Not sure what's happening

AfterDawn.com

Mobile/PDA About Us Advertise here


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Thursday 2.10.2025 / 18:58

Search AfterDawn Forums:

In English

Suomeksi

På svenska

afterdawn.com > forums > software specific discussion > dvd shrink forum > not sure what's happening

Browse by topic

Forums

Forums

Start a new thread

Not sure what's happening

Jump to:

Posted

Message

Page:	1	2	Next >

Pariah

Member

9. December 2005 @ 15:52

Link to this message

I've been using Verbatims for quite some time and usually have good luck with them (ie they play well, don't crash during Nero Burn on DVD Shrink). Lately I've been having more DVDs die during the burn cycle (ie "Burn Cycle Failed" in DVD Shrink). I've also had people tell me that DVDs I've loaned them are stopping in mid-play. In addition, when I checked the back of one of my burned discs I saw the normal burned areas (they are visually darker than unburned areas) but on one I noticed a ring of unburned area in the middle of the DVD. I've never seen that happen before - as I've always seen the unburned space at the edge of the DVD, not the middle. So, my concerns are:

1 - did I somehow get a bad lot of Verbatims?
2 - did my DVD Shrink/Nero get a bug?
3 - is my burner drive going bad?

I don't have much money to replace my burner, and unfortunately the Verbatims I'm using are the first spindle in a lot of 10 100-DVD spindles I bought (ie a lot of money lost if it's the media). I think I'm pretty screwed whatever the source, but I'd like to get a handle on what is the problem as I don't want to replace a good burner nor toss good media if I simply make a guess. Anybody know what I should do?

Advertisement

Bluedlfin

Junior Member

9. December 2005 @ 16:54

Link to this message

I think#3 is your answer save your blanks

SithVader

Newbie

9. December 2005 @ 19:08

Link to this message

I would go with number 3 as well.

But...one thing I'm curious about...have you installed anything on your computer recently that may have caused the DVD burner to flake out? The reason I ask is because some burning programs are not compatible with others if they reside on the same system. So even if the burn goes well when you play it you end up with a coaster.

Another option is: Is your virus scanner off and firewall blocked? What also can happen is the scanner could start a process and then next thing you'll be looking at is another coaster since the scanner will consume 100% of all CPU cycles. The firewall question is interesting because if you have it open and there is a process polling outside then you can have shared resources there too. Not a good situation to be in.

Anyway...those are my thoughts.

Pariah

Member

10. December 2005 @ 04:08

Link to this message

Only new software (aside from Anti-Virus update) is DVDFab Decrypter. I have had occassions when I'm running one of my programs and the anti-virus program starts downloading and installing an update automatically, slowwing everything down - but I haven't seen it doing so during a burn cycle, only during ripping and shrinking. I've used my burner a lot, so it may be a culprit to my problems.

Moderator

10. December 2005 @ 07:14

Link to this message

we could try ruling out Nero - let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.

You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

Pariah

Member

20. December 2005 @ 16:35

Link to this message

Now I'm really frustrated. I broke down and bought a new burner (Sony DRX-81OUL 16x Dual Layer +/-R, external drive). I'm still having tons of problems. Two main problems, which are different from what I had before, but still a nightmare.

First, about 1 in 3 DVDs will stop burning in the middle of the burn cycle (Nero driven by Shrink). It will get to some % level and then simply stop accessing the drive. Shrink will not let me close out the burn status window, nor will my drive allow me to eject the DVD. I have to turn off the burner, and reboot the computer to break out of the frozen burn cycle.

Related to the first, some of the DVDs are taking very long to burn at 4 or 8x speed, even compared to my old 2.4x drive. My old drive ran about 23 minutes for a burn of a full compressed disk. Sometimes at 8x speed it will take 40 minutes to burn a similar DVD. This is not as frequent as the total freeze up mentioned above, and the final product appears to play on these slow, but completed, runs.

The other problem I'm encountering is with the sytem crashing the moment it switches from Encoding to Burning in Shrink. I will get a message along the lines of "Drive is in use by another application", when the drive is only used for burning from Shrink, and should not be in use.

