|
|
|
black hawk down
|
|
|
urmymom
Junior Member
|
10. August 2005 @ 07:20 |
Link to this message
|
|
help, i can not backup this game......
i have tried all programs and each one gives me an error. could it be the dvd? i have tried this on another computer and get the same problems.
this error is from dvd decrypter. i put the mdf/mds file in my documents (that went fine) then i went to write and got this message. i have been trying to do this for 1 week. i have even gone to the extreme of reformating my hard drive and fresh installing everything (thinking maybe one of my settings were off) i have no problems with any other games, only this one.
has anyone sucessfully backed up this game? if so what are the complete steps that you took, programs.
this is the error from dvd decrypter.
I 10:46:14 DVD Decrypter Version 3.5.4.0 started!
I 10:46:14 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 10:46:14 Initialising SPTI...
I 10:46:14 Searching for SCSI / ATAPI devices...
I 10:46:14 Found 1 DVD-ROM, 1 DVD-ROM/CD-RW and 1 DVD±RW!
I 10:46:41 Operation Started!
I 10:46:41 Source File: C:\Documents and Settings\My Documents\black hawk\alchol iso\DFBHDUS.mds
I 10:46:41 Source File Sectors: 732,304 (MODE1/2048)
I 10:46:41 Source File Size: 1,499,758,592 bytes
I 10:46:41 Source File Application Identifier: PLAYSTATION
I 10:46:41 Source File Implementation Identifier: DVD-ROM GENERATOR
I 10:46:41 Destination Device: [0:0:0] MAD DOG MD-16XDVD9 2.F6 (K:) (USB)
I 10:46:41 Destination Media Type: DVD-R (Disc ID: ProdiscF01) (Speeds: 2x, 4x, 6x, 8x)
I 10:46:41 Destination Media Sectors: 2,298,496
I 10:46:41 Write Mode: DVD
I 10:46:41 Write Type: SAO
I 10:46:41 Write Speed: 1x
I 10:46:41 Link Size: Auto
I 10:46:41 Test Mode: Yes
I 10:46:41 BURN-Proof: Enabled
I 10:46:41 Filling Buffer...
I 10:46:43 Writing LeadIn...
W 10:46:50 Failed to Write Sectors 0 - 31 - The semaphore timeout period has expired.
W 10:46:50 Retrying (1 of 20)...
W 10:46:51 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 10:46:51 Retrying (2 of 20)...
W 10:46:51 Retry Failed - The semaphore timeout period has expired.
W 10:46:51 Retrying (3 of 20)...
W 10:46:52 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 10:46:52 Retrying (4 of 20)...
W 10:46:52 Retry Failed - The semaphore timeout period has expired.
W 10:46:52 Retrying (5 of 20)...
I 10:46:53 Writing LeadIn...
W 10:47:06 Failed to Write Sectors 832 - 863 - The semaphore timeout period has expired.
W 10:47:06 Retrying (1 of 20)...
W 10:47:06 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 10:47:06 Retrying (2 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (3 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (4 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (5 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (6 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (7 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (8 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (9 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (10 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (11 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (12 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (13 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (14 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (15 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (16 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (17 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (18 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (19 of 20)...
W 10:47:06 Retry Failed - Write Error
W 10:47:06 Retrying (20 of 20)...
W 10:47:06 Retry Failed! - Write Error
E 10:57:51 Failed to Write Sectors 832 - 863 - The semaphore timeout period has expired.
I 10:57:51 Synchronising Cache...
I 10:57:51 Cycling Tray after Test Write...
