|
You only Capture DV Video from a DV Camcorder or a Analogue Digital Converter through the 1394 firewire Port with a Standatd Analogue Capture device like the one you have you just Plug it in Normally through the USB port.....
Have you made sure that you have the Drivers properly installed for your Capture device???
Also have you selected your Particular Device in the Capture settings as the Video source??
You also have to select which Input on the Capture device you are useing in the Capture software so if you are Captureing through S-Video you have to select "S-Video" in the device settings or if you are Captureing through the RCA/Composite inputs you have to select "RCA/Composite" in the Capture settings.....
Also the Dazzle DVC80/DVC85/DVC90 USB Capture devices are some of the Worst ones you could Possibly get for Quality....USB doesn"t have enough Bandwidth to efficiently Transfer Uncompressed Full Res Video to your PC through USB so you can expect to get Low Quality captures with frame Drops and Sync problems....
If you have to get a USB device get one that uses Hardware Compression that way the Video signal is Compressed before it is Transfered to your PC so there aren"t Problems with frame Drops and Low quality and Sync problems.....
You can allways Try useing the Capture Software that came with the Device or some other Software and then Just import your Captured File into Studio 9 for editing..You don"t have to capture useing Studio 9.....
Good Luck
P-4 2.6ghz (Overclocked to 3.2ghz)
Abit IS7
1gb Dual Chanell DDR 400mhz
Zalman CNPS7000-CU Cooler(Modded with 50cfm Fan)
XFX Gforce 6600GT 128mb GDDR3 (500/1000)
Pinnacle DV500 ADVC Editing Card
RaidMax Scorpio ATX Case + 5 Led
|
