|
|
|
DVD+RW works fine, DVD-R fails repeatedly
|
|
|
r1200gs
Newbie
|
12. August 2005 @ 08:19 |
Link to this message
|
|
I've been using Nero to burn Verbatim DigitalMovie DVD-R 4x with a Sony DRU700A successfully for several weeks. No coasters at all in the first 20 or so disks. Now suddenly I'm getting write failures repeatedly. I tested the burner with a Sony DVD+RW 8x and it works fine. Purchased a new pack of Verbatim DVD-R, burn fails every time.
So, am I wrong to assume that success with the +RW rules out any driver/ASPI/cabling/DMA/firmware/cleaning issues? What might this indicate besides bad media?
Also, Nero doesn't seem to be creating a log file. Does that have to be enabled somewhere?
Thanks!
|
|
Advertisement
|
 |
|
|
|
r1200gs
Newbie
|
12. August 2005 @ 08:25 |
Link to this message
|
|
Hmmm...probably should have chosen a more appropriate forum. Sorry.
Can you tell I'm a newbie?
|
Senior Member
|
12. August 2005 @ 08:47 |
Link to this message
|
Hi there,
Can you post us a full Nero log ! (Remove your Serial # on top).
There's lots of information in there that can help us, help you !
Or provide us much more information like:
What media are you using ? Brand / Media ID
VSO Inspector v1.1 --> http://www.vso-software.fr/
can provide the media id !
Also will tell us what's your burner model and firmware revision.
What speed are you burning those ?
What is the exact errors are you getting ?
Nero should create a log, once ok or failed, click on the LOG button, instead of the DONE one.
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
This message has been edited since posting. Last time this message was edited on 12. August 2005 @ 08:50
|
|
r1200gs
Newbie
|
13. August 2005 @ 05:55 |
Link to this message
|
Thanks. I'm using the Verbatim DVD-R which supposed to be the high-quality Metal AZO variety. From what I've gleaned from this forum so far, looks like it might be a Roxio driver problem.
I performed another test with the same result: DVD+RW burns just fine; DVD-R fails with an "illegal disk" error. Is that consistent with a driver problem?
Here's the log file:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:03:20 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 12:18:04 PM
Nero version: 6.3.1.10
Recorder: <SONY DVD RW DRU-700A> Version: VY08 - HA 1 TA 0 - 6.3.1.10
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS DVD+RW-D01 >Version: 1.41 - HA 1 TA 1 - 6.3.1.10
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160023A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-700A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+RW-D01 atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-700A D: CDRom0
PHILIPS DVD+RW-D01 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523276kB)
Free physical memory: 232MB (238336kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.8.2005
Burn DVD Image
6:29:15 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
6:29:15 PM #2 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-700A running
6:29:15 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -474681344
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=414:29.49 ( 1865224)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <F:\TempImage.nrg>
6:29:15 PM #4 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
6:29:15 PM #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1865223 (414:29.48, 3643MB)
6:29:15 PM #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
6:29:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
6:29:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:29:15 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 1865224 (1865224) = #1865224/414:29.49
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1865224 blocks [SONY DVD RW DRU-700A ]
--------------------------------------------------------------
6:29:15 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [SONY DVD RW DRU-700A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3819978752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1865224 | lead-out | 1 | 0x00 | 0x41
6:29:19 PM #11 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
6:29:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:29:20 PM #13 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 11:38,328 (698328ms) -> OK
6:29:20 PM #14 Text 0 File DVDR.cpp, Line 1642
Recording mode: Sequential Recording Mode
6:29:20 PM #15 Text 0 File Mmc.cpp, Line 20009
Set BUFE: Power-Burn -> ON , Generic write control : ON
6:29:20 PM #16 Text 0 File DVDR.cpp, Line 1783
Start write address at LBA 0
DVD high compatibility mode: Yes
6:29:20 PM #17 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:29:36 PM #18 Text 0 File Cdrdrv.cpp, Line 1291
18:29:36.562 - SONY DVD RW DRU-700A\H1 T0 : Queue again later
6:33:22 PM #19 SCSI -1046 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x18 0x70 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
6:33:22 PM #20 CDR -1046 File Writer.cpp, Line 304
Illegal disc
6:33:22 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:33:22 PM #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:33:22 PM #23 Text 0 File DVDR.cpp, Line 1993
EndDAO: Last written address was 6255
6:33:23 PM #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
6:33:23 PM #25 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
6:33:23 PM #26 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.84 , size=24576 bytes, created 5/14/2004 12:43:22 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/12/2005 8:24:18 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
r1200gs
Newbie
|
13. August 2005 @ 13:21 |
Link to this message
|
Hallelujah! Roxizap solved the problem. Note that the various pointers to Roxizap link to a generic help page at Roxio that doesn't mention Roxizap. I found it by using the search function.
I'm still puzzled about DVD+RW working fine but DVD-R failing to burn. Guess I don't know everything yet.
Thanks to all the contributors here. Browsing the various postings gave me the clues I needed to solve this problem.
|
|
Advertisement
|
|
|
Moderator
|
13. August 2005 @ 13:49 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
