Originally posted by bilbo65:

---

Well, now that you asked.....How about the bold, the color, use of punctuation, grammer, multisyble words, etc.,etc,etc.....:-)

---

Quote:

---

Maybe I need to start sniffing glue again.........................

---

Originally posted by gwendolin:

---

@ZoSoIV

This is NOT a personal attack at you in any way, I just used your thread as an example...there are many members, including Newbies who are doing the same thing...it's only an opinion that I hold so if you think you are using it correctly then far be it for me to say otherwise.

@Varnull,

No use stocking up on any further popcorn for as far as I am concerned the matter is now a non event, I have made my thoughts quite clear.

---

Quote:

---

From gregbell at znet.com Thu Feb 10 04:57:17 2005 From: gregbell at znet.com (Greg Bell) Date: Sat Mar 17 17:21:42 2007 Subject: [MPlayer-dvb] DViCO Card? Message-ID: Hi Folks, Anyone else using the DViCO DVB-T card (cx88 based)? Driver seems to work, but can't get mplayer to compile since the driver is compiled outside the /usr/src/linux tree... Also, missing some of the basics, like command-lines to view TV live, record TV, etc... 'cp' results in 100MB file in about 10 seconds. Seeing the tiny TV torrents leads me to believe that there's a better way. Thanks for any help, -- Greg Bell +61 4 10 432 772 From nsabbi at tiscali.it Thu Feb 10 11:13:31 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:42 2007 Subject: [MPlayer-dvb] DViCO Card? In-Reply-To: References: Message-ID: <420B33CB.8090409@tiscali.it> Greg Bell wrote: >Hi Folks, > >Anyone else using the DViCO DVB-T card (cx88 based)? Driver seems to >work, but can't get mplayer to compile since the driver is compiled >outside the /usr/src/linux tree... > > in this case you didn't install the drivers: make install should copy include/linux/dvb/*.h in /usr/include/linux/dvb/ (or you can copy the include files yourself) >Also, missing some of the basics, like command-lines to view TV live, >record TV, etc... 'cp' results in 100MB file in about 10 seconds. Seeing >the tiny TV torrents leads me to believe that there's a better way. > >Thanks for any help, > > > mplayer dvb:// From gregbell at znet.com Thu Feb 10 13:11:52 2005 From: gregbell at znet.com (Greg Bell) Date: Sat Mar 17 17:21:42 2007 Subject: [MPlayer-dvb] DViCO Card? In-Reply-To: <420B33CB.8090409@tiscali.it> References: <420B33CB.8090409@tiscali.it> Message-ID: > >Anyone else using the DViCO DVB-T card (cx88 based)? Driver seems to > >work, but can't get mplayer to compile since the driver is compiled > >outside the /usr/src/linux tree... > > in this case you didn't install the drivers: make install > should copy include/linux/dvb/*.h in /usr/include/linux/dvb/ > (or you can copy the include files yourself) Cool, that helped - thanks. Got video! With mplayer. So what is people's favorite low-level way of recording to disk? I used to use xawtv's streamer... I know mplayer can dump to disk. Or can I just cp from the interface? ~gb From nsabbi at tiscali.it Thu Feb 10 13:20:58 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:42 2007 Subject: [MPlayer-dvb] DViCO Card? In-Reply-To: References: <420B33CB.8090409@tiscali.it> Message-ID: <420B51AA.609@tiscali.it> Greg Bell wrote: >>>Anyone else using the DViCO DVB-T card (cx88 based)? Driver seems to >>>work, but can't get mplayer to compile since the driver is compiled >>>outside the /usr/src/linux tree... >>> >>> >>in this case you didn't install the drivers: make install >>should copy include/linux/dvb/*.h in /usr/include/linux/dvb/ >>(or you can copy the include files yourself) >> >> > >Cool, that helped - thanks. Got video! With mplayer. > >So what is people's favorite low-level way of recording to disk? I used >to use xawtv's streamer... I know mplayer can dump to disk. Or can I just >cp from the interface? > >~gb > >_______________________________________________ >MPlayer-dvb mailing list >MPlayer-dvb@mplayerhq.hu >http://mplayerhq.hu/mailman/listinfo/mplayer-dvb > > > tzap -r TV 2>/dev/null & cat < /dev/dvb/adapter0/dvr0 > file.ts is the most error-resistent way to record From gregbell at znet.com Fri Feb 11 10:24:29 2005 From: gregbell at znet.com (Greg Bell) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] DViCO Card? In-Reply-To: <420B51AA.609@tiscali.it> References: <420B33CB.8090409@tiscali.it> <420B51AA.609@tiscali.it> Message-ID: > >So what is people's favorite low-level way of recording to disk? I used > > tzap -r TV 2>/dev/null & > cat < /dev/dvb/adapter0/dvr0 > file.ts is the most error-resistent way > to record That seems to work... mplayer has a way of doing that too: mplayer -dumpfile r1.ts -dumpstream dvb://"ABC HDTV" But neither one plays with mplayer, even though mplayer seems to recognize that its a Transport Stream: $ mplayer r1.ts MPlayer dev-CVS-050210-12:30-3.4.2 (C) 2000-2005 MPlayer Team CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Stepping: 1) Detected cache-line size is 32 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 SSE Playing r1.ts. TS file format detected. DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1, PROBING UP TO 2000000, PROG: 0 VIDEO MPEG2(pid=2307)...NO AUDIO! NO SUBS (yet)! PROGRAM N. 0 Opened TS demuxer, audio: ffffffff(pid -1), video: 10000002(pid 2307)...POS=2818 12 VIDEO: MPEG2 1440x1088 (aspect 3) 25.000 fps 11500.0 kbps (1437.5 kbyte/s) vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 1440 x 1088 (preferred csp: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== Audio: no sound Starting playback... VDec: vo config request - 1440 x 1088 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [xv] 1440x1088 => 1934x1088 Planar YV12 aspect: Warning: no suitable new res found! From nsabbi at tiscali.it Fri Feb 11 10:39:10 