|
|
|
Cannot burn to DVD+RW or DVD-R
|
|
|
sweetld
Newbie
|
14. August 2005 @ 19:39 |
Link to this message
|
I am trying to use the "Copy entire DVD-9 movie to a single DVD-R using DVD Shrink" guide provided on this site http://www.afterdawn.com/guides/archive/dvd9_to_dvdr_with_dvd_shr...
I have used DVD Decrypter to decode the DVD (The Magic Roundabout) and this worked perfectly, then used DVD Shrink 3.1 as instructed to remove anything unwanted to improve the compression ratio for the main movie. This also worked fine.
I then tried to Backup the movie striaght to my DVD drive, and the encoding worked fine too, however when it tried to burn the DVD it ran into problems.
It spat out both the Packard Bell DVD-R and Memorex DVD+RW blank discs that I have with errors. I got the Burn Error information below. If anyone can help I'd be very grateful as I used to be able to burn DVD's from this drive (although it's been a long while since I have done, and I have installed new stuff, and I think also gone up to XP SP2 since...)
Thanks !!
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:21:30
Nero API version: 6.6.0.6
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDRW IDE1008> Version: 0054 - HA 1 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : IC35L120AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616F D: CDRom0
DVDRW IDE1008 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 198MB (203600kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.8.2005
NeroAPI
04:15:06 #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
04:15:08 #2 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A0E5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x95 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x44
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
04:15:08 #3 Text 0 File Reader.cpp, Line 127
Reader running
04:15:08 #4 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE1008 running
04:15:08 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
04:15:08 #6 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
04:15:08 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
04:15:08 #8 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-At-Once, using DVD media
04:15:41 #9 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
04:15:41 #10 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO
04:15:41 #11 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: DVDRW IDE1008, Media type: DVD+R
Disc Manufacturer ID: OPTODISC, Media Type ID: OP1, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
04:15:41 #12 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
04:15:41 #13 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW IDE1008]
--------------------------------------------------------------
04:15:41 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [DVDRW IDE1008] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
04:15:41 #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
04:15:41 #16 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
04:15:41 #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
04:15:41 #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2x (2,770 KB/s)
04:15:41 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
04:15:41 #20 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: OPTODISC
Media type ID: OP1
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 00 4F 50 54 4F 44 - 49 53 43 4F 50 31 01 38 ...OPTODISCOP1.8
23 54 37 09 02 64 6A 02 - C8 63 18 18 0A 0A 0E 0E #T7..dj..c......
01 1B 1D 0B 0B 11 13 01 - 00 00 00 00 00 00 00 00 ................
04:17:48 #21 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes
04:17:50 #22 SCSI -1046 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A140000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x06
04:17:50 #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
04:17:50 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
04:17:50 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
04:17:50 #26 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x06
04:17:50 #27 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x06
04:17:50 #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
04:17:50 #29 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
04:18:14 #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2x (2,770 KB/s)
04:18:14 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
04:18:14 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 14. August 2005 @ 23:39
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
14. August 2005 @ 20:54 |
Link to this message
|
First you should remove your Nero serial numbers from your first post. Numbers beginning with 1A23.
You should update your Shrink. 3.1 is quite old. You can get Shrink here at Afterdawn or from my site:
http://www.dvdplusvideo.com/dvdshrink32setup.zip
You should update your Nero as well:
http://nero.com/us/nero-up.php
Nero makes a registry checker and driver cleaner tool as well. After removing and installing various programs the registry checker utility will correct the bugs that this seems to cause in Nero.
http://nero.com/us/Driver_CleanTool_and_RegistryChecker.html
You have DMA off it should be on:
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 1 DMA: Off
Here is a guide:
http://www.dvdplusvideo.com/dvdguide005.html
I would use different media like Taiyo Yuden, Ritek or Verbatim. You are getting an "illegal disc" message. That may be caused by the first error though so it might not be the problem. I don't care for either of the DVD brands you are using...
Make sure your firmware for your burner is up to date as well.
Here is ScubaPete's guide for Shrink/Nero:
http://www.dvdplusvideo.com/petesguide2.html
Try the above and see if things improve. Let us know.
Frank
This message has been edited since posting. Last time this message was edited on 14. August 2005 @ 20:56
|
|
The_OGS
Senior Member
|
14. August 2005 @ 21:14 |
Link to this message
|
Quote:
...then tried to Backup the movie striaght to my DVD drive
Didn't even look at your error yet, doesn't matter - you need to output from DVDShrink to your harddisk, a file on your harddisk (either ISO, or VOB files in a Video_TS folder).
Don't output to DVD directly...
You're using Nero I see.
You have a DVD player as master, and your DVD-RW as slave, on the same (secondary) controller. This is bad; a basic hardware misconfiguration.
Y'see, the burner is newer/faster/better, and it should be master.
Its DMA (direct memory access) will then be enabled. It might even come up UltraATA-66, with a good cable.
Now it's slaved to something older and it won't even DMA.
Never gonna get good burns with that!
Just pull the Samsung DVD out - who needs it?
Make your burner master (move the little jumper on the back).
Or WTF, leave the Samsung but make it slave or disconnect it internally (don't have the little plastic panel to fill the hole in your casefront? LoL :^)
What else...
Update your firmware to recognise new media! Nero is trying to burn 2x speed (compatibility), it doesn't recognise your blanks.
If you cannot find firmware, you must use older/different blanks.
Stay away from Memorex, the lads always say to anyone who'll listen...
I use DVD+R (got some Sony's right now).
What else?
As if you don't have enough problems, it's reporting a DRM error at the very end :^(
This could be Digital Rights Management (protected DVD content) but I dunno...
You are basically authoring the DVD with Nero here, I believe, and it is unnecessary. Write your output from Shrink to a harddisk; Shrink writes beautiful VOB files, a compliant DVD already.
You can then burn at your leisure, trying different blanks, whatever (you don't have to run Shrink each time!)
Those guides were written when harddisks were smaller and space was more expensive... these days, you need a hundred gigs free, 4.7GB is nothing :^)
Hope this helps,
Let us know how you get along.
ABit AB9 Pro
Intel Core 2 Duo E6420 @ 2.4GHz
2GB OCZ PC2-6400 Platinum XTC R2
ATI Radeon X1900XT 512MB
Enermax Liberty 620W
320GB/16MB WD, 150GB/16MB Raptor
Plextor PX-755SA DVD (SATA)
|
|
sweetld
Newbie
|
14. August 2005 @ 23:43 |
Link to this message
|
|
Thanks to Frank (have removed the serial numbers, thanks for highlighting that !!) & The_OGS for your replies I will be carefully following all the advice after work today, and will post an update of the results later this evening...
Hoepfully with good news !
Cheers
|
AfterDawn Addict
|
15. August 2005 @ 04:14 |
Link to this message
|
Another thing to check on:
Quote:
Last address to be written: 2286111 (508:01.36, 4465MB)
This is pushing it. You may want to reduce that backup target.It's very easy and it can prevent a lot of issues.
Open up dvd shrink
Edit
Preferences
Target dvd size, click on dvd-5/scroll till custom
Enter 4360 to the right side of custom
OK.
That will be your future burn target until you change it again.
A regular dvd will tell you it is 4.7 gigs,but through all the conversions,it is only about 4.38 gbs.
By reducing your backup target to 4.36 gbs,you'll keep the burn from reaching the outer edge.Media quality can contribute to problems on that outer edge with uneven dye.
Optodisc is not one of the better manufacturers.You may want to take the backup target to 4300 mbs.
Memorex +rw's also not that great,but at least you can erase them and practice on them.
Poor media can cause many issues. Throwing out your dma is one of them.
Check into the latest firmware update for your burner.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
sweetld
Newbie
|
15. August 2005 @ 21:33 |
Link to this message
|
Hi, well I have:
Updated to Shrink. 3.2
Updated Nero to 6.6.0.16
Run the Drive Cleaner and Registry Checker from Nero (Did remove a driver, but the Registry Checker didn't seem to do anything)
Followed the guide to try to turn on DMA
Swapped by DVD Burner and DVD ROM round, the Burner is now the Master (and DMA now appears to be on !)
And I used Shrink to write the VOB file to my hard drive so I can mess around with trying to burn the DVD.
Changed Shrink's target dvd size to 4360.
I have not yet bought any different DVD Media, but I will do going forward (especially if I can't get these to work)
Things seem better as at least it now recognises the Memorex DVD+RW, and has asked me to format the disk before I use it....
Well we shall see what happens !
BTW I noticed in DVD Decrypter that I was using the Windows drivers, and not the ASPI drivers ? Not sure I totally understand this, is this correct ? Or could this be causing problems for me too ?
Well keep you posted on burn success (or failure)
Thanks for all the advice so far....
|
|
Advertisement
|
|
|
|
sweetld
Newbie
|
15. August 2005 @ 21:59 |
Link to this message
|
|
Well that was fun ! Went through whole erase disk process, then through whole burn process. It did indeed work successfully for the Memorex DVD+RW, and plays OK on my PC (not on my home DVD Player though, but I guess that's because it cannot read DVD+RW disks)
Still will NOT recognise the Parkard Bell DVD+R disk (which DO read in my home DVD player)
So I guess buying new media is the way to go, and maybe also a new drive, are there any suggestions ?
What depresses me most is that I have several Packard Bell DVD's that I burnt without a problem several months ago....
Thanks for all the help !
This message has been edited since posting. Last time this message was edited on 17. August 2005 @ 02:00
|
|