HERE IS ALCOHOL SIMULATION PASSED:::::::
########################### System Information ###########################
Windows XP Home Edition 5.1 Service Pack 2 (Build 2600)
Processor info: Intel(R) Pentium(R) 4 CPU 3.00GHz x 2 (2992MHz)
Memory Available to Windows: 523,244 KB
############################ Program Information ###########################
File Name: C:\Program Files\Alcohol Soft\Alcohol 120\Alcohol.exe
Company Name: Alcohol Soft Development Team
Description: Alcohol 120%
Original: alcohol.exe
Product: Alcohol 120%
Trademarks: Alcohol Soft Development Team
Copyright: Copyright(C) 2002-2004 Alcohol Soft Development Team
Version: 1.9.2 ( Build 1705 )
Date: 2004/05/06
Size: 1378304 Bytes
Hash: 7e9552025078b455c4c3d666f57dd414
Hash(1): d1a6ee7f2a592332d01c55e3cbc5c0e68bc7c1025c3ae22a91c973f2eaccdaf
Hash(2): 36e6bf475a1b6e7f9fe092ca81805e29f3fff9af96596597c1e393d6cb926a0
File Name: C:\Program Files\Alcohol Soft\Alcohol 120\alcoholx.dll
Description: Alcohol virtual device control library
Original: alcoholx.dll
Copyright: Copyright (C) 2000-2004
Version: 3.47.0 ( Build 0 )
Date: 2004/04/30
Size: 74240 Bytes
Hash: c11b59c21722ca30141696c21b72578d
File Name: C:\Program Files\Alcohol Soft\Alcohol 120\devsupp.dll
Company Name: Alcohol Soft Development Team
Description: Alcohol Software Device Capability Library
Original: devsupp.dll
Product: Alcohol Software Device Capability Library
Copyright: Copyright(C) 2002-2003 Alcohol Soft Development Team
Version: 2.3.7 ( Build 505 )
Date: 2004/05/05
Size: 38400 Bytes
Hash: 0e6f733d3f570f3b0328261d11a2794e
########################### Options Setting ###########################
Devices control interface: Default Driver Control Interface
CPU Priority Level: High
Memory Buffer Size (MB): 128
Examine the accuracy of data read from physical device: Yes
Turn off "Auto-Select best write speed" function if possible: No
Overburn disc(s): No
Fill memory buffer before recording discs: Yes
Ignore Media Type: Yes
RMPS (Recordable Media Physical Signature) Emulation: No
BAD Sectors Emulation: No
Sub-Channel Data Fixed & Emulation: No
Laserlock Emulation: No
Current Language: English
############################ Device(s) List ############################
(E:) HL-DT-ST RW/DVD GCC-4241N (atapi, Port 1, Bus 0, Target 0, Lun 0)
(K:) MAD DOG MD-16XDVD9 (USBSTOR, Port 0, Bus 0, Target 0, Lun 0)
(L:) AXV CD/DVD-ROM (a347scsi, Port 2, Bus 0, Target 0, Lun 0)
##################### Installed Device Drivers List #####################
1394BUS.SYS a347bus.sys a347scsi.sys ACPI.sys ACPIEC.sys
AegisP.sys afd.sys AFS2K.SYS agp440.sys arp1394.sys
ASCTRM.SYS ATMFD.DLL audstub.sys BATTC.SYS Beep.SYS
BOOTVID.dll camcaud.sys camchal.sys Cdfs.SYS cdrom.sys
CLASSPNP.SYS CmBatt.sys compbatt.sys disk.sys drmk.sys
dump_atapi.sys dump_WMILIB.SYS Dxapi.sys dxg.sys dxgthk.sys
EABFiltr.sys EMCR7SK.sys ENECBPTH.sys Fastfat.SYS Fips.SYS
fltmgr.sys Fs_Rec.SYS ftdisk.sys GearAspiWDM.SYS hal.dll
HIDCLASS.SYS HIDPARSE.SYS hidusb.sys HPZid412.sys HPZipr12.sys
HPZius12.sys HSF_CNXT.sys HSF_DP.sys HSFHWICH.sys HTTP.sys
i8042prt.sys imapi.sys intelppm.sys ipnat.sys ipsec.sys
irda.sys irenum.sys isapnp.sys itchfltr.sys kbdclass.sys
KDCOM.DLL kmixer.sys ks.sys KSecDD.sys mdmxsdk.sys
mnmdd.SYS Modem.SYS mouclass.sys mouhid.sys MountMgr.sys
mrxdav.sys mrxsmb.sys Msfs.SYS msgpc.sys mssmbios.sys
Mup.sys MxlW2k.SYS NaiFiltr.sys NDIS.sys ndistapi.sys
ndisuio.sys ndiswan.sys NDProxy.SYS netbios.sys netbt.sys
nic1394.sys Npfs.SYS nscirda.sys ntdll.dll Ntfs.sys
ntoskrnl.exe Null.SYS nv4_disp.dll nv4_mini.sys ohci1394.sys
OPRGHDLR.SYS parport.sys PartMgr.sys ParVdm.SYS pci.sys
pciide.sys PCIIDEX.SYS pcmcia.sys portcls.sys PQIMount.SYS
PQV2i.sys psched.sys ptilink.sys PxHelp20.sys rasacd.sys