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] DViCO Card? In-Reply-To: References: <420B33CB.8090409@tiscali.it> <420B51AA.609@tiscali.it> Message-ID: <420C7D3E.4020403@tiscali.it> Greg Bell wrote: >>>So what is people's favorite low-level way of recording to disk? I used >>> >>> >>tzap -r TV 2>/dev/null & >>cat < /dev/dvb/adapter0/dvr0 > file.ts is the most error-resistent way >>to record >> >> > >That seems to work... mplayer has a way of doing that too: > >mplayer -dumpfile r1.ts -dumpstream dvb://"ABC HDTV" > >But neither one plays with mplayer, even though mplayer seems to recognize >that its a Transport Stream: > > >========================================================================== >Audio: no sound >Starting playback... >VDec: vo config request - 1440 x 1088 (preferred csp: Planar YV12) >VDec: using Planar YV12 as output csp (no 0) >Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. >VO: [xv] 1440x1088 => 1934x1088 Planar YV12 >aspect: Warning: no suitable new res found! > > > video is correctly identified, maybe there's something wrong with that resolution. try to add -vc ffmpeg12 eventually followed by -lavdopts lowres=1 From gregbell at znet.com Fri Feb 11 11:38:10 2005 From: gregbell at znet.com (Greg Bell) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] DViCO Card? In-Reply-To: References: <420B33CB.8090409@tiscali.it> <420B51AA.609@tiscali.it> Message-ID: > > >So what is people's favorite low-level way of recording to disk? I used > > > > cat < /dev/dvb/adapter0/dvr0 > file.ts is the most error-resistent way > > $ mplayer r1.ts > TS file format detected. > aspect: Warning: no suitable new res found! Turns out there was just something wrong with that channel. Thanks for your help, everyone. ~gb From gregbell at znet.com Fri Feb 11 12:47:51 2005 From: gregbell at znet.com (Greg Bell) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] DViCO Card? In-Reply-To: <420C7D3E.4020403@tiscali.it> References: <420B33CB.8090409@tiscali.it> <420B51AA.609@tiscali.it> <420C7D3E.4020403@tiscali.it> Message-ID: > >mplayer -dumpfile r1.ts -dumpstream dvb://"ABC HDTV" > > > >aspect: Warning: no suitable new res found! > > try to add -vc ffmpeg12 eventually followed by -lavdopts lowres=1 Oddly, the above error happens with valid channels, but only occasionaly. And, "-lavdopts lowres=1" makes the .ts playable. Any idea why this would be intermittent? ~gb From nsabbi at tiscali.it Fri Feb 11 13:32:37 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] DViCO Card? In-Reply-To: References: <420B33CB.8090409@tiscali.it> <420B51AA.609@tiscali.it> <420C7D3E.4020403@tiscali.it> Message-ID: <420CA5E5.7030807@tiscali.it> Greg Bell wrote: >>>mplayer -dumpfile r1.ts -dumpstream dvb://"ABC HDTV" >>> >>>aspect: Warning: no suitable new res found! >>> >>> >>try to add -vc ffmpeg12 eventually followed by -lavdopts lowres=1 >> >> > > >Oddly, the above error happens with valid channels, but only occasionaly. >And, "-lavdopts lowres=1" makes the .ts playable. Any idea why this would >be intermittent? > >~gb > > > what transponder and frequency are you using? From comte at interia.pl Sat Feb 12 00:26:03 2005 From: comte at interia.pl (Michal Lorek) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] DVB support Message-ID: <200502112326.03727.comte@interia.pl> hello could anyone tell me how to configure mplayer with DVB support, please? I have got Slackware 10.1 with kernel 2.6.10 and Skystar 2 card. mplayer's configure script prints this info about DVB in my system: Checking for DVB ... no (specify path to DVB/ost/include with --with-dvbincdir=DIR) Checking for DVB HEAD ... no (specify path to DVB/include (HEAD Version) with --with-dvbincdir=DIR) but I do not know where I can find those needed files mike ------------------------------------------------------------------- Halo!: czy mozna rozmawiac jeszcze taniej? Sprawdz: >> http://link.interia.pl/f184c << From nsabbi at tiscali.it Sat Feb 12 01:02:16 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] DVB support In-Reply-To: <200502112326.03727.comte@interia.pl> References: <200502112326.03727.comte@interia.pl> Message-ID: <420D4788.7070900@tiscali.it> Michal Lorek wrote: >hello > >could anyone tell me how to configure mplayer with DVB support, please? >I have got Slackware 10.1 with kernel 2.6.10 and Skystar 2 card. >mplayer's configure script prints this info about DVB in my system: > >Checking for DVB ... no (specify path to DVB/ost/include with >--with-dvbincdir=DIR) >Checking for DVB HEAD ... no (specify path to DVB/include (HEAD Version) with >--with-dvbincdir=DIR) > >but I do not know where I can find those needed files > >mike > > > verify that you have the necessary include files in /usr/include/linux/dvb/*.h (frontend.h etc), if not maybe you didn't install some dev package. The voice you have to search in config.log is DVB HEAD, not DVB; config.log will also tell you what went wrong. Nico From comte at interia.pl Sat Feb 12 10:53:05 2005 From: comte at interia.pl (Michal Lorek) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] dvb.conf? Message-ID: <200502120953.05939.comte@interia.pl> hello! finally my mplayer configure script found support for DVB, but when i try run: mplayer dvb:// i get Playing dvb://. DVB CONFIGURATION IS EMPTY, exit Failed to open dvb:// is there any default configuration file for DVB? mike ------------------------------------------------------------------ Sprawdz swoj milosny i partnerski horoskop... >>> http://link.interia.pl/f1848 <<< From nsabbi at tiscali.it Sat Feb 12 11:21:38 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] dvb.conf? In-Reply-To: <200502120953.05939.comte@interia.pl> References: <200502120953.05939.comte@interia.pl> Message-ID: <420DD8B2.1030504@tiscali.it> Michal Lorek wrote: >hello! > >finally my mplayer