|
|
|
loading blank media
|
|
|
idied2day
Suspended due to non-functional email address
|
7. September 2005 @ 20:10 |
Link to this message
|
|
can any one help me on why all of a sudden my dvdrw lite-on just started not ready media inless i give it like 2 min or something it use to be like 5 sec now i have to just set and wait ?
|
|
Advertisement
|
 |
|
|
Moderator
|
7. September 2005 @ 20:20 |
Link to this message
|
|
|
|
idied2day
Suspended due to non-functional email address
|
7. September 2005 @ 23:33 |
Link to this message
|
|
i am in dma and i am up to date one my fimeware and i close everything i can even all the programs in the little right hand corner so ?????? i dont know
|
Moderator
|
8. September 2005 @ 03:36 |
Link to this message
|
@idied2day - i wish you'd follow up all the threads you keep opening, ya know ?? :)
you had a shedload of help here (and quite a few other threads too) - http://forums.afterdawn.com/thread_view.cfm/226216
i'll paste what i pasted in a few of the other threads Quote:
@idied2day - pls report back with progress as i've just stumbled on at least 3 new threads that are all similar to this one. it's very confusing to help you when you don't reply back and instead keep opening new threads...
...as per all the other replies from myself, i'm not giving you a hard time, but it's become very tricky to help you as you keep opening threads all over the shop instead of replying to your existing threads...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
idied2day
Suspended due to non-functional email address
|
8. September 2005 @ 06:39 |
Link to this message
|
|
this is not the same problem nothing would work then i have everything working now this is just simply a media loading problem not even close to what that was and i never follow up as you say because when i get the answer to my problem what else am i supposed to do ? but this is a small problem i just thought maybe something was wrong
|
Moderator
|
8. September 2005 @ 06:47 |
Link to this message
|
|
This is my point you see, I'm now gonna ask for you latest section of logfile so we can pinpoint the problem(s) again. I don't mind but if you'd follow up a previous post with a log we'd get you sorted much quicker as we'd know if any settings were missed for instance....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
idied2day
Suspended due to non-functional email address
|
8. September 2005 @ 07:42 |
Link to this message
|
|
ok
|
Moderator
|
8. September 2005 @ 09:19 |
Link to this message
|
i forgot to say where the log lives (can't remember if you know where it is, so pls post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
idied2day
Suspended due to non-functional email address
|
8. September 2005 @ 09:41 |
Link to this message
|
i am having problems with media loading it all that i have checked is fine my firmware is up to date i am in dma mode i even reinstalled like 3 days ago i close everything possible but still haveing problems loading and now i keep getting this error Nero says it is because the disc is dirty but it is brand new which is kind of weird so if you can help let me know
|
|
idied2day
Suspended due to non-functional email address
|
8. September 2005 @ 09:41 |
Link to this message
|
i dont have or cant find Nero history i even did a search on my computer for the file name but nothing it is crazy
|
Moderator
|
8. September 2005 @ 16:27 |
Link to this message
|
idied2day
Did you look under program files? Do you have a folder for Ahead?
Even if you click no to saving a log - Nero still puts it the ahead>nero folder.
Creaky is right - stay w/ one thread. It's so much easier to help! You probably could have had this problem sorted out by now. Posting a new thread w/ limited info just puts us starting a asking the basics.
