|
help me my xbox/pc has gone mental.
|
|
|
gazza1988
Suspended due to non-functional email address
|
6. August 2005 @ 12:47 |
Link to this message
|
|
i need to ftp some files to my xbox. but whenever i connect it just says "a network cable is unplugged", then it goes off, then it pops up again, it does this all the time now. whereas a week ago i could use it perfectly. i have space on my xbox, the settings are correct (i think!).
i.p. on computer set as: 192.168.0.224
i.p. on xbox set as 192.168.0.225
if it helps im using: evox: +3935
and i am using a crossover cable
every time is says a network cable is unplugged immediately after it either says aquiring network address or connected, but the IP on evox doesnt say anything.
plus whenever i turn off my xbox the not connected cable message stays up but when i turn on xbox its starts connecting then no cable.
Mansfield Town Rules!!!!
This message has been edited since posting. Last time this message was edited on 6. August 2005 @ 13:04
|
|
Advertisement
|
|
|
|
|
Ichijoe
Senior Member
|
6. August 2005 @ 13:57 |
Link to this message
|
|
Sounds to me like you have DHCP active on Evox it might help to turn that off and use a more Static IP Address...
|
|
gazza1988
Suspended due to non-functional email address
|
6. August 2005 @ 14:07 |
Link to this message
|
|
how do i disable it on evox, it is disabled in avalaunch, and i have static ip set to yes in my evox settings.
when i go into evox settings i get this
(the following flash on then off)
type: Static
IP: 12.168.0.225
Line status: 100/Full duplex (this becomes "no link" when the above flash off)
Mansfield Town Rules!!!!
|
|
gazza1988
Suspended due to non-functional email address
|
6. August 2005 @ 23:08 |
Link to this message
|
|
it worked fine about 1-2 weeks ago, but now i want to transfer some saves from xbox-saves and some musi using xbox soundtrack editor. so it isnt flashfxp(i tried) or soundtrack editor or xbox save manager.
could something have come out of the inside of the xbox(the cable is securely in)
Mansfield Town Rules!!!!
|
|
nevwst
Member
|
7. August 2005 @ 10:21 |
Link to this message
|
|
hiya
ok try going into your network settings on your xbox and make sure that it is enabled ..... enable your static IP, what client are you using to ftp your pc and xbox and try switching off your firewalls
|
|
Ichijoe
Senior Member
|
8. August 2005 @ 02:19 |
Link to this message
|
Quote:
when i go into evox settings i get this
(the following flash on then off)
type: Static
IP: 12.168.0.225
Line status: 100/Full duplex (this becomes "no link" when the above flash off)
Sounds to me like you need to set your EovX to 'Static' and then scrool down to the IP: Adress and change it from '12.168.0.225'. To something that matches your localhost. If in your OP you said that your Machine was set to '192.168.224'. Then try setting the IP: Address on the XBOX? to something like... '192.168.0.225 ~ 255'.
Also make sure that your Subnet is set to somthing as default as '255.255.255.0'
|
|
gazza1988
Suspended due to non-functional email address
|
8. August 2005 @ 09:11 |
Link to this message
|
|
my xbox ip has stayed the same(i meant to put 192.xxx.x.xxx not 12.xxx.x.xxx) i havent changed a thing on it.
under network i have the above. then
setup ntwork--------yes
static ip-----------yes
ip------------------192.168.0.225
subnetmask----------255.255.255.0
default gateway-----192.168.0.1
dns-----------------0.0.0.0
dns-----------------0.0.0.0
setup delay---------50
skip setup if no link-no
unless its the cable.
Mansfield Town Rules!!!!
|
|
nevwst
Member
|
8. August 2005 @ 09:34 |
Link to this message
|
|
try changing your setup delay to 5 and not 50
|
|
gazza1988
Suspended due to non-functional email address
|
8. August 2005 @ 10:35 |
Link to this message
|
ive set it to 5 but no luck. the xbox has stopped flashing Quote:
when i go into evox settings i get this
(the following flash on then off)
type: Static
IP: 12.168.0.225
Line status: 100/Full duplex (this becomes "no link" when the above flash off)
but now when i turn on my xbox and enable my lan connection, then under "network connections" it says "aquiring network address", then it says "connected", immediately after that i get "a netork cable is unplugged" then it alternates between "a network cable is unplugged" and "connected" untill i get fed up and disable the device or turn off the xbox.
Mansfield Town Rules!!!!
This message has been edited since posting. Last time this message was edited on 8. August 2005 @ 11:26
|
|
nevwst
Member
|
8. August 2005 @ 12:22 |
Link to this message
|
ok lets try this from the top bare with me and lets see if this works ...... your using a crossover cable....?
xbox network settings .... setup network-yes, use static ip-yes make your xbox ip to 192.168.0.3 subnetmusk 255.255.255.0 then go onto setup delay 5, then skip setup if no link yes, go to FTP under enable choose yes, Telnet enable dont forget to save your changes
then go to your LAN connection settings choose (TCP/IP)change the properties IP 192.168.0.4 subnetmusk 255.255.255.0 now rebot your xbox then open your client you using to ftp in my case i use FlashFXP click on the quick connect icon and then for the URL use 192.168.0.3 password:username xbox:xbox providing you have not changed your password:username and then connect
this hopefully should work when you connect dont handle the game pad
if this don't work check your crossover cable and pc and xbox connections make sure that they are not lose or faulty
good luck
|
|
gazza1988
Suspended due to non-functional email address
|
8. August 2005 @ 12:50 |
Link to this message
|
|
no that doesnt work. i think its down to the ethernet cable because it seems to connect, then there is no cable, then there is.
Mansfield Town Rules!!!!
|
|
nevwst
Member
|
8. August 2005 @ 21:52 |
Link to this message
|
|
you are using a cross over cable hey if you are then try getting a new one and see
|
|
gazza1988
Suspended due to non-functional email address
|
9. August 2005 @ 13:30 |
Link to this message
|
Mansfield Town Rules!!!!
|
|
nevwst
Member
|
10. August 2005 @ 08:05 |
Link to this message
|
|
is this a trick question ........ lol lol........unless i'm missing something they are pretty much the same the first one Unshielded twisted pair (UTP) and the other.... Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
remember you can check if you have a crossover cable by checking the coloured wires they should be the opposite say one end is green, red, blue, black, orange the other one should be orange, black, blue, red, green something like that ........ HOPE THIS HELPS
|
|
gazza1988
Suspended due to non-functional email address
|
13. August 2005 @ 12:00 |
Link to this message
|
|
the new cable has proven sucessful.
many, many thanks.
gav
Mansfield Town Rules!!!!
|
|
Advertisement
|
|
|
|
nevwst
Member
|
13. August 2005 @ 15:52 |
Link to this message
|
|
nice going glad its working fine mate ............ enjoy
|
