|
|
|
DVD Shrink/Nero burning failure
|
|
|
BigD016
Suspended due to non-functional email address
|
27. September 2005 @ 16:04 |
Link to this message
|
|
I'm hoping someone out there will be able to help here! DVD Shrink/Nero will not burn successfully any more. I have been able to burn in the past, but all of a sudden everything is failing. I have a LG GSA-4163B burner to which I have just updated the firmware to the latest version. I had iTunes installed and I thought that was causing the problem. I have uninstalled it but still not having any luck. When I uninstalled iTunes and rebooted I got the following message box called NeroCheck:
The lowerfilter or upperfilter registry key for CD-Rom was containing incorrect drivers. It has been corrected. You must reboot your computer in order the changes are effective. Until then, you may not be able to access your CD-Rom drives. I reboot and the message goes away. I still can't burn though. I'm using Sony DVD-R media and have burned at least 30 times successfully before. Please help!!
|
|
Advertisement
|
|
|
|
|
BigD016
Suspended due to non-functional email address
|
27. September 2005 @ 16:06 |
Link to this message
|
Hi Thought I'd post the error test I got from Nero after the burn failed:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 3 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 3 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522984kB)
Free physical memory: 219MB (225232kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.9.2005
NeroAPI
6:10:42 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
6:10:49 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
6:10:49 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
6:10:49 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
6:10:49 PM #5 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
6:10:49 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:10:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
6:10:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
6:10:49 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
6:10:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286095 (508:01.20, 4465MB)
6:10:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO
6:10:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: ???? - D1
Disc Application Code: 64, Disc Physical Code: 193
6:10:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:10:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
6:10:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00
6:10:50 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
6:10:50 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
6:10:50 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
6:10:50 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
6:10:50 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:10:50 PM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode for Multisession
6:10:50 PM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
6:10:50 PM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: No
6:10:50 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:10:50 PM #25 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
6:11:12 PM #26 SCSI -1061 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x016E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x2A 0x00 0x00 0x00 0x1F 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x24 0x00 0x0C 0x44 0x86
6:11:12 PM #27 CDR -1061 File Writer.cpp, Line 311
Internal target failure
6:11:12 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:11:12 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:11:12 PM #30 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 7999
6:11:12 PM #31 Phase 133 File APIProgress.cpp, Line 276
Writing short lead-out
6:12:39 PM #32 SCSI -1093 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x37 0x20 0x00 0x0C 0x02 0x00
6:12:39 PM #33 SCSI -1176 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x5B 0x01 0x00 0x0C 0x72 0x04
6:12:39 PM #34 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD+R
Book Type setting not supported for the loaded disc type
6:12:39 PM #35 CDR -1061 File WriterStatus.cpp, Line 167
Internal target failure
HL-DT-ST DVDRAM GSA-4163B\H3 T0
6:12:39 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
6:12:39 PM #37 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
6:12:39 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
6:12:39 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Car.Mike
AfterDawn Addict
|
27. September 2005 @ 16:30 |
Link to this message
|
|
BigD816,
Welcome to the forum:
error 1: Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 3 ID 1 DMA: Off
They should all be in DMA Mode. Go into Device Manager and uninstall the DVD-Rom drive ( right click ) and re-boot and let Windows re-install properly. This is not that critical of an error
error 2:Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286095 (508:01.20, 4465MB)
You are burning too close to the outer rim. Set target size to custom 4300
error 3:
Disc Manufacturer: ???? - D1
Disc Application Code: 64, Disc Physical Code: 193
I do not think it recog the blank media
error4: SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x016E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR) Check all of the cables to make sure they are seated properly
error5:
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Does not like that brand of blank media. Try using Verbatim ot Taiyo Yuden
error6:
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Looks like you are trying to booktype a (-) DVD and it can not be done. Uncheck the booktype change
This message has been edited since posting. Last time this message was edited on 27. September 2005 @ 16:33
|
|
BigD016
Suspended due to non-functional email address
|
28. September 2005 @ 10:03 |
Link to this message
|
|
Hi,
I've uninstalled the DVD_Rom drive as directed but it is still saying DMA is off. Is this a big deal?
error 2:Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286095 (508:01.20, 4465MB)
You are burning too close to the outer rim. Set target size to custom 4300
--Can you tell me where & how to do this?
error6:
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Looks like you are trying to booktype a (-) DVD and it can not be done. Uncheck the booktype change
-- Again, can you tell me where and how to do this?