|
|
idied2day
Suspended due to non-functional email address
|
8. September 2005 @ 20:58 |
Link to this message
|
i dont have that file so i used Alcohol 120% and it said something about meromery buffer not enough space or something if this helps
|
|
idied2day
Suspended due to non-functional email address
|
8. September 2005 @ 21:39 |
Link to this message
|
sorry i finally found what i think you are looking for but this is long but maybe it will tell you something thanks
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 7/13/2003 2:49:42 AM
Nero API version: 6.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 89MB (91772kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
2:00:43 AM #1 Phase 112 File APIProgress.cpp, Line 232
DVD-Video files reallocation started
2:00:43 AM #2 Phase 114 File APIProgress.cpp, Line 232
DVD-Video files reallocation completed (no file modified)
2:00:43 AM #3 Phase 111 File APIProgress.cpp, Line 232
DVD-Video files sorted
2:00:44 AM #4 Text 0 File Reader.cpp, Line 118
Reader running
2:00:44 AM #5 Text 0 File Writer.cpp, Line 127
Writer LITE-ON DVDRW SOHW-1633S running
2:00:44 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
2:00:44 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
2:00:44 AM #8 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-At-Once, using DVD media
2:00:44 AM #9 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2286223 (508:02.73)
2:00:44 AM #10 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
2:00:45 AM #11 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
2:00:45 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286224 (2286224) = #2286224/508:2.74
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286224 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
2:00:45 AM #13 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info
=======================
Burning to LITE-ON DVDRW SOHW-1633S on a DVD-R media
2:00:45 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder LITE-ON DVDRW SOHW-1633S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387526656
2:00:46 AM #15 Phase 24 File APIProgress.cpp, Line 232
Caching of files started
2:00:46 AM #16 Phase 25 File APIProgress.cpp, Line 232
Caching of files completed
2:00:46 AM #17 Phase 36 File APIProgress.cpp, Line 232
Burn process started at 4x (5,520 KB/s)
2:00:46 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
2:00:46 AM #19 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode
2:00:46 AM #20 Text 0 File Mmc.cpp, Line 18119
Set BUFE: SMART-BURN -> ON , Generic write control : ON
2:00:46 AM #21 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: Yes
2:00:46 AM #22 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
30 01 02 04 06 00 00 00 - 08 00 00 00 00 00 00 00 0...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:01:10 AM #23 Text 0 File Writer.cpp, Line 318
02:01:10.703 - LITE-ON DVDRW SOHW-1633S : Queue again later (Intervall : 11msec)
2:15:33 AM #24 Text 0 File WriterStatus.cpp, Line 112
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286224 (22E290h), lenght 0 blocks
2:15:33 AM #25 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
2:16:06 AM #26 SCSI -1194 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04
2:16:06 AM #27 CDR -1194 File ThreadedTransferInterface.cpp, Line 1594
PMA update failure
2:16:06 AM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1594
Could not perform end of Disc-at-once
2:16:07 AM #29 Phase 38 File APIProgress.cpp, Line 232
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
02:00:44 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 7/13/2003 2:49:42 AM
Nero API version: 6.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 93MB (95872kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
3:53:00 AM #1 Phase 112 File APIProgress.cpp, Line 232
DVD-Video files reallocation started
3:53:00 AM #2 Phase 114 File APIProgress.cpp, Line 232
DVD-Video files reallocation completed (no file modified)
3:53:00 AM #3 Phase 111 File APIProgress.cpp, Line 232
DVD-Video files sorted
3:53:01 AM #4 Text 0 File Reader.cpp, Line 118
Reader running
3:53:01 AM #5 Text 0 File Writer.cpp, Line 127
Writer LITE-ON DVDRW SOHW-1633S running
3:53:01 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
3:53:01 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
3:53:01 AM #8 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-At-Once, using DVD media
3:53:01 AM #9 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286127 (508:01.52)
3:53:01 AM #10 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
3:53:01 AM #11 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
3:53:01 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
3:53:01 AM #13 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info
=======================
Burning to LITE-ON DVDRW SOHW-1633S on a DVD-R media
3:53:01 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder LITE-ON DVDRW SOHW-1633S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387330048
3:53:02 AM #15 Phase 24 File APIProgress.cpp, Line 232
Caching of files started
3:53:02 AM #16 Phase 25 File APIProgress.cpp, Line 232
Caching of files completed
3:53:02 AM #17 Phase 36 File APIProgress.cpp, Line 232
Burn process started at 4x (5,520 KB/s)
3:53:02 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
3:53:02 AM #19 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode
3:53:02 AM #20 Text 0 File Mmc.cpp, Line 18119
Set BUFE: SMART-BURN -> ON , Generic write control : ON
3:53:02 AM #21 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: Yes
3:53:02 AM #22 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
30 01 02 04 06 00 00 00 - 08 00 00 00 00 00 00 00 0...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:53:24 AM #23 Text 0 File Writer.cpp, Line 318
03:53:24.109 - LITE-ON DVDRW SOHW-1633S : Queue again later (Intervall : 11msec)
4:07:37 AM #24 Text 0 File WriterStatus.cpp, Line 112
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks
4:07:37 AM #25 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
4:08:03 AM #26 Phase 37 File APIProgress.cpp, Line 232
Burn process completed successfully at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
03:53:00 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
SAMSUNG CD-ROM SC-148A F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 105MB (107924kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
10:59:38 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
10:59:38 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
10:59:38 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:59:38 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
10:59:38 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:59:38 AM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
10:59:38 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
10:59:38 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
10:59:38 AM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
10:59:38 AM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2037801 (452:50.51, 3980MB)
10:59:38 AM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
10:59:38 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:59:38 AM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:59:38 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2037952 (2037952) = #2037952/452:52.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2037952 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
10:59:39 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4173725696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2037952 | lead-out | 1 | 0x41 | 0x00
10:59:39 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:59:39 AM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
10:59:39 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:59:39 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
10:59:39 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:59:39 AM #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:59:39 AM #22 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
11:12:31 AM #23 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2037952 (1F18C0h), lenght 0 blocks
11:12:31 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:12:55 AM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