configure script found support for DVB, but when i try run: > >mplayer dvb:// > >i get > >Playing dvb://. >DVB CONFIGURATION IS EMPTY, exit >Failed to open dvb:// > >is there any default configuration file for DVB? > >mike > > > why don't you read DOCS/xml/en/video.xml? you have to copy a valid channels.conf in ~/.mplayer then run mplayer dvb:// if you want the osd menu copy main/etc/dvb-menu.conf in ~.mplayer/menu.conf, setup your osd correctly and run mplayer -menu dvb:// From comte at interia.pl Sat Feb 12 12:26:55 2005 From: comte at interia.pl (Michal Lorek) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] dvb.conf? In-Reply-To: <200502120953.05939.comte@interia.pl> References: <200502120953.05939.comte@interia.pl> Message-ID: <200502121126.55383.comte@interia.pl> Thanks for reply! now it works! however the problem was that mplayer's original files contain different dvb devices name than i have got in my system, i.e. dvb_tune.c has got char* dvb_frontenddev[4]={"/dev/dvb0.frontend0","/dev/dvb/adapter1/frontend0","/dev/dvb/adapter2/frontend0","/dev/dvb/ char* dvb_dvrdev[4]={"/dev/dvb0.dvr0","/dev/dvb/adapter1/dvr0","/dev/dvb/adapter2/dvr0","/dev/dvb/adapter3/dvr0"}; char* dvb_demuxdev[4]={"/dev/dvb0.demux0","/dev/dvb/adapter1/demux0","/dev/dvb/adapter2/demux0","/dev/dvb/adapter3/dem and my /dev/ directory contains dvb0.demux0, dvb0.fronted0 and so therefore mplayer did not work because it could not open those device originally written in dvb_tune.c mike ------------------------------------------------------------------ Poznaj swoja przyszlosc... Kliknij >> http://link.interia.pl/f1847 <<< From nsabbi at tiscali.it Sat Feb 12 12:37:59 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] dvb.conf? In-Reply-To: <200502121126.55383.comte@interia.pl> References: <200502120953.05939.comte@interia.pl> <200502121126.55383.comte@interia.pl> Message-ID: <420DEA97.1020507@tiscali.it> Michal Lorek wrote: >Thanks for reply! > >now it works! however the problem was that mplayer's original files contain >different dvb devices name than i have got in my system, i.e. > >dvb_tune.c > > has got > >char* >dvb_frontenddev[4]={"/dev/dvb0.frontend0","/dev/dvb/adapter1/frontend0","/dev/dvb/adapter2/frontend0","/dev/dvb/ >char* >dvb_dvrdev[4]={"/dev/dvb0.dvr0","/dev/dvb/adapter1/dvr0","/dev/dvb/adapter2/dvr0","/dev/dvb/adapter3/dvr0"}; >char* >dvb_demuxdev[4]={"/dev/dvb0.demux0","/dev/dvb/adapter1/demux0","/dev/dvb/adapter2/demux0","/dev/dvb/adapter3/dem > >and my /dev/ directory contains > >dvb0.demux0, dvb0.fronted0 and so > >therefore mplayer did not work because it could not open those device >originally written in dvb_tune.c > >mike > > > maybe you are using udev and haven't setup the demon that should map these new device names (that I never heards of) to the usual names? From comte at interia.pl Sat Feb 12 12:43:09 2005 From: comte at interia.pl (Michal Lorek) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] dvb.conf? In-Reply-To: <420DEA97.1020507@tiscali.it> References: <200502120953.05939.comte@interia.pl> <200502121126.55383.comte@interia.pl> <420DEA97.1020507@tiscali.it> Message-ID: <200502121143.09593.comte@interia.pl> frankly speaking i was going to do this, but it was easier to change mplayer source files :) > > maybe you are using udev and haven't setup the demon that should map > these new device names (that I never heards of) to the usual names? > ------------------------------------------------------------------ Sprawdz swoj milosny i partnerski horoskop... >>> http://link.interia.pl/f1848 <<< From nsabbi at tiscali.it Sat Feb 12 12:57:56 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] dvb.conf? In-Reply-To: <200502121143.09593.comte@interia.pl> References: <200502120953.05939.comte@interia.pl> <200502121126.55383.comte@interia.pl> <420DEA97.1020507@tiscali.it> <200502121143.09593.comte@interia.pl> Message-ID: <420DEF44.2080106@tiscali.it> Michal Lorek wrote: >frankly speaking i was going to do this, but it was easier to change mplayer >source files :) > > > >>maybe you are using udev and haven't setup the demon that should map >>these new device names (that I never heards of) to the usual names? >> >> please, don't top-reply. I won't commit code changes like yours if there's a better setup procedure. From comte at interia.pl Sat Feb 12 13:40:57 2005 From: comte at interia.pl (Michal Lorek) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] dvb.conf? In-Reply-To: <420DEF44.2080106@tiscali.it> References: <200502120953.05939.comte@interia.pl> <200502121143.09593.comte@interia.pl> <420DEF44.2080106@tiscali.it> Message-ID: <200502121240.57117.comte@interia.pl> I did as you said and I chose your approach and I reconfigured udev. I admit that I should not have been changing source code and I promise that I will not do this again! thanks for your help mike > > please, don't top-reply. > I won't commit code changes like yours if there's a better setup procedure. > > _______________________________________________ > MPlayer-dvb mailing list > MPlayer-dvb@mplayerhq.hu > http://mplayerhq.hu/mailman/listinfo/mplayer-dvb ---------------------------------------------------------------------- 5 lat INTERIA.PL >>> http://link.interia.pl/f1854 From gregbell at znet.com Mon Feb 14 14:06:29 2005 From: gregbell at znet.com (Greg Bell) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek Message-ID: Hi Folks, I'm recording a transport stream from my DVB-T card with: mencoder dvb://"ABC TV Sydney" -endpos 00:15:00 -oac copy -ovc copy -o me.ts But, using mplayer to play the resulting me.ts, any seek forward quits out: "Exiting... (End of file)" Similar dump using mplayer itself: mplayer -dumpfile mp.ts -dumpstream dvb://"ABC TV Sydney" And the resulting mp.ts is fine. (but there's no -endpos option so I have to kill