Thanks for your help!!
|
|
konfused1
Member
|
28. September 2005 @ 14:06 |
Link to this message
|
@BigD016:
Just to add:
Quote:
Physical memory : 510MB (522984kB)
Free physical memory: 219MB (225232kB)
Memory in use : 56 %
You don't have enough memory, close all proggies in the background or add more.
|
|
Car.Mike
AfterDawn Addict
|
28. September 2005 @ 14:07 |
Link to this message
|
|
BigD016,
I am not that worried about you DVD-Rom not being in DMA as it will still read the disk and we are not writing to it. Hopefully the instructions below will help. If you get lost that is OK come on back and we will be happy to assist you
1. Change target size:
In Shrink go to Edit> Preferences> Target DVD size> blue box - if you click on it you will see the word Custom. Make sure that is in the box. Now to the right of that change the number to 4300.
2.BookType:
In Shrink Backup> Burn setting> down at the bottom make sure there is not a check mark there
|
|
BigD016
Suspended due to non-functional email address
|
28. September 2005 @ 18:17 |
Link to this message
|
Hello again,
I tried what was suggested below and have uninstalled/reinstalled Nero and still no luck. Bought some different media (Fuji DVD-RW) to try (Werbatim was not available). I did manage to get a little bit farther this time though. It actually started to burn the movie to the DVD, but stopped after a couple minutes. I tried to close some processes in antoher attempt before this with no luck either. Considerig I have burned 25-30 times successfully before,would memory be an issue all of a sudden? I am including the log below. I noticed that the hardware message is still in the log. Do I need to get another cable, or could my burner be done in? Thaks for all the help!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM
Nero API version: 6.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 3 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 3 ID 1 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (522984kB)
Free physical memory: 221MB (226540kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.9.2005
NeroAPI
9:39:32 PM #1 Phase 112 File APIProgress.cpp, Line 232
DVD-Video files reallocation started
9:39:33 PM #2 Phase 114 File APIProgress.cpp, Line 232
DVD-Video files reallocation completed (no file modified)
9:39:33 PM #3 Phase 111 File APIProgress.cpp, Line 232
DVD-Video files sorted
9:39:34 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
9:39:34 PM #5 Text 0 File Writer.cpp, Line 127
Writer HL-DT-ST DVDRAM GSA-4163B running
9:39:34 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
9:39:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
9:39:34 PM #8 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-At-Once, using DVD media
9:39:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2202143 (489:21.68)
9:39:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
9:39:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
9:39:36 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
9:39:36 PM #13 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info
=======================
Burning to HL-DT-ST DVDRAM GSA-4163B on a DVD-R/RW media
9:39:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder HL-DT-ST DVDRAM GSA-4163B for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 215330816
9:39:36 PM #15 Phase 24 File APIProgress.cpp, Line 232
Caching of files started
9:39:36 PM #16 Phase 25 File APIProgress.cpp, Line 232
Caching of files completed
9:39:36 PM #17 Phase 36 File APIProgress.cpp, Line 232
Burn process started at 2x (2,760 KB/s)
9:39:37 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
9:39:37 PM #19 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode
9:39:37 PM #20 Text 0 File Mmc.cpp, Line 18119
Set BUFE: supported -> ON
9:39:37 PM #21 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: No
9:39:37 PM #22 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:40:02 PM #23 Text 0 File Writer.cpp, Line 318
21:40:02.500 - HL-DT-ST DVDRAM GSA-4163B : Queue again later (Intervall : 23msec)
9:42:43 PM #24 SCSI -1093 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x015C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0x2E 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x37 0x20 0x00 0x0D 0x02 0x00