11:12:56 AM #26 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:12:56 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
10:59:38 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
SAMSUNG CD-ROM SC-148A F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 118MB (121616kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
11:23:06 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
11:23:06 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
11:23:06 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
11:23:06 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
11:23:06 AM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
11:23:06 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:23:06 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:23:06 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:23:06 AM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
11:23:07 AM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2037801 (452:50.51, 3980MB)
11:23:07 AM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
11:23:07 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
11:23:07 AM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:23:07 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2037952 (2037952) = #2037952/452:52.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2037952 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
11:23:07 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4173725696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2037952 | lead-out | 1 | 0x41 | 0x00
11:23:07 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
11:23:07 AM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
11:23:07 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
11:23:07 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
11:23:07 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:23:07 AM #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode
11:23:07 AM #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
11:23:07 AM #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes
11:23:07 AM #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:23:29 AM #25 Text 0 File Cdrdrv.cpp, Line 1282
11:23:29.937 - LITE-ON DVDRW SOHW-1633S\H3 T0 : Queue again later
11:36:13 AM #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2037952 (1F18C0h), lenght 0 blocks
11:36:13 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:36:13 AM #28 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 2037951
11:36:46 AM #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
11:36:47 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:36:47 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
11:23:06 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
SAMSUNG CD-ROM SC-148A F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 107MB (110260kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
11:46:52 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
11:46:52 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
11:46:52 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
11:46:52 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
11:46:52 AM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
11:46:52 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:46:52 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:46:52 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:46:52 AM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
11:46:55 AM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2171113 (482:28.13, 4240MB)
11:46:55 AM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
11:46:55 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
11:46:55 AM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:46:55 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2171264 (2171264) = #2171264/482:30.14
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2171264 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
11:46:55 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 151781376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2171264 | lead-out | 1 | 0x41 | 0x00
11:46:56 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
11:46:56 AM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
11:46:56 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
11:46:56 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
11:46:56 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:46:56 AM #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:46:56 AM #22 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
12:00:36 PM #23 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2171264 (212180h), lenght 0 blocks
12:00:36 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:00:59 PM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
12:01:00 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
12:01:00 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
11:46:52 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
SAMSUNG CD-ROM SC-148A F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 101MB (104284kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
12:08:45 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
12:08:45 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
12:08:45 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
12:08:45 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
12:08:45 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
12:08:45 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:08:45 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:08:45 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:08:45 PM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
12:08:46 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2171113 (482:28.13, 4240MB)
12:08:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
12:08:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
12:08:46 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:08:46 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2171264 (2171264) = #2171264/482:30.14
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2171264 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
12:08:46 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 151781376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2171264 | lead-out | 1 | 0x41 | 0x00
12:08:46 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:08:46 PM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
12:08:46 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:08:46 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
12:08:46 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:08:46 PM #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode
12:08:46 PM #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
12:08:46 PM #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes
12:08:46 PM #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:09:08 PM #25 Text 0 File Cdrdrv.cpp, Line 1282
12:09:08.187 - LITE-ON DVDRW SOHW-1633S\H3 T0 : Queue again later
12:22:42 PM #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2171264 (212180h), lenght 0 blocks
12:22:42 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:22:42 PM #28 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 2171263
12:23:06 PM #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
12:23:07 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
12:23:07 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
12:08:45 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
SAMSUNG CD-ROM SC-148A F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 104MB (106716kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
12:56:15 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
12:56:15 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
12:56:15 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
12:56:15 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
12:56:15 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
12:56:15 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:56:15 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:56:16 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:56:16 PM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
12:56:19 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285977 (507:59.52, 4464MB)
12:56:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
