|
when u first get ur box back u will have the chip installed and the lcd, usb, etc....wow
great. anways u will first want to flash the chip with a bios that can be found on the Xbins
server. I'm not going to go through how to do that because there are loads of tutorials all
over this forum. Anyways if u check out the teamxecuter.com site they will say the most
recent bios i belive it is 3294?? but double check. alright then I should also mention that
this mod is pretty much worthless unless u can get the xbox hooked up to ur network and
be able to use the file transfer protocol cleint over ur network (in noob terms FTP over ur
network) Actually now that I think about it there are other ways but try doing the HTTP
first and if u can't we will go the CD rout. So once u have ur box hooked up to ur network
and u don't have a strict firewall there are a number of ways u can flash the chip I suggest
the Http flashing method. In other words bring internet explorer, safari, firefox, etc. and
type in the following standard IP adress into the site adress bar: 192.168.0.3. It will bring
up a screen about the xecuter 3 and flashing it, But DON'T touch anything yet. Now that
u are logged on u must first turn off the flash protect (the big switch on ur pro switch) it
will turn red. Then while looking at the cromwell bios on screen (make sure u booted ur
box with chip on) u will see a optioon for flash chip. U want to navigate to the flash Via
HTTP sceen and it will either give u an ip adrees to put it or just put in the one mentioned
above. Alright next want to select the 1MB bank for flashing and in order to do this u
must press the 1=on 2=on 3=off 4=off....so basically bush the 1 and 2 buttons and leave
the 3 and 4 alone. This insure that u will flash to the 1MB Bank. Now say for instance I am
wrong and there is another BIOS out and u do get it find out the file size and then tell me
what size it is and I will tell u which switches to press. Now lets just assume that it is
3294 so get set up to the flash by HTTP screen and u have the banks selected, and flash
protect is off, and u are logged onto the propper IP in ur HTTP browser and u see a lik for
upload....first u must find the 3294.bin file I belive me or ?????.bin should be recognizable
after all u got it off xbins. Anyways navigate and select that file and then press upload...it
won't take long and after it says complete it will power off and if it doesn't power it off
then back on again and if done correctly u should have booted to a dash that is new. Now
once at this dash u must first go to X3 then customize x3 bios then disable Autostart x3
config live. Now when ever u boot up the box it will bring u to this screen.
Alright I would suggest u do this first and then we can talk about other stuff later If u
have any questions on this post again.
Xbox: V1.0, Thompson DVD-Rom Drive, 10 GB HD
Dash Board: Unleash X
Other Mods: LCD screen, 2 USB Ports, Pro Switch
APPS: Xbox Media Center
http://gamer-shack.com <-- **All Your Support Needs**
 This message has been edited since posting. Last time this message was edited on 20. September 2005 @ 18:22
|
