|
Chronicles of Narnia prince Caspian sos sos sos
|
|
AfterDawn Addict
|
3. December 2008 @ 19:09 |
Link to this message
|
richmoral, its most likely you're ODD not the DVD
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
Advertisement
|
|
|
|
|
Car.Mike
AfterDawn Addict
|
3. December 2008 @ 20:27 |
Link to this message
|
richmoral,
You probably need to change your output in that program to 4350 or 4400 to make the size of the DVD 4.32. I do not use DVDFAB Plat as I use DVD-Rebuilder. I do know that the DVD using AnyDVD can take as Long as 10 minutes to analyze the DVD (per Slysoft's forum) and that depends on your syatem. On my system it took about 15 seconds but I am using a Quad-core
|
|
gvrz9
Junior Member
|
3. December 2008 @ 22:22 |
Link to this message
|
I have the same problem...
When you insert a dvd, everything looks fine. But when I'm trying to open AnyDVD, the disk ejects(!!!!!) and AnyDVD becomes frozen. It seems like AnyDVD could NOT handle it.
And I used both drives :)
|
|
richmoral
Newbie
|
3. December 2008 @ 23:02 |
Link to this message
|
|
No I only have the 1 drive. I normally would just go try it on my Macbook but I let it to a cousin of mine.
|
|
richmoral
Newbie
|
3. December 2008 @ 23:05 |
Link to this message
|
Originally posted by Car.Mike:
richmoral,
You probably need to change your output in that program to 4350 or 4400 to make the size of the DVD 4.32. I do not use DVDFAB Plat as I use DVD-Rebuilder. I do know that the DVD using AnyDVD can take as Long as 10 minutes to analyze the DVD (per Slysoft's forum) and that depends on your syatem. On my system it took about 15 seconds but I am using a Quad-core
OK then I guess it was just that one DVD. Only time I've had it freeze up on me like that. It's ok I got it done just using DVDPlatinum instead.
|
|
dbmay75
Newbie
|
5. December 2008 @ 15:25 |
Link to this message
|
Prince Caspian appears to use the same protection as Wall-E. If you use DVDFab 4.1.2.0 to decode and DVDFab 5.1.2.2 to rip, you shouldn't have any problems. I used a DVD9 so as not to sacrifice quality, but I'm a little disappointed with the transfer. I watch my movies on a 37" Toshiba HDTV using an OPPO DV-980H DVD player connected via HDMI, but the film upon preview looks grainy compared to some others. Just my two cents for ya'll.
Dan
When in doubt, reboot!
|
AfterDawn Addict
|
5. December 2008 @ 15:37 |
Link to this message
|
try DVD Rebuilder burning to a dvd-5 instead of using a dvd-9 and see if you get the same result ^^
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
This message has been edited since posting. Last time this message was edited on 5. December 2008 @ 16:02
|
Moderator
|
5. December 2008 @ 15:44 |
Link to this message
|
I was going to suggest the same but i re-read the post and a DVD-9 was used..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
|
5. December 2008 @ 16:01 |
Link to this message
|
I had the same problem with Departed burning to a dvd-9 (fuzzy picture) tryed it again same problem so i used DVD Rebuilder burning to a dvd-5 and had great results
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
This message has been edited since posting. Last time this message was edited on 5. December 2008 @ 18:21
|
Moderator
|
5. December 2008 @ 16:52 |
Link to this message
|
Good stuff. I just don't/won't use DL media, just DVD Rebuilder.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
5. December 2008 @ 17:44 |
Link to this message
|
@richmoral
Enable newest version of AnyDVD 6490 and let it read the disc. There is a lot of crap on the disc. You're pc is probably not locking up, some discs just take longer for anydvd to read (especially if you have an older slow drive) - give it at least 2 or 3 minutes. PC was not hard. I did movie only.
|
AfterDawn Addict
|
6. December 2008 @ 00:47 |
Link to this message
|
Originally posted by creaky:
Good stuff. I just don't/won't use DL media, just DVD Rebuilder.
