|
I keep getting the following message:
Andrew
1A20-030E-0300-1349-1215-9547
1A23-0609-4030-2333-6402-0097
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US01 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ELBY DVD-ROM >Version: 1.0 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <ElbyVCD> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: Off
DiskPeripheral : HITACHI_DK23EA-30 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 2 ID 0 DMA: On
=== CDRom-Device-Map ===
ELBY DVD-ROM F: CDRom1
TOSHIBA DVD-ROM SD-R2312 D: CDRom0
TSSTcorp CD/DVDW TS-H552U E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 702MB (719856kB)
Free physical memory: 324MB (331860kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.10.2005
Burn DVD Image
08:52:06 #1 Text 0 File Reader.cpp, Line 127
Reader running
08:52:06 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
08:52:06 #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
08:52:06 #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2294453 (509:52.53, 4481MB)
08:52:06 #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
08:52:06 #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: TTH01 -
Disc Application Code: 64, Disc Physical Code: 193
08:52:06 #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
08:52:06 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2294454 (2294454) = #2294454/509:52.54
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294454 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
08:52:06 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699041792, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2294454 | lead-out | 1 | 0x41 | 0x00
08:52:06 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
08:52:07 #11 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
08:52:07 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
08:52:07 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
08:52:09 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
08:52:09 #15 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
08:52:09 #16 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
08:52:09 #17 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
08:52:09 #18 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
08:52:31 #19 Text 0 File Cdrdrv.cpp, Line 1286
08:52:31.370 - TSSTcorp CD/DVDW TS-H552U\H3 T0 : Queue again later
08:52:32 #20 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x04C60000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
08:52:36 #21 SCSI -1114 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0A181400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00
08:52:36 #22 CDR -1114 File Writer.cpp, Line 311
Reset occurred
08:52:36 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
08:52:36 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
08:52:36 #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 607
08:52:51 #26 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
08:52:51 #27 CDR -1033 File WriterStatus.cpp, Line 167
Drive not ready
TSSTcorp CD/DVDW TS-H552U\H3 T0
08:52:51 #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
08:52:51 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ElbyVCD.sys': Ver=4, 2, 0, 0, size=22016 bytes, created 28/11/2002 11:43:49 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
@Cymru31
Please re-edit your Nero Serial # that starts with 1A20-XXXX-XXXX-XXXX-XXXX and 1A23-XXXX-XXXX-XXXX-XXXX before someone steal it from you. To Edit your post, click on the little "pencil & paper icon" on the right hand that located on the orange bar, then re-edit out the post and hit save.
Quote:
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: Off
DiskPeripheral : HITACHI_DK23EA-30 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 2 ID 0 DMA: On
One of your driver or dvd-rom drive DMA is off. DMA needs to enable back ON. To enable DMA back on, please follow the below steps to "uninstall" the DMA off driver back to ON.
((( To enable DMA back ON by "uninstalling" it's driver ?for Win XP users? )))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on +sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of IDE ATA/ATAPI Controllers
(B) double left click on either Primary or Secondary IDE Channel (NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the "main aka Primary IDE Channel" already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the next step.
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
NOTE: To verify your dvd burner/dvd-rom drivers with Nero:
Open up "StartSmart", click on "Nero Toolkit", then click on "Nero InfoTool" (InfoTool will run and retrieve all drivers), now click on "Configuration" - this should show you where your DVD Burner/DVD-ROM is installed under either "Primary or Secondary" <--- make good note of that and you're ready to "uninstall" your dvd burner/dvd-rom drivers now.
Quote:
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US01
Your Samsung dvd burner's firmware is old, it needs to update to the current firmware. The current firmware is "US06" - updating firmware is helpful to your burner, it'll help to recognize other media and codes, plus it'll be more compatible with other new media. Go here http://forum.rpc1.org/dl_firmware.php?download_id=2011 and download it to run and update it. NOTE: be sure you don't have any CD or DVD inside your burner when you run the firmware to update your burner.
Quote:
08:52:32 #20 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x04C60000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
Your burner doesn't like the media, and or it doesn't recognize the media code. Again, a firmware needed to be updated.
Quote:
08:52:51 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Try to burn at 4X next time, but no higher than that. I know the TDK DVD-R is good, but may be your burner doesn't like it. Perhaps, you need to try other high quality such as Taiyo Yuden (also the 8X DVD+R Fuji "Made In Japan"), Verbatim (MCC003 & MCC004 only), Maxell 8X DVD+R "Made In Japan", and the Ritek and see if you'll get a successfully burned.
|
