|
|
|
DVD +R will not record properly on my burner???
|
|
|
bigeasyst
Newbie
|
6. December 2005 @ 18:18 |
Link to this message
|
|
I was using Sony DVD-R 120 min/4.7 GB AccuCore discs and they work fine for burning dvd's. I recently got some Sony DVD+R 120 min/4.7 GB Accucore discs from a friend. When I tried to burn a movie on one, it just kept on going and going in the burner even after it said it was done. Any one have any ideas why this would happen. I have a Sony DVD RW DW-D22A burner if that makes any difference.
|
|
Advertisement
|
|
|
|
|
majrdavid
Suspended due to non-functional email address
|
8. December 2005 @ 12:41 |
Link to this message
|
|
Does your dvd-burner support both + And - formats?
|
|
bigeasyst
Newbie
|
8. December 2005 @ 13:09 |
Link to this message
|
|
yes it does
|
|
majrdavid
Suspended due to non-functional email address
|
8. December 2005 @ 13:21 |
Link to this message
|
|
I had the same problem and found out that my burner had given up the fight,i suggest you use other brand dvd discs it just might be the brand of discs you are using.Other than that i am not too sure what is going on.
|
|
neodave
Member
|
8. December 2005 @ 14:06 |
Link to this message
|
|
Have you updated your firmware?
|
|
bigeasyst
Newbie
|
8. December 2005 @ 14:27 |
Link to this message
|
|
everything is updated. Maybe I just got a bad batch of discs???
|
Moderator
|
11. December 2005 @ 12:40 |
Link to this message
|
|
what software you using to burn ?
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
bigeasyst
Newbie
|
11. December 2005 @ 19:18 |
Link to this message
|
|
Nero 6.6.0.18
|
AfterDawn Addict
|
11. December 2005 @ 19:42 |
Link to this message
|
Let's have the "very last section" from your Nero logs and creaky (our super friendly Moderator) will help to tweak you through (and or I'll volunteer to help too, hehehe). Go here to get your Nero log: C:\Program Files\Ahead\Nero\NeroHistory -- now REMEMBER to EDIT out your Nero serial (something like 1A23XXXXXXXXXXXX) before you're going to post here.
|
|
bigeasyst
Newbie
|
12. December 2005 @ 08:51 |
Link to this message
|
This is the most recent one that I tried at 6X.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'H:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <SONY DVD RW DW-D22A> Version: BYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <IDE-DVD ROM 16x >Version: HD08 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00HEA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IDE-DVD ROM 16x atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D22A G: CDRom0
IDE-DVD ROM 16x D: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047788kB)
Free physical memory: 598MB (612456kB)
Memory in use : 41
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.12.2005
Burn DVD Image
11:05:59 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
11:05:59 PM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D22A running
11:05:59 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:05:59 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202228 (489:23.03, 4301MB)
11:05:59 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:05:59 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D22A, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
11:05:59 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:05:59 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2202229 (2202229) = #2202229/489:23.4
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202229 blocks [SONY DVD RW DW-D22A]
--------------------------------------------------------------
11:05:59 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D22A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510164992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202229 | lead-out | 1 | 0x41 | 0x00
11:06:00 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:06:00 PM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:06:00 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:06:00 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 6x (8,310 KB/s)
11:06:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:06:00 PM #15 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
11:06:00 PM #16 Text 0 File DVDR.cpp, Line 5876
Drive: SONY DVD RW DW-D22A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:06:00 PM #17 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
11:06:00 PM #18 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
11:15:40 PM #19 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D22A > start writing Lead-Out at LBA 2202229 (219A75h), lenght 0 blocks
11:15:40 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:16:31 PM #21 Text 0 File DVDR.cpp, Line 5876
Drive: SONY DVD RW DW-D22A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
11:16:31 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
bigeasyst
Newbie
|
12. December 2005 @ 08:57 |
Link to this message
|
Now, this one worked, but I don't think it works at 8X or at least my last attempt didn't. Can you guys tell me how to burn without having to backup to my hard drive? The programs I use to rip are DVD Shrink 3.2.0.15 and DVD Decrypter 3.5.4.0. I also just recently purchased AnyDVD. Any help would be greatly appreciated. Oh ya, one other thing. The Sony -R's I was using, which are the same discs as the +R's burned at 8X no problems ever, so it's weird that I would have trouble with the +R's at the same speed I think.
|
Moderator
|
12. December 2005 @ 11:34 |
Link to this message
|
Quote:
Recorder: <SONY DVD RW DW-D22A> Version: BYS2
- newer firmware BYS3, dated Nov 17, 2004 is here - http://dhc014.rpc1.org/indexOEM.htm#DW-D22A
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
bigeasyst
Newbie
|
14. December 2005 @ 11:06 |
Link to this message
|
|
How do I install that firmware? It will only let me download it in binary format and I don't know what to do with it.
|
Moderator
|
14. December 2005 @ 12:28 |
Link to this message
|
hi, just d/loaded the firmware to see what's in the zipfile and got lucky - there's a readme file in there, and part of it says "
Flash in Windows using "LtnFW".
...so...see here - http://dhc014.rpc1.org/howto.htm
you can use ghe lite-on utility 'LtnFW' as your Sony is a rebadged Lite-on
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
bigeasyst
Newbie
|
14. December 2005 @ 15:32 |
Link to this message
|
|
Thanks a lot for all your help. I never would have found how to do that. Appreciate it.
|
|
Advertisement
|
|
|
Moderator
|
14. December 2005 @ 21:57 |
Link to this message
|
|
no worries, keep us posted
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