mplayer to stop the recording :) Output from mencoder included below. Tried -of mpeg, which worked, but that seems to be for MPEG-1 streams only, and the audio/video sync was off. List archive search didn't yield anything. Help please! Thanks! ~greg bell ==================== mplayer bs_me2.ts MPlayer dev-CVS-050210-12:30-3.4.2 (C) 2000-2005 MPlayer Team CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Stepping: 1) Detected cache-line size is 32 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 SSE Setting up LIRC support... mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing bs_me2.ts. AVI file format detected. VIDEO: [] 720x576 24bpp 25.000 fps 5977.2 kbps (729.6 kbyte/s) VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 15000.0 kbps (1875.0 kbyte/s) Clip info: Software: MEncoder dev-CVS-050210-12:30-3.4.2 ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 48000 Hz, 2 ch, 16 bit (0x9), ratio: 32000->192000 (256.0 kbit) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 720 x 576 (preferred csp: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, little-endian 16-bit signed int AF_pre: 48000Hz 2ch little-endian 16-bit signed int AO: [oss] 48000Hz 2ch little-endian 16-bit signed int (2 bps) Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... Starting playback... VDec: vo config request - 720 x 576 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [xv] 720x576 => 1024x576 Planar YV12 A: 0.8 V: 0.5 A-V: 0.264 ct: 0.052 14/ 14 97% 41% 3.3% 11 0 Exiting... (Quit) From nsabbi at tiscali.it Mon Feb 14 14:40:46 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: References: Message-ID: <4210AA5E.10708@tiscali.it> Greg Bell wrote: >Hi Folks, > >I'm recording a transport stream from my DVB-T card with: > >mencoder dvb://"ABC TV Sydney" -endpos 00:15:00 -oac copy -ovc copy -o me.ts > > the resulting file is avi, not TS, but should seek. >But, using mplayer to play the resulting me.ts, any seek forward quits >out: "Exiting... (End of file)" > > does it quit immediately or too early? >Similar dump using mplayer itself: > >mplayer -dumpfile mp.ts -dumpstream dvb://"ABC TV Sydney" > >And the resulting mp.ts is fine. (but there's no -endpos option so I have >to kill mplayer to stop the recording :) > >Output from mencoder included below. Tried -of mpeg, which worked, but >that seems to be for MPEG-1 streams only, and the audio/video sync was >off. List archive search didn't yield anything. Help please! > > you can use -mc 0 -noskip. To get mpeg2 instead of mpeg1 you can use my patch posted saturday in -dev-eng Nico From gregbell at znet.com Tue Feb 15 11:00:13 2005 From: gregbell at znet.com (Greg Bell) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: <4210AA5E.10708@tiscali.it> References: <4210AA5E.10708@tiscali.it> Message-ID: > >I'm recording a transport stream from my DVB-T card with: > > > >mencoder dvb://"ABC TV Sydney" -endpos 00:15:00 -oac copy -ovc copy -o me.ts > > > the resulting file is avi, not TS, but should seek. it definitely doesn't. > >But, using mplayer to play the resulting me.ts, any seek forward quits > >out: "Exiting... (End of file)" > > does it quit immediately or too early? quits immediately on a single forward seek. (forgot to mention that this is mplayer CVS as of Feb 6) > you can use -mc 0 -noskip. -mc 0 is an mplayer option, and -noskip is an mencoder option... OK, trying both... same result. mplayer exits on any seek forward. ~gb From lordvader at swiftdsl.com.au Wed Feb 16 07:02:05 2005 From: lordvader at swiftdsl.com.au (MichaelM) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: References: <4210AA5E.10708@tiscali.it> Message-ID: <4212E1DD.7060402@swiftdsl.com.au> I just posted something on the user forum, and have EXACTLY the same problem with a transport stream put inside an avi file. Everything works (ac3 et. al.), but any seek forward immediately exits. Greg Bell wrote: >>>I'm recording a transport stream from my DVB-T card with: >>> >>>mencoder dvb://"ABC TV Sydney" -endpos 00:15:00 -oac copy -ovc copy -o me.ts >>> >> >>the resulting file is avi, not TS, but should seek. > > > it definitely doesn't. > > > >>>But, using mplayer to play the resulting me.ts, any seek forward quits >>>out: "Exiting... (End of file)" >> >>does it quit immediately or too early? > > > quits immediately on a single forward seek. > > (forgot to mention that this is mplayer CVS as of Feb 6) > > > >>you can use -mc 0 -noskip. > > > -mc 0 is an mplayer option, and -noskip is an mencoder option... OK, > trying both... same result. mplayer exits on any seek forward. > > > ~gb > > _______________________________________________ > MPlayer-dvb mailing list > MPlayer-dvb@mplayerhq.hu > http://mplayerhq.hu/mailman/listinfo/mplayer-dvb > > From nsabbi at tiscali.it Thu Feb 17 10:19:54 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: <4212E1DD.7060402@swiftdsl.com.au> References: <4210AA5E.10708@tiscali.it> <4212E1DD.7060402@swiftdsl.com.au> Message-ID: <421461BA.9020700@tiscali.it> MichaelM wrote: > I just posted something on the user forum, and have EXACTLY the same > problem with a transport stream put inside an avi file. Everything > works (ac3 et. al.), but any seek forward immediately exits. > can you upload a good chunk of the file to ftp://www.mplayerhq.hu/MPlayer/incoming and post the filename, please? From lordvader at swiftdsl.com.au Thu Feb 17 12:52:58 2005 From: lordvader at swiftdsl.com.au (MichaelM) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: <421461BA.9020700@tiscali.it> References: <4210AA5E.10708@tiscali.it> <4212E1DD.7060402@swiftdsl.com.au> <421461BA.9020700@tiscali.it> Message-ID: <4214859A.4060902@swiftdsl.com.au> I'm currently uploading the file: 7HDSample_mpeg_wrapped_in_avi.avi. It should be finished in under 4 hours (only 10k up). It is a 90 second