rasirda.sys rasl2tp.sys raspppoe.sys raspptp.sys raspti.sys
rdbss.sys RDPCDD.sys redbook.sys Rtlnic51.sys SCSIPORT.SYS
serenum.sys serial.sys sr.sys srv.sys strmdisp.sys
swenum.sys SynTP.sys sysaudio.sys tcpip.sys TDI.SYS
termdd.sys Udfs.SYS update.sys usbccgp.sys USBD.SYS
usbehci.sys usbhub.sys USBPORT.SYS usbprint.sys USBSTOR.SYS
usbuhci.sys vga.sys VIDEOPRT.SYS VolSnap.sys wanarp.sys
wanatw4.sys watchdog.sys wdmaud.sys win32k.sys wmiacpi.sys
WMILIB.SYS
################## Detailed Information of Device(s) ##################
///////////////////////////////////////////////////////////////////////
(E:) HL-DT-ST RW/DVD GCC-4241N(1:0) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: HL-DT-ST
Product Identification: RW/DVD GCC-4241N
Production Revision Level: 0C29
Location: atapi, Port 1, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), TAO
BURN-Free Technology: BURN-Proof
Auto-Select best write speed: Not Supported
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/No
DVD-RAM Read/Write: Yes/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: No
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: No
R-W De-interleaved and Corrected: No
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
Maximum Read Speed Supported (with current disc): 24X (3600 KB/Sec)
Maximum Write Speed Supported (with current Disc): 24X (3600 KB/Sec)
Current Read Speed Supported (with current Disc): 24X (3600 KB/Sec)
Current Write Speed Supported (with current Disc): 24X (3600 KB/Sec)
///////////////////////////////////////////////////////////////////////
(K:) MAD DOG MD-16XDVD9(USB:0) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: MAD DOG
Product Identification: MD-16XDVD9
Production Revision Level: 2.F6
Location: USBSTOR, Port 0, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), DVD DAO
BURN-Free Technology: Unknown
Auto-Select best write speed: Not Supported
*** NOT listed in Alcohol's database. Please report to development team
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/Yes
DVD-RAM Read/Write: No/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: No
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: No
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
Maximum Read Speed Supported (with current disc): 48X (7200 KB/Sec)
Maximum Write Speed Supported (with current Disc): 48X (7200 KB/Sec)
Current Read Speed Supported (with current Disc): 48X (7200 KB/Sec)
Current Write Speed Supported (with current Disc): 24X (3600 KB/Sec)
#######################################################################
###################### Source Disc/Image Information ######################
Type: Media Descriptor Image file
Path: C:\Documents and Settings\My Documents\black hawk\alchol iso\
Name: DFBHDUS.mds
DFBHDUS.mdf
Size: 1430.28 MB
Session: 1
Track: 1
Session 01:
Track 01: DVD, Length: 732304(1.40 GB), Address: 000000
#############################################################################
####################### Dumping/Recording Progress Log #######################
11:05:47 Processor info: Intel(R) Pentium(R) 4 CPU 3.00GHz x 2 (2992MHz)
11:05:47 Memory Available to Windows: 523,244 KB
11:05:47 Memory Buffer size: 128 MB
11:05:48 Image file loading: C:\Documents and Settings\My Documents\black hawk\alchol iso\DFBHDUS.mds
11:05:48 DVD Source Info: Session: 1, Track: 1, Length: 1.40 GB / 162:44:04
11:05:55 (K:) MAD DOG MD-16XDVD9(USB:0): Recording Method/Speed
11:05:55 Simulated recording - DVD DAO - 4.0X (5520 KB/Sec)
11:10:18 Image file loading completed!
11:10:52 (K:) MAD DOG MD-16XDVD9(USB:0): Simulated recording completed!
11:10:52 Elapsed Time: 00:04:57, Average speed: 4.1X
11:10:56 All recording procedures have been completed!
