|
Here is my nero log if you can please help me. Done this beforw with no problem.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-105 >Version: 1.33 - HA 1 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MDT MD600BB-00BSA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8527B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8525B atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8527B D: CDRom0
PIONEER DVD-RW DVR-105 E: CDRom1
HL-DT-ST CD-ROM GCR-8525 F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 192MB (197204kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.11.2005
CueSheet
11:28:54 AM #1 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated
11:28:54 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
11:28:54 AM #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media
11:29:29 AM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 359155 ( 79:50.55)
11:29:29 AM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
11:29:29 AM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: PIONEER DVD-RW DVR-105;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4C B0, 2: 5C D8 36, 3: FF FF FF (invalid)
11:29:29 AM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
11:29:29 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 300 (300) = #300/0:4.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 300 blocks [PIONEER DVD-RW DVR-105 ]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
26 indices, index0 (150) provided
original disc pos #0 + 14995 + 15818 + 13178 + 14086 + 13020 + 14602 + 14827 + 14530 + 13982 + 15219 + 13780 + 13333 + 13868 + 12797 + 13199 + 14010 + 14381 + 13162 + 14347 + 16245 + 15806 + 15950 + 17087 + 16738 + 9746 (358706) = #358706/79:42.56
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 358706 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------
11:29:29 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [PIONEER DVD-RW DVR-105 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 1051200, ISRC ""
2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 1051200 1401600 839338816, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x61
0 | 1 | 1 | 0x00 | 0x61
300 | 2 | 0 | 0x00 | 0x61
450 | 2 | 1 | 0x00 | 0x61
15445 | 2 | 2 | 0x00 | 0x61
31263 | 2 | 3 | 0x00 | 0x61
44441 | 2 | 4 | 0x00 | 0x61
58527 | 2 | 5 | 0x00 | 0x61
71547 | 2 | 6 | 0x00 | 0x61
86149 | 2 | 7 | 0x00 | 0x61
100976 | 2 | 8 | 0x00 | 0x61
115506 | 2 | 9 | 0x00 | 0x61
129488 | 2 | 10 | 0x00 | 0x61
144707 | 2 | 11 | 0x00 | 0x61
158487 | 2 | 12 | 0x00 | 0x61
171820 | 2 | 13 | 0x00 | 0x61
185688 | 2 | 14 | 0x00 | 0x61
198485 | 2 | 15 | 0x00 | 0x61
211684 | 2 | 16 | 0x00 | 0x61
225694 | 2 | 17 | 0x00 | 0x61
240075 | 2 | 18 | 0x00 | 0x61
253237 | 2 | 19 | 0x00 | 0x61
267584 | 2 | 20 | 0x00 | 0x61
283829 | 2 | 21 | 0x00 | 0x61
299635 | 2 | 22 | 0x00 | 0x61
315585 | 2 | 23 | 0x00 | 0x61
332672 | 2 | 24 | 0x00 | 0x61
349410 | 2 | 25 | 0x00 | 0x61
359156 | lead-out | 1 | 0x00 | 0x41
11:29:29 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started
11:29:29 AM #11 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.
11:29:29 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed
11:29:29 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (600 KB/s)
11:29:29 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:29:29 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450
11:29:29 AM #16 Text 0 File Mmc.cpp, Line 15558
StartDAO : CD-Text - Off
11:29:29 AM #17 Text 0 File Mmc.cpp, Line 20173
Set BUFE: supported -> ON
11:29:29 AM #18 SCSI -1067 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x034B8000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x00
CDB Data: 0x5D 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xF0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x26 0x00
11:29:29 AM #19 Text 0 File Mmc.cpp, Line 15845
CueData, Len=240
41 00 00 24 00 00 00 00
41 01 00 20 00 00 00 00
41 01 01 20 00 00 02 00
41 02 00 20 00 00 06 00
41 02 01 20 00 00 08 00
41 02 02 20 00 03 1b 46
41 02 03 20 00 06 3a 3f
41 02 04 20 00 09 36 29
41 02 05 20 00 0d 02 1b
41 02 06 20 00 0f 37 48
41 02 07 20 00 13 0a 31
41 02 08 20 00 16 1c 1a
41 02 09 20 00 19 2a 06
41 02 0a 20 00 1c 30 26
41 02 0b 20 00 20 0b 20
41 02 0c 20 00 23 0f 0c
41 02 0d 20 00 26 0c 46
41 02 0e 20 00 29 11 3f
41 02 0f 20 00 2c 08 23
41 02 10 20 00 2f 04 22
41 02 11 20 00 32 0b 13
41 02 12 20 00 35 17 00
41 02 13 20 00 38 12 25
41 02 14 20 00 3b 1d 3b
41 02 15 20 00 3f 06 1d
41 02 16 20 00 42 25 0a
41 02 17 20 00 46 09 3c
41 02 18 20 00 49 39 2f
41 02 19 20 00 4d 28 3c
41 aa 01 24 00 4f 32 38
11:29:29 AM #20 CDR -1067 File ThreadedTransferInterface.cpp, Line 1607
Invalid field in parameter
11:29:29 AM #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1607
Could not perform start of Disc-at-once
11:29:29 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK
11:29:29 AM #23 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 4x (600 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.0.0.171 , size=24839 bytes, created 1/13/2003 10:19:26 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