HD stream (fake HD, 576p @ 50fps, no ac3). You cannot seek forwards, but you can seek backwards. Nico Sabbi wrote: > MichaelM wrote: > >> I just posted something on the user forum, and have EXACTLY the same >> problem with a transport stream put inside an avi file. Everything >> works (ac3 et. al.), but any seek forward immediately exits. >> > > can you upload a good chunk of the file to > ftp://www.mplayerhq.hu/MPlayer/incoming and post the filename, please? > > _______________________________________________ > MPlayer-dvb mailing list > MPlayer-dvb@mplayerhq.hu > http://mplayerhq.hu/mailman/listinfo/mplayer-dvb > > From nsabbi at tiscali.it Thu Feb 17 13:04:17 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: <4214859A.4060902@swiftdsl.com.au> References: <4210AA5E.10708@tiscali.it> <4212E1DD.7060402@swiftdsl.com.au> <421461BA.9020700@tiscali.it> <4214859A.4060902@swiftdsl.com.au> Message-ID: <42148841.7060103@tiscali.it> MichaelM wrote: > I'm currently uploading the file: > > 7HDSample_mpeg_wrapped_in_avi.avi. > > It should be finished in under 4 hours (only 10k up). It is a 90 > second HD stream (fake HD, 576p @ 50fps, no ac3). You cannot seek > forwards, but you can seek backwards. I meant the original, so I can try to reproduce the problem From lordvader at swiftdsl.com.au Thu Feb 17 15:06:01 2005 From: lordvader at swiftdsl.com.au (MichaelM) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: <42148841.7060103@tiscali.it> References: <4210AA5E.10708@tiscali.it> <4212E1DD.7060402@swiftdsl.com.au> <421461BA.9020700@tiscali.it> <4214859A.4060902@swiftdsl.com.au> <42148841.7060103@tiscali.it> Message-ID: <4214A4C9.2040308@swiftdsl.com.au> D'oh! OK, then you may as well remove the partial file 7HDSample_mpeg_wrapped_in_avi.avi. I've started uploading 7SD_Sample_mpeg.mpg . It is an SD stream (50 interlaced fps), and about 90 seconds. Nico Sabbi wrote: > MichaelM wrote: > >> I'm currently uploading the file: >> >> 7HDSample_mpeg_wrapped_in_avi.avi. >> >> It should be finished in under 4 hours (only 10k up). It is a 90 >> second HD stream (fake HD, 576p @ 50fps, no ac3). You cannot seek >> forwards, but you can seek backwards. > > > > I meant the original, so I can try to reproduce the problem > > _______________________________________________ > MPlayer-dvb mailing list > MPlayer-dvb@mplayerhq.hu > http://mplayerhq.hu/mailman/listinfo/mplayer-dvb > > From lordvader at swiftdsl.com.au Thu Feb 17 15:07:58 2005 From: lordvader at swiftdsl.com.au (MichaelM) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: <4214A4C9.2040308@swiftdsl.com.au> References: <4210AA5E.10708@tiscali.it> <4212E1DD.7060402@swiftdsl.com.au> <421461BA.9020700@tiscali.it> <4214859A.4060902@swiftdsl.com.au> <42148841.7060103@tiscali.it> <4214A4C9.2040308@swiftdsl.com.au> Message-ID: <4214A53E.5030604@swiftdsl.com.au> Should be ready in an hour. MichaelM wrote: > D'oh! > > OK, then you may as well remove the partial file > 7HDSample_mpeg_wrapped_in_avi.avi. > > I've started uploading 7SD_Sample_mpeg.mpg . > It is an SD stream (50 interlaced fps), and about 90 seconds. > > Nico Sabbi wrote: > >> MichaelM wrote: >> >>> I'm currently uploading the file: >>> >>> 7HDSample_mpeg_wrapped_in_avi.avi. >>> >>> It should be finished in under 4 hours (only 10k up). It is a 90 >>> second HD stream (fake HD, 576p @ 50fps, no ac3). You cannot seek >>> forwards, but you can seek backwards. >> >> >> >> >> I meant the original, so I can try to reproduce the problem >> >> _______________________________________________ >> MPlayer-dvb mailing list >> MPlayer-dvb@mplayerhq.hu >> http://mplayerhq.hu/mailman/listinfo/mplayer-dvb >> >> > > _______________________________________________ > MPlayer-dvb mailing list > MPlayer-dvb@mplayerhq.hu > http://mplayerhq.hu/mailman/listinfo/mplayer-dvb > > From nsabbi at tiscali.it Fri Feb 18 09:50:38 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek In-Reply-To: <4214A53E.5030604@swiftdsl.com.au> References: <4210AA5E.10708@tiscali.it> <4212E1DD.7060402@swiftdsl.com.au> <421461BA.9020700@tiscali.it> <4214859A.4060902@swiftdsl.com.au> <42148841.7060103@tiscali.it> <4214A4C9.2040308@swiftdsl.com.au> <4214A53E.5030604@swiftdsl.com.au> Message-ID: <4215AC5E.8080007@tiscali.it> MichaelM wrote: > Should be ready in an hour. > > MichaelM wrote: > >> D'oh! >> >> OK, then you may as well remove the partial file >> 7HDSample_mpeg_wrapped_in_avi.avi. >> >> I've started uploading 7SD_Sample_mpeg.mpg . >> It is an SD stream (50 interlaced fps), and about 90 seconds. >> >> Nico Sabbi wrote: >> I tried it: it works as expected when muxed to mpeg (obviously since it only 90 seconds long, you can only seek with the left and right arrow keys in 10 seconds increments), both with the old and the new muxer. When muxed to avi I could seek using -forceidx, and yes, it sucks. Nico From blacksat at supereva.it Fri Feb 18 12:00:22 2005 From: blacksat at supereva.it (blacksat@supereva.it) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] Dump out on seek Message-ID: <20050218110022.32754.qmail@mail.supereva.it> mi e' arrivato questo messaggio.. forse ti sei confuso... ;) colgo l'occasione per mandarti i miei salutoni... -----Messaggio Originale----- Da: Nico Sabbi A: MPlayer with Siemens DVB cards Data invio: Fri, 18 Feb 2005 09:50:38 +0100 Oggetto: Re: Re: [MPlayer-dvb] Dump out on seek MichaelM wrote: > Should be ready in an hour. > > MichaelM wrote: > >> D'oh! >> >> OK, then you may as well remove the partial file >> 7HDSample_mpeg_wrapped_in_avi.avi. >> >> I've started uploading 7SD_Sample_mpeg.mpg . >> It is an SD stream (50 interlaced fps), and about 90 seconds. >> >> Nico Sabbi wrote: >> I tried it: it works as expected when muxed to mpeg (obviously since it only 90 seconds long, you can only seek with the left and right arrow keys in 10 