I was going to email my Nero log to Creaky or one of the other Afterdawn moderators to review, but could not figure out how to do so and I don't want to post it here in the public forum. Any advice? Could my new drive be bad too, or is it likely the media (verbatim) or the software?

enrage

Junior Member

20. December 2005 @ 18:19

Link to this message

want to make things easy?

reformat and reinstall your OS.
make sure you have the latest firmware for your burner

start using sony or taiyo yuden 4x dvd-r's. i have the same burner as you.

AfterDawn Addict

21. December 2005 @ 03:03

Link to this message

Posting the log file here is normal. Just remove (edit out) your serial number for Nero. That way no unscrupulous person can steal it.

By posting it here you get many eyes looking at it and generally will pick up everything that someone else misses.

How much ram does your system have? What is the processor?

For great guides:
http://home.comcast.net/~bbmayo/index.html

Pariah

Member

21. December 2005 @ 12:33

Link to this message

I have a Pentium 4 - 3.6 with like a gig of memory. Could it be my firewall software as both my modem and my burner use USB ports?

Pariah

Member

21. December 2005 @ 14:18

Link to this message

How do I reformat and reinstall my OS. I don't have any software for my computer - it was all pre-installed.

AfterDawn Addict

21. December 2005 @ 14:51

Link to this message

I would not do the OS except as a last resort. Post the log file and we can try to figure it out.

For great guides:
http://home.comcast.net/~bbmayo/index.html

Pariah

Member

21. December 2005 @ 16:03

Link to this message

Here is my most recent stuff in my log (does not appear to hold much as it only goes back a day or two - probably because I've had to re-run the damn thing so many times to get it to work right).

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 136MB (140196kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.12.2005
NeroAPI
5:02:45 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

5:02:45 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

5:02:45 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

5:02:45 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

5:02:45 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

5:02:45 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

5:02:45 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

5:02:46 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

5:02:49 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286127 (508:01.52)

5:02:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

5:02:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

5:02:49 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

5:02:49 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682297344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

5:02:50 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

5:02:50 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

5:02:50 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

5:02:50 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:02:50 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099D7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

5:02:50 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

5:10:40 PM #20 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

5:10:40 PM #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

5:10:58 PM #22 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[20.12.2005]------------------------------------
17:02:45 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 144MB (148436kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.12.2005
NeroAPI
5:21:27 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

5:21:27 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

5:21:27 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

5:21:27 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

5:21:27 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

5:21:27 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

5:21:27 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

5:21:27 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

5:21:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2195615 (487:54.65)

5:21:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

5:21:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

5:21:28 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2195616 (2195616) = #2195616/487:54.66
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2195616 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

5:21:28 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4496928768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2195616 | lead-out | 1 | 0x00 | 0x41

5:21:28 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

5:21:28 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

5:21:28 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

5:21:28 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:21:28 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x096C7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

5:21:28 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

5:29:00 PM #20 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 2195616 (2180A0h), lenght 0 blocks

5:29:01 PM #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

5:29:19 PM #22 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[20.12.2005]------------------------------------
17:21:27 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 128MB (131828kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.12.2005
NeroAPI
8:11:02 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

8:11:02 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

8:11:02 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

8:11:04 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

8:11:04 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

8:11:04 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

8:11:04 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

8:11:05 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

8:11:06 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286127 (508:01.52)

8:11:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

8:11:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

8:11:06 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

8:11:06 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682297344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

8:11:12 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

8:11:12 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

8:11:12 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

8:11:12 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:11:12 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09AD7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

8:11:12 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

8:19:06 PM #20 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

8:19:06 PM #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

8:19:25 PM #22 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[20.12.2005]------------------------------------
20:11:03 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 136MB (139528kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.12.2005
NeroAPI
9:01:19 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

9:01:19 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

9:01:19 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

9:01:20 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

9:01:20 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

9:01:20 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:01:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:01:20 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

9:01:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2193423 (487:25.48)

9:01:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

9:01:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

9:01:24 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2193424 (2193424) = #2193424/487:25.49
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2193424 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

9:01:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4492439552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2193424 | lead-out | 1 | 0x00 | 0x41

9:01:25 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

9:01:25 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

9:01:25 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

9:01:25 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:01:25 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x095A7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