9:42:43 PM #25 CDR -1093 File Writer.cpp, Line 335
No seek complete
9:42:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
9:42:43 PM #27 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader
9:42:45 PM #28 Phase 38 File APIProgress.cpp, Line 232
Burn process failed at 2x (2,760 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Car.Mike
AfterDawn Addict
|
28. September 2005 @ 18:29 |
Link to this message
|
BigD016,
It is still showing Medium problem I have done movies w/ 256 ram( a long time ago) back when you just had the "Big 3" to use. 256 is the bare minimum you need and you have 512. I am going to PM Creaky and see if he can look at this and advise you on what to do. Nero Log's are his specialty. LOL
|
|
Car.Mike
AfterDawn Addict
|
28. September 2005 @ 18:35 |
Link to this message
|
|
Tried to PM Creaky but I am getting Server could be down error
|
Moderator
|
28. September 2005 @ 22:48 |
Link to this message
|
alo-ha, i thought it was just me, i tried a few times to send a PM a while ago and got the same error. oh hang on i just saw your previous reply so i know what you were gonna PM me for, i'll have a look at the log, i subscribed to this one about 3am i think, i couldn't sleep. i feel drunk i'm so tired today. ok, logfile going into notepad :)
i haven't read thru whole thread yet but have attacked the last logfile....
Quote:
Nero API version: 6.0.0.0
- that version is out of the Old Testament, update to 6.6.0.16, ie the latest
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
- a-ha, your burner wasn't around in biblical times, so Nero can't properly recognise your burner :). update Nero.
Quote:
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 3 ID 1 DMA: Off
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 510MB (522984kB)
Free physical memory: 221MB (226540kB)
Memory in use : 56 %
- 512MB is sufficient, provided programs are closed down prior to any burning. i have 1GB now and always have 600MB free, but if i left loads of stuff running i would also run low on free memory
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
No seek complete
- follow ALL suggestions and if nothing works, try different media (again). also try a defrag, it always helps
Quote:
Burn process failed at 2x (2,760 KB/s)
- splat!
Quote:
Existing drivers:
- your atapi drivers are missing from this section, so they're not loaded correctly. this should be sorted by the DMA fix further up the reply..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 28. September 2005 @ 23:01
|
|
BigD016
Suspended due to non-functional email address
|
30. September 2005 @ 20:21 |
Link to this message
|
Hello again!
Well, I've updated Nero, bought some Verbatim DVD+R, got DMA turned on for my DVD-ROM drive, defraged and I'm still getting nowhere. I did notice that just before Shrink/Nero errored, it said something like "Focus or tracking error" and then stopped. I noticed the ATAPI drivers you said that should show up with the DMA fix didn't. Could this be part of the problem? If so, how can I load them? I'm worried it is my burner gone kaput! Here is my latest log...Thanks for your help...BigD
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522984kB)
Free physical memory: 227MB (232880kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.9.2005
NeroAPI
11:55:39 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
11:55:40 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
11:55:40 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
11:55:40 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
11:55:40 PM #5 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
11:55:40 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:55:40 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:55:41 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:55:41 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:57:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202159 (489:22.09, 4301MB)
11:57:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
11:57:09 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
11:57:09 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not empty. Insert empty disc.
(Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R DL.)