seconds increments), both with the old and the new muxer. When muxed to avi I could seek using -forceidx, and yes, it sucks. Nico _______________________________________________ MPlayer-dvb mailing list MPlayer-dvb@mplayerhq.hu http://mplayerhq.hu/mailman/listinfo/mplayer-dvb -------------------------------------------------------------- Entra subito nel Social Network di superEva. Amicizia, Lavoro, Amore: un unico spazio per gestire al meglio tutti i tuoi contatti personali ed ampliare la tua rete di conoscenze. http://www.supereva.com --------------------------------------------------------------- From comte at interia.pl Sat Feb 26 15:44:57 2005 From: comte at interia.pl (Michal Lorek) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] libdts Message-ID: <200502261444.57353.comte@interia.pl> hi! Could anybody tell me how to configure mplayer with libdts support? when I try compile mplayer with option --enable-libdts i get this error: dtsdec.c:27:17: dts.h: No such file or directory dtsdec.c:60: error: parse error before '*' token dtsdec.c: In function `convert2s16_2': dtsdec.c:63: error: `_f' undeclared (first use in this function) dtsdec.c:63: error: (Each undeclared identifier is reported only once dtsdec.c:63: error: for each function it appears in.) dtsdec.c:67: error: `s16' undeclared (first use in this function) dtsdec.c: At top level: dtsdec.c:73: error: parse error before '*' token dtsdec.c: In function `convert2s16_4': dtsdec.c:76: error: `_f' undeclared (first use in this function) dtsdec.c:80: error: `s16' undeclared (first use in this function) dtsdec.c: At top level: dtsdec.c:88: error: parse error before '*' token dtsdec.c: In function `convert2s16_5': dtsdec.c:91: error: `_f' undeclared (first use in this function) dtsdec.c:95: error: `s16' undeclared (first use in this function) dtsdec.c: At top level: dtsdec.c:104: error: parse error before '*' token dtsdec.c: In function `convert2s16_multi': dtsdec.c:107: error: `_f' undeclared (first use in this function) dtsdec.c:109: error: `flags' undeclared (first use in this function) dtsdec.c:111: error: `DTS_MONO' undeclared (first use in this function) dtsdec.c:114: error: `s16' undeclared (first use in this function) dtsdec.c:118: error: `DTS_CHANNEL' undeclared (first use in this function) dtsdec.c:119: error: `DTS_STEREO' undeclared (first use in this function) dtsdec.c:120: error: `DTS_DOLBY' undeclared (first use in this function) dtsdec.c:123: error: `DTS_3F' undeclared (first use in this function) dtsdec.c:132: error: `DTS_2F2R' undeclared (first use in this function) dtsdec.c:135: error: `DTS_3F2R' undeclared (first use in this function) dtsdec.c:138: error: `DTS_LFE' undeclared (first use in this function) dtsdec.c: In function `channels_multi': dtsdec.c:195: error: `DTS_LFE' undeclared (first use in this function) dtsdec.c:199: error: `DTS_CHANNEL_MASK' undeclared (first use in this function) dtsdec.c:199: error: `DTS_2F2R' undeclared (first use in this function) dtsdec.c: In function `dts_decode_frame': dtsdec.c:220: error: `dts_state_t' undeclared (first use in this function) dtsdec.c:220: error: `state' undeclared (first use in this function) dtsdec.c:253: error: `level_t' undeclared (first use in this function) dtsdec.c:253: error: parse error before "level" dtsdec.c:254: error: `sample_t' undeclared (first use in this function) dtsdec.c:258: error: `level' undeclared (first use in this function) dtsdec.c:259: error: `bias' undeclared (first use in this function) dtsdec.c:261: error: `DTS_ADJUST_LEVEL' undeclared (first use in this function) dtsdec.c:275: error: `DTS_CHANNEL_MASK' undeclared (first use in this function) dtsdec.c:275: error: `DTS_LFE' undeclared (first use in this function) dtsdec.c: In function `dts_decode_init': dtsdec.c:298: warning: assignment makes pointer from integer without a cast dtsdec.c: At top level: dtsdec.c:315: error: `dts_state_t' undeclared here (not in a function) dtsdec.c:315: error: parse error before ')' token make[1]: *** [dtsdec.o] Error 1 make[1]: Leaving directory `/tmp/MPlayer-20050226/libavcodec' make: *** [libavcodec/libavcodec.a] Error 2 do I need any additional library to compile mplayer with this option? mike ---------------------------------------------------------------------- Smiechu warte... >>> http://link.interia.pl/f185a From errror at errror.org Sun Feb 27 18:30:03 2005 From: errror at errror.org (Patrick Cernko) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] libdts In-Reply-To: <200502261444.57353.comte@interia.pl> References: <200502261444.57353.comte@interia.pl> Message-ID: <4222039B.5040209@errror.org> Michal Lorek wrote: > hi! > > Could anybody tell me how to configure mplayer with libdts support? when I try > compile mplayer with option --enable-libdts i get this error: > > dtsdec.c:27:17: dts.h: No such file or directory > > do I need any additional library to compile mplayer with this option? > > mike As you allready stated in your subject, you need libdts! IT provides the dts.h header file the compiler is missing here. If you really installed the lib, check, where the header file is located and provide its path to the mplayer configure with --with-extraincdir . Otherwise google for libdts. Sorry, I don't have an URL by hand! CU -- Patrick Cernko | mailto:errror@errror.de | http://www.errror.de Quote of the Week: "In order to make this work without crashing, you must set another option which is not listed in this document." (uw-imap documentation) From johan at vetteblei.nl Sun Feb 27 20:00:47 2005 From: johan at vetteblei.nl (Johan Schuring) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] libdts In-Reply-To: <200502261444.57353.comte@interia.pl> Message-ID: <20050227.d1i.60438500@server.vetteblei.nl> Hi, You should install the development package of it, when you have