Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Saturday 4.10.2025 / 17:14
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > software specific discussion > dvd shrink forum > error after decryption
Show topics
 
Forums
Forums
Error after decryption
  Jump to:
 
Posted Message
golfnut53
Newbie
_ 		10. November 2005 @ 00:28 _ Link to this message    Send private message to this user   
Since formatting and upgrading to SP2, Shrink decrypts and then when i insert the blank disc, it starts to read the disc. I notice it says its going to burn at 12x speed, and im using a TDK 8x speed disk. I dont know if this is the problem but it will come up with an error. I have reinstalled shrink and updated Nero.. error posted below:

*edited by mika, Finnish moderator*

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 14/08/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27/10/2004 3:35:32 AM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b

Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <siside> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-109 1.40 siside Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-4160BA303 siside Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6Y080L0 YAR4 siside Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 E: CDRom0
HL-DT-ST DVDRAM GSA-4160B D: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 147MB (151516kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.11.2005
NeroAPI
7:49:24 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

7:49:24 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

7:49:24 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

7:49:24 PM #4 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:24 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

7:49:24 PM #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running

7:49:24 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

7:49:24 PM #8 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #9 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #10 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #11 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

7:49:25 PM #12 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

7:49:25 PM #13 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

7:49:25 PM #14 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #15 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #16 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #17 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #18 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #19 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #20 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #21 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #22 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:49:25 PM #23 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07046600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x3A 0x00

7:50:10 PM #24 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2022975 (449:33.00, 3951MB)

7:50:10 PM #25 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

7:50:10 PM #26 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

7:50:10 PM #27 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD-R/RW.)

7:50:10 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2022976 (2022976) = #2022976/449:33.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2022976 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

7:50:10 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4143054848, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 |
[ + quote]

This message has been edited since posting. Last time this message was edited on 10. November 2005 @ 09:35
Advertisement
_ 		__
colw
Senior Member
_ 		10. November 2005 @ 00:51 _ Link to this message    Send private message to this user   
Firstly remove your serial number e.g. 1A20-0231 etc

Secondly you need to enable DMA
_________________________________________________________________
CdRomPeripheral : PIONEER DVD-RW DVR-109 1.40 siside Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-4160BA303 siside Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6Y080L0 YAR4 siside Port 1 ID 0 DMA: Off
_________________________________________________________________

Thirdly you need to use compatible - format media
__________________________________________________________________
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD-R/RW.)
___________________________________________________________________

Fourthly - you need to change your burn speed (too fast for reliable burning
____________________________________________________________________
7:50:10 PM #33 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 12x (16,620 KB/s)
____________________________________________________________________

Thats for starters - others may be able to provide more detailed suggestions.
[ + quote]
zippyd
Senior Member

1 product review
_ 		10. November 2005 @ 02:56 _ Link to this message    Send private message to this user   
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: RITEKG - 05


Make sure that you didn't fingerprint it when you put it in....or it's just possible that you got a bad batch of Ritek discs. The G05's were plagued with issues on their initial release which were supposed to have been resolved, BUT....

Wait.... just realized something... G05 are supposed to be 8x discs...
Burn process failed at 12x
Set your burn speed down to 4X. Maybe exceeding the speed limit caused the failure.
[ + quote]

This message has been edited since posting. Last time this message was edited on 10. November 2005 @ 02:57
9mmruger1
AfterDawn Addict
_ 		10. November 2005 @ 03:04 _ Link to this message    Send private message to this user   
...just passing by and saw this.
Quote:
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD-R/RW.)
You need a firmware update, you are 4 versions behind. Use this link to update: http://forum.rpc1.org/dl_firmware.php?download_id=2017
[ + quote]


For great guides:
http://home.comcast.net/~bbmayo/index.html
mika
Moderator
_ 		10. November 2005 @ 09:35 _ Link to this message    Send private message to this user   
Serial number edited.
[ + quote]
Advertisement
_ 		__
 
_
LOCOENG
Moderator

1 product review
_ 		10. November 2005 @ 11:44 _ Link to this message    Send private message to this user   
In addition to the above mentioned tweaks...
Quote:
Physical memory : 479MB (490992kB)
Free physical memory: 147MB (151516kB)
Memory in use : 69 %
Free up some memory.

Update firmware, slow the burn down, free up memory, make sure the discs are clean and you should be burning in no time.
[ + quote]
afterdawn.com > forums > software specific discussion > dvd shrink forum > error after decryption
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork