|
i was burning just yesterday and today its not possible anymore nero always says illegal disc i am using a hp 200i with the newest firmware even reinstalled aswell but dowsn´t work using dvd verbatim here is my log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 30/01/2005 19:27:34
ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST315323A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 61MB (62540kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.8.2005
Burn DVD Image
22:53:05 #1 Text 0 File Reader.cpp, Line 127
Reader running
22:53:05 #2 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 200j running
22:53:05 #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
22:53:06 #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1496181 (332:29.06, 2922MB)
22:53:06 #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
22:53:06 #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 200j, Media type: DVD+R
22:53:06 #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:53:06 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 1496182 (1496182) = #1496182/332:29.7
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1496182 blocks [HP DVD Writer 200j]
--------------------------------------------------------------
22:53:06 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3064180736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1496182 | lead-out | 1 | 0x41 | 0x00
22:53:06 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
22:53:07 #11 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
22:53:07 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
22:53:07 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3.324 KB/s)
22:53:07 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22:53:07 #15 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09D20600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
22:53:07 #16 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
22:53:07 #17 Text 0 File DVDR.cpp, Line 5896
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
22:53:07 #18 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM
22:53:07 #19 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
22:53:33 #20 SCSI -1046 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09890000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
22:53:33 #21 CDR -1046 File Writer.cpp, Line 311
Illegal disc
22:53:33 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:53:33 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
22:53:33 #24 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
22:53:33 #25 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
22:53:33 #26 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
22:53:33 #27 Text 0 File DVDR.cpp, Line 5896
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
22:53:33 #28 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
22:53:33 #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
22:53:33 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3.324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 30/01/2005 19:27:34
File 'Drivers\PXHELP20.SYS': Ver=2.02.27b, size=16000 bytes, created 25/08/2001 2:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