an .deb, .tgz or .rpm based disribution. I don't know how it's with Gentoo and others.. Johan Michal Lorek (comte@interia.pl) wrote: > > hi! > > Could anybody tell me how to configure mplayer with libdts support? when I try > compile mplayer with option --enable-libdts i get this error: > > dtsdec.c:27:17: dts.h: No such file or directory > dtsdec.c:60: error: parse error before '*' token > dtsdec.c: In function `convert2s16_2': > dtsdec.c:63: error: `_f' undeclared (first use in this function) > dtsdec.c:63: error: (Each undeclared identifier is reported only once > dtsdec.c:63: error: for each function it appears in.) > dtsdec.c:67: error: `s16' undeclared (first use in this function) > dtsdec.c: At top level: > dtsdec.c:73: error: parse error before '*' token > dtsdec.c: In function `convert2s16_4': > dtsdec.c:76: error: `_f' undeclared (first use in this function) > dtsdec.c:80: error: `s16' undeclared (first use in this function) > dtsdec.c: At top level: > dtsdec.c:88: error: parse error before '*' token > dtsdec.c: In function `convert2s16_5': > dtsdec.c:91: error: `_f' undeclared (first use in this function) > dtsdec.c:95: error: `s16' undeclared (first use in this function) > dtsdec.c: At top level: > dtsdec.c:104: error: parse error before '*' token > dtsdec.c: In function `convert2s16_multi': > dtsdec.c:107: error: `_f' undeclared (first use in this function) > dtsdec.c:109: error: `flags' undeclared (first use in this function) > dtsdec.c:111: error: `DTS_MONO' undeclared (first use in this function) > dtsdec.c:114: error: `s16' undeclared (first use in this function) > dtsdec.c:118: error: `DTS_CHANNEL' undeclared (first use in this function) > dtsdec.c:119: error: `DTS_STEREO' undeclared (first use in this function) > dtsdec.c:120: error: `DTS_DOLBY' undeclared (first use in this function) > dtsdec.c:123: error: `DTS_3F' undeclared (first use in this function) > dtsdec.c:132: error: `DTS_2F2R' undeclared (first use in this function) > dtsdec.c:135: error: `DTS_3F2R' undeclared (first use in this function) > dtsdec.c:138: error: `DTS_LFE' undeclared (first use in this function) > dtsdec.c: In function `channels_multi': > dtsdec.c:195: error: `DTS_LFE' undeclared (first use in this function) > dtsdec.c:199: error: `DTS_CHANNEL_MASK' undeclared (first use in this > function) > dtsdec.c:199: error: `DTS_2F2R' undeclared (first use in this function) > dtsdec.c: In function `dts_decode_frame': > dtsdec.c:220: error: `dts_state_t' undeclared (first use in this function) > dtsdec.c:220: error: `state' undeclared (first use in this function) > dtsdec.c:253: error: `level_t' undeclared (first use in this function) > dtsdec.c:253: error: parse error before "level" > dtsdec.c:254: error: `sample_t' undeclared (first use in this function) > dtsdec.c:258: error: `level' undeclared (first use in this function) > dtsdec.c:259: error: `bias' undeclared (first use in this function) > dtsdec.c:261: error: `DTS_ADJUST_LEVEL' undeclared (first use in this > function) > dtsdec.c:275: error: `DTS_CHANNEL_MASK' undeclared (first use in this > function) > dtsdec.c:275: error: `DTS_LFE' undeclared (first use in this function) > dtsdec.c: In function `dts_decode_init': > dtsdec.c:298: warning: assignment makes pointer from integer without a cast > dtsdec.c: At top level: > dtsdec.c:315: error: `dts_state_t' undeclared here (not in a function) > dtsdec.c:315: error: parse error before ')' token > make[1]: *** [dtsdec.o] Error 1 > make[1]: Leaving directory `/tmp/MPlayer-20050226/libavcodec' > make: *** [libavcodec/libavcodec.a] Error 2 > > do I need any additional library to compile mplayer with this option? > > mike > > ---------------------------------------------------------------------- > Smiechu warte... >>> http://link.interia.pl/f185a > > _______________________________________________ > MPlayer-dvb mailing list > MPlayer-dvb@mplayerhq.hu > http://mplayerhq.hu/mailman/listinfo/mplayer-dvb > -- They say when you play a Microsoft CD backward you can hear satanic messages..... but that's nothing, if you play it forward it will install Windows From philippe.gramoulle at mmania.com Sun Feb 27 22:40:10 2005 From: philippe.gramoulle at mmania.com (Philippe =?ISO-8859-15?Q?Gramoull=E9?=) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] libdts In-Reply-To: <200502261444.57353.comte@interia.pl> References: <200502261444.57353.comte@interia.pl> Message-ID: <20050227214010.8C5112297@philou.gramoulle.local> Hello Mike, On Sat, 26 Feb 2005 14:44:57 +0000 Michal Lorek wrote: | hi! | | Could anybody tell me how to configure mplayer with libdts support? when I try | compile mplayer with option --enable-libdts i get this error: |?dtsdec.c:27:17: dts.h: No such file or directory |?dtsdec.c:60: error: parse error before '*' token |?[snip] | | do I need any additional library to compile mplayer with this option? You need the libdts development files, which maybe shipped or not depending on the distro your use. For example, on Debian, you only need to install the libdts-dev package (apt-get install libdts-dev) Thanks, Philippe From comte at interia.pl Sun Feb 27 23:22:34 2005 From: comte at interia.pl (Michal Lorek) Date: Sat Mar 17 17:21:43 2007 Subject: [MPlayer-dvb] libdts In-Reply-To: <20050227214010.8C5112297@philou.gramoulle.local> References: <200502261444.57353.comte@interia.pl> <20050227214010.8C5112297@philou.gramoulle.local> Message-ID: <200502272222.34726.comte@interia.pl> Hello! thank you very much for all replies! I found libdts source here: http://ftp.debian.org/debian/pool/main/libd/libdts/ and after compiling that source and installing it I could configure my mplayer with dts support! thanks a lot! mike ---------------------------------------------------------------------- Tapety na pulpit! >>> http://link.interia.pl/f185d

