Materials Needed 1) A xbox controller
2) A soldering iron
3) An Usb extension cord
Procedures
1) First you will take your Usb extension cord and cut it right down the middle.
2) Do you see that red line? Cut on that red line and then strip the wires for the controler and the usb cord.
http://putfile.com/pic.php?pic=9/26611345521.jpg&s=x2
6) Now take the cover off the controller port and the metal cover, beneath the metal cover you should see the wires.
7) With the half of the usb cord u still have, carefully sodder the green wire to the green wire, red to red, black to black, ect. Do nothing with the yellow wire.
8) Burn a whole in the black top of the connecting port so the usb wire can come out.
9) Your finished product should look like this.
http://putfile.com/pic.php?pic=9/26611454532.jpg&s=x2
If you want to use the controler with the xbox again, Connect the two usb ports, and then plug the controller port into your xbox, you xbox won't even know the difference from a regular conotroler. You can now plug usb sticks to your xbox and your controler into your computer. Enjoy!
I edited it so it would work but you should redo the pics as they are blury and a bit big. What you have to do with putfile pics is right click on the image (while viewing it in putfile) and select properties. That will give you the direct url for the pic itself not a go around url.
is the basics of moding a controller.