11:57:09 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
11:57:09 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202160 | lead-out | 1 | 0x41 | 0x00
11:57:09 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
11:57:10 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
11:57:10 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
11:57:10 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
11:57:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:57:10 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:57:10 PM #22 Text 0 File DVDR.cpp, Line 5135
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:57:10 PM #23 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM
11:57:10 PM #24 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: No
11:57:34 PM #25 SCSI -1039 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x00C50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x06 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x01 0x00 0x0E 0x09 0x01
11:57:34 PM #26 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error
11:57:34 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:57:34 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:57:35 PM #29 SCSI -1039 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x01 0x00 0x0E 0x09 0x01
11:57:36 PM #30 CDR -1039 File WriterStatus.cpp, Line 167
Focus or tracking error
HL-DT-ST DVDRAM GSA-4163B\H3 T0
11:57:36 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
11:57:36 PM #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
11:57:36 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:57:36 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
katrinaa
Suspended due to non-functional email address
|
1. October 2005 @ 01:58 |
Link to this message
|
|
i seem to be having the same problem
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:04
Nero API version: 6.3.0.5
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVD-RW GWA-4040B>Version: A112 - HA 1 TA 0 - 6.3.0.5
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4040 E: CDRom0
HL-DT-ST DVD-ROM GDR8162 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 117MB (119984kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.10.2005
NeroAPI
10:04:20 #1 Phase 112 File APIProgress.cpp, Line 253
DVD-Video files reallocation started
10:04:20 #2 Phase 114 File APIProgress.cpp, Line 253
DVD-Video files reallocation completed (no file modified)
10:04:21 #3 Phase 111 File APIProgress.cpp, Line 253
DVD-Video files sorted
10:04:22 #4 Text 0 File Reader.cpp, Line 118
Reader running
10:04:22 #5 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVD-RW GWA-4040B running
10:04:22 #6 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
10:04:22 #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
10:04:22 #8 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-At-Once, using DVD media
10:04:23 #9 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286112 (508:01.37, 4465MB)
10:04:23 #10 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
10:04:23 #11 Text 0 File DlgWaitCD.cpp, Line 2100
Recorder: HL-DT-ST DVD-RW GWA-4040B, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
10:04:23 #12 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:04:23 #13 Text 0 File ThreadedTransferInterface.cpp, Line 809
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVD-RW GWA-4040B]
1: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (0) not provided
original disc pos #0 + 1 (1) = #1/0:0.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [HL-DT-ST DVD-RW GWA-4040B]
--------------------------------------------------------------
10:04:24 #14 Text 0 File ThreadedTransferInterface.cpp, Line 978
Prepare recorder [HL-DT-ST DVD-RW GWA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 4681957376 4681957376 4681959424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | 2 | 0 | 0x00 | 0x41
2286112 | 2 | 1 | 0x00 | 0x41
2286113 | lead-out | 1 | 0x00 | 0x41
10:04:25 #15 Phase 24 File APIProgress.cpp, Line 253
Caching of files started
10:04:25 #16 Text 0 File Burncd.cpp, Line 4084
Cache writing successful.
10:04:25 #17 Phase 25 File APIProgress.cpp, Line 253
Caching of files completed
10:04:26 #18 Phase 36 File APIProgress.cpp, Line 253
Burn process started at 2.4x (3,324 KB/s)
10:04:26 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2294
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:04:26 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2294
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:04:26 #21 Text 0 File Cdrdrv.cpp, Line 7991
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 49 4E 46 4F 44 49 - 53 43 41 31 30 01 39 23 ..INFODISCA10.9#
00 9C 7C 5C 02 28 00 96 - 7E 70 02 28 00 9C 7B 68 ..|\.(..~p.(..{h
02 28 04 04 20 E0 00 F0 - 00 00 00 00 00 00 00 01 .(..............