---

Originally posted by GrandpaBW:

---

Originally posted by gwendolin:

---

@ZoSoIV

This is NOT a personal attack at you in any way, I just used your thread as an example...there are many members, including Newbies who are doing the same thing...it's only an opinion that I hold so if you think you are using it correctly then far be it for me to say otherwise.

@Varnull,

No use stocking up on any further popcorn for as far as I am concerned the matter is now a non event, I have made my thoughts quite clear.

---

I certainly don't agree with your view of using the quote feature, being a bad habit. I just don't understand your thought process.

---

Originally posted by this thread is still active??? :

---

Now if somebody feels the urge to come along and "further" the "quote" when will it end and as I said, whats the point.

---

Originally posted by gwendolin:

---

Originally posted by GrandpaBW:

---

Originally posted by gwendolin:

---

@ZoSoIV

This is NOT a personal attack at you in any way, I just used your thread as an example...there are many members, including Newbies who are doing the same thing...it's only an opinion that I hold so if you think you are using it correctly then far be it for me to say otherwise.

@Varnull,

No use stocking up on any further popcorn for as far as I am concerned the matter is now a non event, I have made my thoughts quite clear.

---

I certainly don't agree with your view of using the quote feature, being a bad habit. I just don't understand your thought process.

---

This is just what I am referring to, you have added my post as a "quote" and now I have added your post as a "quote"...now's it's a long space wasting post!!

Now if somebody feels the urge to come along and "further" the "quote" when will it end and as I said, whats the point.

---