Great minds think alike. Yep, that's me... DVD-Rebuilder Pro + CCE SP2 and or Recode 3 (Advanced Analysis + High Quality + Assign Best Quality to Main Movie" and I'll be enjoying my backups on my 51" SONY HDTV.
|
AfterDawn Addict
|
6. December 2008 @ 02:45 |
Link to this message
|
yeah i see no reason to spend 1.70 per blank disc for a dvd-9 when you can use DVD Rebuilder and spend 23 cent each per blank disc for a dvd-5. and doing the movie only most the time you don't even need DVD Rebuilder. the only time i use a blank dvd-9 is to backup Concert DVDs
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
|
6. December 2008 @ 09:10 |
Link to this message
|
|
I do use DL discs, but only for movies that are a 10 in my enjoyment. I bet I haven't burnt 30 DLs in 3 years, but I can.
|
AfterDawn Addict
3 product reviews
|
6. December 2008 @ 10:52 |
Link to this message
|
I'm also not one much for DL burning. Dvd Rebuilder works wonders for high compression situations. I'll stick with that.
|
Junior Member
|
6. December 2008 @ 19:37 |
Link to this message
|
|
okay guys...i havent had to be on here in awhile..but this is one i am having problems with..have done just about everything suggested..still no luck...the last one came back from shrink and said..."Invalid access to memory location"..it just shows alittle in the beginning and then goes green..sometimes even freezes my computer...can someone please explain this and what i may be doing wrong...would be greatly appreciated..thanks
round or flat?
|
AfterDawn Addict
3 product reviews
|
6. December 2008 @ 23:01 |
Link to this message
|
|
Do you have the preview window open in Shrink?
|
Junior Member
|
6. December 2008 @ 23:06 |
Link to this message
|
|
at the time..yes..that's when it starts then...it goes green...and pops up the message as said above..i know the movis is there i checked for it first.
round or flat?
|
AfterDawn Addict
3 product reviews
|
6. December 2008 @ 23:12 |
Link to this message
|
|
Try turning your preview window off.
What program are you using to rip?
This message has been edited since posting. Last time this message was edited on 6. December 2008 @ 23:13
|
|
Ninja49
Junior Member
|
7. December 2008 @ 00:18 |
Link to this message
|
Originally posted by garmoon:
@richmoral
Enable newest version of AnyDVD 6490 and let it read the disc. There is a lot of crap on the disc. You're pc is probably not locking up, some discs just take longer for anydvd to read (especially if you have an older slow drive) - give it at least 2 or 3 minutes. PC was not hard. I did movie only.
Hi Garmoon, what did you use after checking with AnyDVD? I used version 6.4.9.0 and it found all the protections, but the DVD Decrypter couldn't do anything with it? It took 3 hours and ended up using up my entire hard drive for uselss sectors and still couldn't finish decrypting the dvd. I aborted it and used CloneDVD to just rip the movie. That was successful! anyone has a working combo that can replace DVD Decrypter, i think this software is getting out of date. Please advise!!
|
AfterDawn Addict
|
7. December 2008 @ 00:45 |
Link to this message
|
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
|
7. December 2008 @ 03:28 |
Link to this message
|
|
Junior Member
|
7. December 2008 @ 08:23 |
Link to this message
|
|
7thsinger:
if you r refering to th burn then it is one of two...shrink or roxio..
round or flat?
|
Junior Member
|
7. December 2008 @ 10:25 |
Link to this message
|
|
okay guys! Finally got it...got it with DVDfab5 and shrink..movie only as some of you have said to do...don't know why it worked this time though..lol
thanks for all of your input...i knew i could count on ya..take care
round or flat?
|
|
Advertisement
|
|
|
AfterDawn Addict
|
7. December 2008 @ 10:39 |
Link to this message
|
@Ninja49
Doesn't look like you needed any info. You got it with Clone. I got it with NeroRecode also movie only.
@winnipoo
Quote:
.don't know why it worked this time though..lol
thanks for all of your input..
You got it because you finally got the right updated tools that worked for PC. If you can get a clean rip to your HDD then Shrink or almost anything can trans/re code the movie and burn it! Good going.
|