10:04:26 #22 Phase 98 File APIProgress.cpp, Line 253
Start formatting disc before burning
10:04:56 #23 Phase 100 File APIProgress.cpp, Line 253
Formatting disc was successful
10:04:56 #24 Phase 65 File APIProgress.cpp, Line 253
Burn process started
10:04:57 #25 Text 0 File DVDPlusRW.cpp, Line 567
Start write address at LBA 0
DVD high compatibility mode: Yes
10:09:22 #26 SCSI -1114 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x012E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0xB8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x0F 0x29 0x00
10:09:22 #27 CDR -1114 File Writer.cpp, Line 301
Reset occurred
10:09:22 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:09:22 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
10:09:25 #30 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 02/04/2004 22:32:20
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 27/08/2003 03:02:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
really haven't got a clue what to do........what is DMA??
regards Kay
This message has been edited since posting. Last time this message was edited on 1. October 2005 @ 06:39
|
|
Car.Mike
AfterDawn Addict
|
1. October 2005 @ 04:00 |
Link to this message
|
|
BigD016,
It is still giving this error:
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x00C50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
It is stating it is the Hardware. You might have to return or better replace the DVD burner
That is the only error in this log
|
|
Car.Mike
AfterDawn Addict
|
1. October 2005 @ 04:15 |
Link to this message
|
katrinaa,
Please remove the number ( serial Number) at top of your thread. I begins w/ 1A......
1.Update Nero- You are a few versions behind
2.Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286112 (508:01.37, 4465MB)
Set target size to custom 4300 as you are writting to close to the outer rim
3. SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x012E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Looks like a problem w/ the burner. You might need to call computer manuf. or if you can look inside the case make sure all the cables are firmly seated. Try also cleaning the lens of the burner
DMA: Direct Memory Access transfers data from main memory to a device without going through CPU. If you have DMA enabled the data transfer data is a lot quicker
|
|
katrinaa
Suspended due to non-functional email address
|
1. October 2005 @ 06:52 |
Link to this message
|
Thanks for that Car.Mike..........i have downloaded Nero 6.6.............and will set the target size to 4300....and see what happens then........i did do a disk defragmentation......hoping that it would sort it out.................thanks for all your help.........i'll try it out and get back to you..........regards Kay
|
|
katrinaa
Suspended due to non-functional email address
|
1. October 2005 @ 08:15 |
Link to this message
|
i've done everything you said Car.Mike............still get the following error
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4040B E: CDRom0
HL-DT-ST DVD-ROM GDR8162B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 139MB (142532kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.10.2005
NeroAPI
16:51:19 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
16:51:19 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
16:51:19 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
16:51:22 #4 Text 0 File Reader.cpp, Line 127
Reader running
16:51:22 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
16:51:22 #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD-RW GWA-4040B running
16:51:22 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:51:22 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:51:22 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
16:51:23 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202143 (489:21.68, 4301MB)
16:51:23 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
16:51:23 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD-RW GWA-4040B, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
16:51:23 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:51:23 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [HL-DT-ST DVD-RW GWA-4040B]
--------------------------------------------------------------
16:51:23 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD-RW GWA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202144 | lead-out | 1 | 0x41 | 0x00
16:51:23 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
16:51:23 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
16:51:23 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
16:51:23 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
16:51:23 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:51:23 #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: INFODISC
Media type ID: A10
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39 ...INFODISCA10.9
23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
16:51:24 #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
16:53:31 #23 SCSI -1114 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B760000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0x3D 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x0F 0x29 0x00
16:53:31 #24 CDR -1114 File Writer.cpp, Line 311
Reset occurred
16:53:31 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:53:31 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
16:53:32 #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
16:53:32 #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
16:53:32 #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 02/04/2004 22:32:20
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 27/08/2003 03:02:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
also i have burned many dvd's in the past without any problems,........do you think it's my dvd burner............i am thinking of buying an external one.......can you recommend any................that may solve the problem????
|
|
Car.Mike
AfterDawn Addict
|
1. October 2005 @ 08:45 |
Link to this message
|
Kartinaa,
Yeah you are correct as the error below keeps showing up.
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B760000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
I think the only thing we have not done is take a can of compressed air and blow into the unit . Heck the laser could be off and to repair it would cost more than a new one. If this is an internal unit take it out and let a friend try doing a movie using the unit. Make sure he takes his unit out and make sure that you have the pins in the back properly setup up to master or slave. If it works in his unit the it is something in the cable , Mobo. Could be a solder joint.