9:01:25 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

9:08:58 PM #20 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 2193424 (217810h), lenght 0 blocks

9:08:58 PM #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

9:09:17 PM #22 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[20.12.2005]------------------------------------
21:01:19 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 131MB (134824kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.12.2005
NeroAPI
9:19:41 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

9:19:41 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

9:19:41 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

9:19:41 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

9:19:41 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

9:19:41 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:19:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:19:41 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

9:19:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2200207 (488:56.07)

9:19:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

9:19:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

9:19:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2200208 (2200208) = #2200208/488:56.8
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2200208 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

9:19:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4506333184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2200208 | lead-out | 1 | 0x00 | 0x41

9:19:43 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

9:19:43 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

9:19:43 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

9:19:43 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:19:43 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09AD7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

9:19:43 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

9:27:16 PM #20 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 2200208 (219290h), lenght 0 blocks

9:27:16 PM #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

9:27:35 PM #22 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[20.12.2005]------------------------------------
21:19:41 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 147MB (151396kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.12.2005
NeroAPI
9:38:29 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

9:38:29 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

9:38:29 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

9:38:29 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

9:38:29 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

9:38:29 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:38:29 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:38:29 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

9:38:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2209487 (490:59.62)

9:38:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

9:38:30 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

9:38:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2209488 (2209488) = #2209488/490:59.63
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2209488 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

9:38:30 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4525338624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2209488 | lead-out | 1 | 0x00 | 0x41

9:38:32 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

9:38:32 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

9:38:32 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

9:38:32 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:38:32 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099D7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

9:38:32 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

9:46:08 PM #20 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 2209488 (21B6D0h), lenght 0 blocks

9:46:08 PM #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

9:46:26 PM #22 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[20.12.2005]------------------------------------
21:38:29 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 154MB (158060kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.12.2005
NeroAPI
11:46:12 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

11:46:12 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

11:46:12 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

11:46:12 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

11:46:12 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

11:46:12 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

11:46:12 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

11:46:12 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

11:46:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286111 (508:01.36)

11:46:13 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

11:46:13 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

11:46:13 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

11:46:13 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682264576, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

11:46:14 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

11:46:14 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

11:46:14 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

11:46:14 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:46:14 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08AA7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

11:46:14 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

11:54:04 PM #20 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

11:54:05 PM #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

11:54:23 PM #22 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[20.12.2005]------------------------------------
23:46:12 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 176MB (180736kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2005
NeroAPI
7:39:52 AM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

7:39:52 AM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

7:39:52 AM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

7:39:52 AM #4 Text 0 File Reader.cpp, Line 118
Reader running

7:39:52 AM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

7:39:52 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

7:39:52 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

7:39:52 AM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

7:39:53 AM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286127 (508:01.52)

7:39:53 AM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

7:39:53 AM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

7:39:53 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

7:39:53 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682297344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

7:39:53 AM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

7:39:53 AM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

7:39:53 AM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

7:39:53 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:39:53 AM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099D7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

7:39:53 AM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

3:10:15 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x016D0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x10 0xE5 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:10:15 PM #21 Text 0 File Writer.cpp, Line 455
15:10:15.109 SONY DVD RW DRU-810A : WriteBuffer reduced to 32768 Bytes

3:10:15 PM #22 Text 0 File Writer.cpp, Line 318
15:10:15.125 - SONY DVD RW DRU-810A : Queue again later (Intervall : 5msec)

3:10:15 PM #23 Text 0 File Writer.cpp, Line 444
SCSI-Layer send CDRERR_BUFFER_TO_BIG to writer

3:10:15 PM #24 Text 0 File Writer.cpp, Line 455
15:10:15.218 SONY DVD RW DRU-810A : WriteBuffer reduced to 30720 Bytes

3:10:16 PM #25 Text 0 File Writer.cpp, Line 455
15:10:16.484 SONY DVD RW DRU-810A : WriteBuffer reduced to 28672 Bytes

3:10:16 PM #26 Text 0 File Writer.cpp, Line 455
15:10:16.484 SONY DVD RW DRU-810A : WriteBuffer reduced to 26624 Bytes