12:56:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:56:19 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:56:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
12:56:19 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 387022848, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
12:56:19 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:56:19 PM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
12:56:19 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:56:19 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
12:56:19 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:56:19 PM #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:56:19 PM #22 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
1:10:42 PM #23 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks
1:10:42 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:11:05 PM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
1:11:06 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
1:11:06 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
12:56:15 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
SAMSUNG CD-ROM SC-148A F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 101MB (103760kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
1:43:42 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
1:43:42 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
1:43:42 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
1:43:42 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
1:43:42 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
1:43:42 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
1:43:42 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
1:43:43 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
1:43:43 PM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
1:43:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285977 (507:59.52, 4464MB)
1:43:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
1:43:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
1:43:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:43:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
1:43:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 387022848, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
1:43:43 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
1:43:43 PM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
1:43:43 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
1:43:43 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
1:43:43 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:43:43 PM #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode
1:43:43 PM #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
1:43:43 PM #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes
1:43:43 PM #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:44:05 PM #25 Text 0 File Cdrdrv.cpp, Line 1282
13:44:05.093 - LITE-ON DVDRW SOHW-1633S\H3 T0 : Queue again later
1:58:18 PM #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks
1:58:18 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:58:18 PM #28 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 2286127
1:58:44 PM #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
1:58:45 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
1:58:45 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
13:43:42 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
SAMSUNG CD-ROM SC-148A F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 92MB (95028kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
2:09:56 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:09:56 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:09:56 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:09:56 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
2:09:56 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
2:09:56 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:09:56 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:09:56 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:09:56 PM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
2:09:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1952681 (433:55.56, 3813MB)
2:09:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
2:09:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
2:09:57 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:09:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1952832 (1952832) = #1952832/433:57.57
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1952832 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
2:09:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3999399936, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1952832 | lead-out | 1 | 0x41 | 0x00
2:09:57 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:09:57 PM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
2:09:57 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:09:57 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
2:09:57 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:09:57 PM #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode
2:09:57 PM #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
2:09:57 PM #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes
2:09:57 PM #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:10:19 PM #25 Text 0 File Cdrdrv.cpp, Line 1282
14:10:19.031 - LITE-ON DVDRW SOHW-1633S\H3 T0 : Queue again later
2:22:32 PM #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 1952832 (1DCC40h), lenght 0 blocks
2:22:32 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:22:32 PM #28 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 1952831
2:23:08 PM #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
2:23:09 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:23:09 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
14:09:56 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/28/2005 10:14:26 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 3 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
SAMSUNG CD-ROM SC-148A F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 100MB (103332kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
NeroAPI
3:19:07 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
3:19:07 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
3:19:07 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
3:19:07 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
3:19:07 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
3:19:07 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:19:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
3:19:07 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
3:19:07 PM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
3:19:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285961 (507:59.36, 4464MB)
3:19:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
3:19:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
3:19:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:19:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
3:19:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 386990080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
3:19:11 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
3:19:11 PM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
3:19:11 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
3:19:11 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
3:19:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:19:11 PM #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
3:19:11 PM #22 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
3:33:33 PM #23 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
3:33:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:33:57 PM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
3:33:58 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:33:58 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/28/2005 10:14:26 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/21/2004 9:37:35 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[02.09.2005]------------------------------------
15:19:07 Robot error messages from:
====== *** NeroAPI, History File *** ======
|
|
MovieDud
Suspended due to non-functional email address
|
8. September 2005 @ 21:50 |
Link to this message
|
Update Nero to latest version. Just one step I noticed that hadn't taken place.