11:10:56 Elapsed Time: 00:05:04
AND THEN I GET THIS AFTER TRYING TO WRITE:
Dumping/Recording Progress Log #######################
11:13:51 Processor info: Intel(R) Pentium(R) 4 CPU 3.00GHz x 2 (2992MHz)
11:13:51 Memory Available to Windows: 523,244 KB
11:13:51 Memory Buffer size: 128 MB
11:13:51 Image file loading: C:\Documents and Settings\My Documents\black hawk\alchol iso\DFBHDUS.mds
11:13:51 DVD Source Info: Session: 1, Track: 1, Length: 1.40 GB / 162:44:04
11:13:59 (K:) MAD DOG MD-16XDVD9(USB:0): Recording Method/Speed
11:13:59 Recording - DVD DAO - 2.0X (2760 KB/Sec)
11:14:50 (K:) MAD DOG MD-16XDVD9(USB:0) - [Write ERROR] LBA: 16, Length: 16
S:KEY - 05/21/02 - "Invalid Address For Write"
11:14:50 (K:) MAD DOG MD-16XDVD9(USB:0): Recording failed!
11:14:50 Error message: [05/21/02] - Invalid Address For Write
11:14:50 (K:) MAD DOG MD-16XDVD9(USB:0): Recording failed!
11:14:50 Image file loading aborted!
11:14:53 Something is wrong with the recording procedure!
Please check the log file and report any errors to Technical Support.
##############################################################################
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
10. August 2005 @ 07:46 |
Link to this message
|
what disks are they??,have you burned with them before?
Quote:
"Invalid Address For Write"
your burner doesnt recognise them by the sounds of it
update the firmware
also i notice you are using a burner on a usb cable
read through this lot
http://forums.afterdawn.com/thread_view.cfm/218075
and then also nero to burn with
This message has been edited since posting. Last time this message was edited on 10. August 2005 @ 07:51
|
|
urmymom
Junior Member
|
10. August 2005 @ 08:27 |
Link to this message
|
what disks are they??,have you burned with them before?
Quote:"Invalid Address For Write"
your burner doesnt recognise them by the sounds of it
update the firmware
dumb question, but how do i update my firmware? the externals firmware? i went to mad dog and found it, but i am afraid to update. can i screw it up?
also i notice you are using a burner on a usb cable
i have also tried to do it on another computer with an internal, which i am going to try again in a couple of minutes.
read through this lot
http://forums.afterdawn.com/thread_view.cfm/218075
and then also Nero to burn with
i have done the isobuster and then new comp with Nero onto a DVD+R and it copied fine, but it wont load.... normally it starts the lead and then fails to burn.
many coaster, actually i am going to make a mobile cd hanger lol. who needs this many coasters.
this is the first time that i have ran into any troubles, i am using "cheap" media. fujifilm DVD-R and hp DVD+R. its weird i have backed up about 26 dvd with only a couple of operator errors.
i am going to try on the other dvd. i am going to try and use the isobuster and Nero method. when i do this should i name the dvd the same as it is named (original name) instead of the default "NEW"? would this make a difference.
thanks hursty, this is not the first time that you have HELPED me and it wont be the LAST!!!
|
AfterDawn Addict
|
10. August 2005 @ 09:07 |
Link to this message
|
no it shoudnt make much difference
but when i said use Nero,i didnt mean isobuster/nero
just a straight burn
|
|
urmymom
Junior Member
|
10. August 2005 @ 10:23 |
Link to this message
|
okay something really weird is going on........
i decided to give it a break and backup my movies instead. well none of them are working either.
in DVD Shrink i am getting the error.
dvd shrink encountered an error and cannot continue
failed to read file "E:\"
data error (cycle redundancy check.
it doesnt matter which computer i am on. there is no way that 3 discs are no good?
yesterday i reformated my hard drive and reinstalled everything on my notebook computer, so i dont think it is a setting?
WTF is going on? aliens????
|
AfterDawn Addict
|
10. August 2005 @ 10:27 |
Link to this message
|
Quote:
Destination Media Type: DVD-R (Disc ID: ProdiscF01)
if you are using just these,then yes...these are crap
|
|
urmymom
Junior Member
|
10. August 2005 @ 10:32 |
Link to this message
|
i am also using hp DVD+R 8x for movies. you would think i would have had problems from the beginning, not just now.
|
AfterDawn Addict
|
10. August 2005 @ 10:34 |
Link to this message
|
HP media are no better,but like i said before,movies are easier to boot than ps2 games
i dont like,and never will like external burners though
did you try and use Nero to burn?
|
AfterDawn Addict
|
10. August 2005 @ 10:38 |
Link to this message
|
just noticed something that you said,you said you have tried HP DVD+R
how did you burn these??????