3:10:16 PM #27 Text 0 File Writer.cpp, Line 455
15:10:16.500 SONY DVD RW DRU-810A : WriteBuffer reduced to 24576 Bytes

3:10:16 PM #28 Text 0 File Writer.cpp, Line 455
15:10:16.500 SONY DVD RW DRU-810A : WriteBuffer reduced to 22528 Bytes

3:10:16 PM #29 Text 0 File Writer.cpp, Line 455
15:10:16.515 SONY DVD RW DRU-810A : WriteBuffer reduced to 20480 Bytes

3:10:16 PM #30 Text 0 File Writer.cpp, Line 455
15:10:16.515 SONY DVD RW DRU-810A : WriteBuffer reduced to 18432 Bytes

3:10:16 PM #31 Text 0 File Writer.cpp, Line 455
15:10:16.515 SONY DVD RW DRU-810A : WriteBuffer reduced to 16384 Bytes

3:10:16 PM #32 Text 0 File Writer.cpp, Line 455
15:10:16.531 SONY DVD RW DRU-810A : WriteBuffer reduced to 14336 Bytes

3:10:16 PM #33 Text 0 File Writer.cpp, Line 455
15:10:16.531 SONY DVD RW DRU-810A : WriteBuffer reduced to 12288 Bytes

3:10:16 PM #34 Text 0 File Writer.cpp, Line 455
15:10:16.531 SONY DVD RW DRU-810A : WriteBuffer reduced to 10240 Bytes

3:10:16 PM #35 Text 0 File Writer.cpp, Line 455
15:10:16.546 SONY DVD RW DRU-810A : WriteBuffer reduced to 8192 Bytes

3:10:16 PM #36 Text 0 File Writer.cpp, Line 455
15:10:16.546 SONY DVD RW DRU-810A : WriteBuffer reduced to 6144 Bytes

3:10:16 PM #37 Text 0 File Writer.cpp, Line 455
15:10:16.562 SONY DVD RW DRU-810A : WriteBuffer reduced to 4096 Bytes

3:10:16 PM #38 Text 0 File Writer.cpp, Line 455
15:10:16.562 SONY DVD RW DRU-810A : WriteBuffer reduced to 2048 Bytes

3:10:16 PM #39 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0F221000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x10 0xE5 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:10:16 PM #40 Text 0 File Writer.cpp, Line 448
Recorder-Buffer cannot be reduced any more

3:10:16 PM #41 CDR -500 File Writer.cpp, Line 335
SCSI command aborted

3:10:17 PM #42 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

3:10:17 PM #43 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader

3:10:17 PM #44 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0F221000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x10 0xE5 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:10:17 PM #45 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099D7000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:10:17 PM #46 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:10:17 PM #47 CDR -500 File WriterStatus.cpp, Line 162
SCSI command aborted

3:10:17 PM #48 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

3:10:17 PM #49 Phase 38 File APIProgress.cpp, Line 235
Burn process failed at 8x (11,040 KB/s)

3:10:27 PM #50 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:10:27 PM #51 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:11:02 PM #52 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:11:02 PM #53 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:11:02 PM #54 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099D7000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:11:02 PM #55 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

3:11:02 PM #56 CDR -500 File BurnCDUtils.cpp, Line 352
SCSI command aborted

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[21.12.2005]------------------------------------
07:39:52 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 105MB (108132kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2005
NeroAPI
5:17:06 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

5:17:06 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

5:17:06 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

5:17:06 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

5:17:06 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

5:17:06 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

5:17:06 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

5:17:06 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

5:17:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286111 (508:01.36)

5:17:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

5:17:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

5:17:10 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

5:17:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682264576, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

5:17:10 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

5:17:10 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

5:17:10 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

5:17:10 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:17:11 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099C7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

5:17:11 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

5:25:01 PM #20 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

5:25:01 PM #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

5:25:19 PM #22 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[21.12.2005]------------------------------------
17:17:06 Robot error messages from:
====== *** NeroAPI, History File *** ======

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 130MB (133984kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2005
NeroAPI
7:42:26 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

7:42:26 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

7:42:26 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

7:42:28 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

7:42:28 PM #5 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-810A running

7:42:29 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

7:42:29 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

7:42:29 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

7:42:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286127 (508:01.52)

