After the fact

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Thursday 12.3.2026 / 05:54

Search AfterDawn Forums:

afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > after the fact

Browse by topic

Forums

Start a new thread

After the fact

Jump to:

Posted

Message

joebaxter

Suspended due to non-functional email address

21. July 2005 @ 16:26

Link to this message

I just flashed my Slimtype DVDRW SOSW-852S i restarted my computer and now i just ran nero info tool
and it all says the same settings. how do i know if it actually upgraded anything or if my speed went to 8x ?

thanks

joebaxter

[ + quote]

squizzle

AfterDawn Addict

21. July 2005 @ 17:45

Link to this message

did you get hacked firmware for this? If you did you need the new burner's eeprom file, then patch it before flashing. Then get the new burner's firmware and patch that before flashing.

Check out http://club.cdfreaks.com for more info.

[ + quote]

Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html

My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle

binkie7

Moderator

21. July 2005 @ 18:38

Link to this message

joebaxter
NeroInfoTool will give you the latest firmware on your drive on the drive tab. If it's still the same it didn't take.
Follow squizzle's advice.

[ + quote]

Forum Rules
Do this before posting
Do not click this link...

binkie7

Moderator

21. July 2005 @ 18:39

Link to this message

joebaxter
NeroInfoTool will give you the latest firmware on your drive on the drive tab. If it's still the same it didn't take.
Follow squizzle's advice.
Here's your latest firmware:
http://forum.rpc1.org/dl_result.php?kaj=1&isces

[ + quote]

Forum Rules
Do this before posting
Do not click this link...

joebaxter

Suspended due to non-functional email address

22. July 2005 @ 09:44

Link to this message

thanks all for the help

>> just downloaded PSX3.EXe what it did was it updated my firmware from PDS1 to PSX3

Nero InfoTool 3.02

Drive Information
------------------
Drive : Slimtype DVDRW SOSW-852S
Type : DVD±R/RW DL Recorder
Firmware Version : PSX3
Buffer Size : 2 MB
Date : 2004-12-30
Serial Number
Vendor Specific : 2004/12/30 20:26
Drive Letter : D:\
Location : 1:0
Mechanism : Tray
Read Speed : 8.0 , 6.0 , 4.0 , 2.0 X
Write Speed : 4.0 , 2.4 X
>> i just try tried to burn a move that was on my hard drive and in the burn speed in nero's options its still saying 4.0 does this mean that the firmware was upgrade and not the speed or what ?

Thanks

joebaxter

[ + quote]

binkie7

Moderator

22. July 2005 @ 10:01

Link to this message

It depends on the disc. Some support higher burning speeds than the specified speed. Example: TY's 8x can be burned up to 12x.
Faster burn speeds increase the error ratio - so burning at max can produce coasters/ playback problems.
My rule of thumb is 1/2 of what my burner supports as long the media supports that speed. Examples - 16x burner with 8x disc - I burn at 8x, if using a 4x I burn at 4x.
What blank discs are you using?

[ + quote]

Forum Rules
Do this before posting
Do not click this link...

joebaxter

Suspended due to non-functional email address

22. July 2005 @ 10:12

Link to this message

@ binkie7

>> thanks for the qick resoponse :)
usually i use any DVD+R since i have burning down i usually don't have a problem. but they are usually

120min/4.7GB 1-4x SPEED/VITESSE > they are usually any brand
so what i'm getting out of your earlier post is that it depend on the actually dvd that i'm using not my Burner ?

thanks

joebaxter

btw > is there anywhere any these foorm's that shows you how to add a signature or a picture like i see everyone that has one. since AD owns all i will be here for a while

[ + quote]

binkie7

Moderator

22. July 2005 @ 11:15

Link to this message

joebaxter
I'm quessing you have a blank disc in the drive when you posted the drive info. If so it's telling you the speeds this disc can be written to. The disc does not support a higher writing speed - if it did Nero would show that. You can also find the supported write speeds and manufacturer id on the disc tab.
If I don't have a blank disc inserted in the drive I'm looking up Nero just defaults to the cd read and write speeds.
You drive supports writing at 8x +R so if you want to burn at max you'll need either 8x discs or say 4x (TY or verbatim) that support higher burn speeds. If you want to burn at max (I don't recommend) use good quality media only - Taiyo Yuden or Verbatim. Actually you should always use quality media - those iffy or off brands will cause you problems.
The burn speed depends on what your disc and burner support.
It also looks like the firmware up date took. This update was to match more media - very generic - they usually are.
I hope this helps.
As for the sig try this thread:
http://forums.afterdawn.com/thread_view.cfm/196253

[ + quote]

Forum Rules
Do this before posting
Do not click this link...

This message has been edited since posting. Last time this message was edited on 22. July 2005 @ 11:17

squizzle

AfterDawn Addict

22. July 2005 @ 19:28

Link to this message

I got a tool from club.cdfreaks.com called omnipatcher that lets you customize LiteOn burners. When I did this I found that just because your burner says it can burn +R discs at 8x, that's not necessarily all +R discs. Omnipatcher let me select different speeds for different discs.

[ + quote]

Start a new thread

afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > after the fact


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.