Quote:
DVD-R Read/Write: Yes/Yes
it says you can only burn DVD-R TYPE
unless this is alcohol not being able to pick the drive up correctly
Quote:
*** NOT listed in Alcohol's database. Please report to development team
-* Note: This information below is provided by the unit, it might be inaccurate. *-
This message has been edited since posting. Last time this message was edited on 10. August 2005 @ 10:40
|
|
urmymom
Junior Member
|
10. August 2005 @ 11:03 |
Link to this message
|
just noticed something that you said,you said you have tried HP DVD+R
how did you burn these??????
these have burned fine in the past. all my dvd were fine in the past.....
Quote: DVD-R Read/Write: Yes/Yes
it says you can only burn DVD-R TYPE
unless this is alcohol not being able to pick the drive up correctly
Quote: *** NOT listed in Alcohol's database. Please report to development team
-* Note: This information below is provided by the unit, it might be inaccurate. *-
i have burned before with all the programs and dvds before with no problems, this is the weird part.
should i try to flash my dvd burners? and then try again. i cant even get past DVD Decrypter, so it has nothing to do with the my media.
i am now getting this error, on my upstairs computer
i/o error!
device [3:0:0] hp dvd writer 300n 3.15 E; ata
scsistatus: 0x02
interpretation: check condition
cdb: 28 00 00 10 53 f0 00 00 01 00
interpretation: read (10)- sector: 1070064
sense area: f0 00 03 00 10 53 f0 0a 00 00 00 00 02 00 00 00 00 00
interpretaion: no seek complete
abort retry ignore
any suggestions?
incase it is my media, which i am highly at this time thinking, so for future purchase how is this media:
Sony 50-Pack 8x DVD-R Disc Spindle
Model: 50DMR47LS2
are there any that you recommend that, sorry to ask, go on sale? i always see 50 disk for $. which brands should i get and which to stay away from? i know now no FUJIFILM. i guess let them stay with cameras...? lol
will wait for reply before doing anything
thanks for your help
|
AfterDawn Addict
|
10. August 2005 @ 11:27 |
Link to this message
|
Quote:
i/o error!
device [3:0:0] hp dvd writer 300n 3.15 E; ata
scsistatus: 0x02
interpretation: check condition
cdb: 28 00 00 10 53 f0 00 00 01 00
interpretation: read (10)- sector: 1070064
you are trying to READ the game?...yes?
i/o errors may mean the disk is damaged or dirty
i would recommend also you read through the other information i gave you,(the link i gave you),as that may be your problem
and buying more disks may not be the answer
dvd decrypter, has the option to search to see if the firmware is up-to-date..is it???
sony's are o.k,but verbatims are better
|
|
urmymom
Junior Member
|
10. August 2005 @ 12:43 |
Link to this message
|
|
Hursty: whoo hoo i am doing the happy dance, well shuffle.... lol
this is what i have done to backup movies:
on my upstairs computer i upgraded to the latest version of dvd decryptor and then after if got (tried in insert Picture) didnt work.
it said
possible structure protection found
areas have been marked as "suspect"
dummy sectors will be inserted where necessary
ect...
never came accross this one yet....
but it worked....
now onto the game. i wish the game companies would replaced scratched disks/movies because then we wouldnt have to go through this just return for a working one..........
thanks, i am also going to try and update my firmware on my computer upstairs, or should i just leave it alone....
|
|
Advertisement
|
|
|
AfterDawn Addict
|
11. August 2005 @ 00:35 |
Link to this message
|
Quote:
possible structure protection found
areas have been marked as "suspect"
dummy sectors will be inserted where necessary
ect...
thats just the protection being removed by DVD Decrypter,(dvd decrypter is very powerful)....i didnt realise you were having problems cracking the protection on the movie)
btw,clonedvd2/anydvd combo is far better,but this discussion about movies belongs in the correct forum
anyways,.....did the movie burn?
if so,it cant be a problem with the burners firmware
now try,iso/read with the ps2 game...does it put it on the hardrive ok?
|
|