MovieDud
|
Moderator
|
8. September 2005 @ 22:44 |
Link to this message
|
you have more than one log section here, no worries, just for info, this is what separates the sections - Quote:
====== *** NeroAPI, History File *** ======
Quote:
Nero API version: 6.6.0.3
- Nero's too old, update to latest, 6.6.0.16, here - 'Update-Package 1
' - " http://www.nero.com/en/nero-up.php "
Quote:
Physical memory : 383MB (392688kB)
Free physical memory: 100MB (103332kB)
Memory in use : 73 %
here's one of your problems. you are running too low re free memory, make sure to close down more programs prior to any burning
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285961 (507:59.36, 4464MB)
you're burning too close to edge of discs. In DVD Shrink's preferences, set target size to 4300MB, thus avoiding outer edge of discs and not sacrificing much space
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 8. September 2005 @ 22:44
|
|
MovieDud
Suspended due to non-functional email address
|
9. September 2005 @ 14:32 |
Link to this message
|
|
@creaky, you are awe-some. Thanks for all your knowledge. Have a great weekend my friend.
MovieDud
|
Moderator
|
9. September 2005 @ 14:56 |
Link to this message
|
|
Why thank you kind sir and have a good 'un yourself. And hopefully idied2day will be sorted soon..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
idied2day
Suspended due to non-functional email address
|
9. September 2005 @ 23:41 |
Link to this message
|
|
i have got the update and will go 4300 but i close everything i have on the computer before starting burning so i dont understand that ? but this helps alot thanks to you both
|
Moderator
|
10. September 2005 @ 01:00 |
Link to this message
|
|
we'll have to see what's using up your memory next then i guess...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
idied2day
Suspended due to non-functional email address
|
10. September 2005 @ 06:35 |
Link to this message
|
|
how would we do that
|
Moderator
|
10. September 2005 @ 06:51 |
Link to this message
|
idied2day
You can find this info in task manager - ctrl>alt>delete (at the same time). Click on the processes tab. Get a screen shot or 2 and host on a site like these 2 to put in your reply:
http://www.imageweb.info/
http://www.imageshack.us/
When you reply - the info on how to post a pic is there.
|
|
idied2day
Suspended due to non-functional email address
|
10. September 2005 @ 12:16 |
Link to this message
|
|
i did all that i had to and it all is good the disc loads fast as ever and burns about the same useing shrink to compress smaller than i use to so i did not go to the edge and it all works i thank you all for your help :)!!!!!!!!!!!!
|
Moderator
|
10. September 2005 @ 12:21 |
Link to this message
|
|
wow, nice one. happy burning
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
10. September 2005 @ 12:31 |
Link to this message
|
|
@idied2day
Yea!!
@creaky
You sorted another one out:)
|
|
Advertisement
|
|
|
Moderator
|
10. September 2005 @ 12:35 |
Link to this message
|
|
naw, 'twas a combined effort :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