If you want and external drive I would go w/ a Plextor or Pioneer as both are excellent drives
Look at the Plextor PX-716UF but I must warn you these drives are not cheap. Most externals are 50% or more higher in price and the internal drives. You can also get refurbed units and you might call Plextor and see if they have any
http://www.plextor.com/english/products/product_dvdrw_drives.html
|
|
katrinaa
Suspended due to non-functional email address
|
1. October 2005 @ 09:27 |
Link to this message
|
Car.Mike.........i was reading about the Amacom DiviD Burner - which retailed at £200 in April 2004....now it costs about £75
http://www.pocket-lint.co.uk/review.php?reviewId=384
tell me what you think.........i will look at your recommendations
thanks again
regards Kay
|
|
Car.Mike
AfterDawn Addict
|
1. October 2005 @ 09:43 |
Link to this message
|
|
katrinaa,
The link you provided did not work as it gave server down error. Looked at Znet's review which was good. The only thing I can see is the burner can not do Dual Layer Disks. The Plextor can. The Plextor is going to be more but it is probably one of the best external's IMHO
|
|
katrinaa
Suspended due to non-functional email address
|
1. October 2005 @ 09:50 |
Link to this message
|
|
Car.Mike......this is probably my last reply on this thread.....the cheapest i found the Plextor PX-716UF was at £158........is that reasonable or can you find it cheaper................thanks again.........regards Kay
|
Moderator
|
1. October 2005 @ 10:25 |
Link to this message
|
|
ps don't forget to try uninstalling Roxio...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Car.Mike
AfterDawn Addict
|
1. October 2005 @ 10:27 |
Link to this message
|
|
Katrinaa,
Using the conversion rate that is about right as It is expensive. If you keep looking then look for one that does Dual Layer burns. You mght also look at the Lite-ons as some members here have good reports on them. Have a good time looking and if you have any problems after you get the burner just start a new thread and list the problems
|
|
Pekchuwi
Newbie
|
14. October 2005 @ 10:58 |
Link to this message
|
I recently bought this same LG GSA-4163B DVD Writer. I'm using
the Nero Express burner software OEM that came with this writer,
so I'm pretty sure this Nero should work fine with this DVD Writer.
I was able to burn several data DVDs before, and recently it
started to fail writing also eventhough I used the same blank
DVD brand. I'm getting this Lead-In failure message and it conks
out in the middle of the burn. I've wasted 5 blank DVDs so far
and I don't know what on earth happened to this writer. It's
working just fine before, and suddenly I start getting this write
failures.
Reading the posts in this thread having the same issue, could this
LG DVD Writer model be a lemon that's why they're selling this
writer this cheap?
|
|
Car.Mike
AfterDawn Addict
|
14. October 2005 @ 12:43 |
Link to this message
|
|
Pekchuwi,
It could be a lemon or it does not like the blank media you are using. Try Verbatim or Taiyo Yuden blank media. You should always be particular about the blank media you use as a lot of the media out there is crap
|
|
Advertisement
|
|
|
|
BigD016
Suspended due to non-functional email address
|
14. October 2005 @ 17:15 |
Link to this message
|
|
First of all thank you to Mike and Creaky for there help with my problems a few weeks ago.
Pekchuwi: I had the same problem. Had the burner for 6 months, working perfectly, then all of a sudden nothing would burn. Took it back to the store I bought it and exchanged it for a new one. Unfortunately I had to get the same burner, so hopefully this one will last longer! I wonder if these burners have a defect that causes them to crap out after a short time?? My media has always been Sony DVDs which I thought were pretty good, but I have now switched to Verbatim...just to be safe. Good luck and try all the solutions suggested by Mike and Creaky, they were really helpful!
|
|
