me to upload this revised version of the guide
This guide is based on the dbox2 guide for dummies like myself (Nokia) by jbhoy1 (which is based on other previous guides by members)
Your original guide, as it was presented on the forum, is great.
Now I?ve made it available as an easily readable download file. I hope this version, of the guide, meets your approval
Although originally written for a Nokia DBox, almost exactly the same applies for Sagem DBox (except notes 2)
THIS GUIDE IS FREE AND ONLY AVAILABLE FROM THE FORUM MENTIONED ABOVE.
IF YOU FOUND THIS INFORMATION USEFUL THEN PLEASE CONSIDER A DONATION
TO THE FORUM (we all want the place to be around for a good while)
--------------------------------------------------------------------------------
can you ping the dbox from your pc?
Looks like i choose the wrong week to quit sniffing glue!
|
|
cressi
Junior Member
|
21. June 2007 @ 01:53 |
Link to this message
|
|
Thanks for this.
Thanks again for your reply
I found these instructions last night but have so far been unsuccessful.
Part of the problem may be here
Select the ?Use the following IP address?
Enter the settings, as you seen it on your DBox, except the IP address will be one digit less of the last number
(eg. 192.168.0.3 on DBox, so use 192.168.0.2 on your PC)
My ip address ends .0.1 but if I change it to .0.0 ther is an error message.
How do I ping my dbox from pc
Many Thanks
Dan
|
|
cressi
Junior Member
|
21. June 2007 @ 01:59 |
Link to this message
|
|
Doing a ping check now
|
|
ManofS
Suspended due to non-functional email address
|
21. June 2007 @ 02:01 |
Link to this message
|
|
as long as they are within the ip range - i'd choose 0.100 and 0.101 on the end.
open a command prompt (click Start > Run and cmd in the box) then at the dos prompt type ping ip address i.e. ping 192.168.0.101
Looks like i choose the wrong week to quit sniffing glue!
|
|
cressi
Junior Member
|
21. June 2007 @ 02:11 |
Link to this message
|
|
All pings fail
Destination Host unknown
Just been to local computer shop and they have tested the crossover patch cable and all is correct. Now I'm getting a bit stumped. I have a fair idea what to do but I cannot get dbox and pc linked .it's getting frustrating
|
|
cressi
Junior Member
|
21. June 2007 @ 02:18 |
Link to this message
|
|
my cable is id as
CAT 5E PATCH CORD CABLE TEST TO E1A/T1A 568A 0801
iF THIS HELPS
|
|
cressi
Junior Member
|
21. June 2007 @ 03:21 |
Link to this message
|
|
Sorted
There is an error here
Select the ?Use the following IP address?
Enter the settings, as you seen it on your DBox, except the IP address will be one digit less of the last number
(eg. 192.168.0.3 on DBox, so use 192.168.0.2 on your PC)
The higher value goes on you pc and not the other way round
Happy days
|
|
cressi
Junior Member
|
21. June 2007 @ 03:30 |
Link to this message
|
|
Any ideas how i add a cable provider to the service scan list
eg Cableuk sym6952
|
|
cressi
Junior Member
|
21. June 2007 @ 05:29 |
Link to this message
|
|
How do I remove the German providers from service scan and replace them with uk bruteforce and Cable uk Sym 6887.
|
|
ManofS
Suspended due to non-functional email address
|
21. June 2007 @ 05:38 |
Link to this message
|
|
you need the uk cables.xml
Looks like i choose the wrong week to quit sniffing glue!
|
|
cressi
Junior Member
|
21. June 2007 @ 05:56 |
Link to this message
|
|
Done this already with 123dbox and still only got the German providers and no uk ones ????????/
|
Senior Member
|
21. June 2007 @ 06:06 |
Link to this message
|
|
You will have to reflash that box with a uk modded image
That has defaulted back to german
Pm me your e mail addy
and ile post you one ........Paul
|
|
Advertisement
|
|
|
|
cressi
Junior Member
|
21. June 2007 @ 06:10 |
Link to this message
|
|
cant seem to pm you. Can you pm me and i can responde
Ta
cressi
|