7:42:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

7:42:30 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

7:42:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

7:42:30 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682297344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

7:42:34 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started

7:42:34 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed

7:42:35 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 8x (11,040 KB/s)

7:42:35 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:42:35 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099B7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

7:42:35 PM #19 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

7:46:00 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x018F0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x06 0x18 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:00 PM #21 Text 0 File Writer.cpp, Line 455
19:46:00.203 SONY DVD RW DRU-810A : WriteBuffer reduced to 32768 Bytes

7:46:00 PM #22 Text 0 File Writer.cpp, Line 318
19:46:00.203 - SONY DVD RW DRU-810A : Queue again later (Intervall : 5msec)

7:46:00 PM #23 Text 0 File Writer.cpp, Line 444
SCSI-Layer send CDRERR_BUFFER_TO_BIG to writer

7:46:00 PM #24 Text 0 File Writer.cpp, Line 455
19:46:00.203 SONY DVD RW DRU-810A : WriteBuffer reduced to 30720 Bytes

7:46:00 PM #25 Text 0 File Writer.cpp, Line 455
19:46:00.203 SONY DVD RW DRU-810A : WriteBuffer reduced to 28672 Bytes

7:46:00 PM #26 Text 0 File Writer.cpp, Line 455
19:46:00.218 SONY DVD RW DRU-810A : WriteBuffer reduced to 26624 Bytes

7:46:00 PM #27 Text 0 File Writer.cpp, Line 455
19:46:00.218 SONY DVD RW DRU-810A : WriteBuffer reduced to 24576 Bytes

7:46:00 PM #28 Text 0 File Writer.cpp, Line 455
19:46:00.234 SONY DVD RW DRU-810A : WriteBuffer reduced to 22528 Bytes

7:46:00 PM #29 Text 0 File Writer.cpp, Line 455
19:46:00.234 SONY DVD RW DRU-810A : WriteBuffer reduced to 20480 Bytes

7:46:00 PM #30 Text 0 File Writer.cpp, Line 455
19:46:00.234 SONY DVD RW DRU-810A : WriteBuffer reduced to 18432 Bytes

7:46:00 PM #31 Text 0 File Writer.cpp, Line 455
19:46:00.250 SONY DVD RW DRU-810A : WriteBuffer reduced to 16384 Bytes

7:46:00 PM #32 Text 0 File Writer.cpp, Line 455
19:46:00.250 SONY DVD RW DRU-810A : WriteBuffer reduced to 14336 Bytes

7:46:00 PM #33 Text 0 File Writer.cpp, Line 455
19:46:00.250 SONY DVD RW DRU-810A : WriteBuffer reduced to 12288 Bytes

7:46:00 PM #34 Text 0 File Writer.cpp, Line 455
19:46:00.265 SONY DVD RW DRU-810A : WriteBuffer reduced to 10240 Bytes

7:46:00 PM #35 Text 0 File Writer.cpp, Line 455
19:46:00.265 SONY DVD RW DRU-810A : WriteBuffer reduced to 8192 Bytes

7:46:00 PM #36 Text 0 File Writer.cpp, Line 455
19:46:00.281 SONY DVD RW DRU-810A : WriteBuffer reduced to 6144 Bytes

7:46:00 PM #37 Text 0 File Writer.cpp, Line 455
19:46:00.281 SONY DVD RW DRU-810A : WriteBuffer reduced to 4096 Bytes

7:46:00 PM #38 Text 0 File Writer.cpp, Line 455
19:46:00.281 SONY DVD RW DRU-810A : WriteBuffer reduced to 2048 Bytes

7:46:00 PM #39 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0F141000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x06 0x18 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:00 PM #40 Text 0 File Writer.cpp, Line 448
Recorder-Buffer cannot be reduced any more

7:46:00 PM #41 CDR -500 File Writer.cpp, Line 335
SCSI command aborted

7:46:00 PM #42 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

7:46:00 PM #43 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader

7:46:01 PM #44 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0F141000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x06 0x18 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:01 PM #45 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099B7000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:01 PM #46 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099B7000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:01 PM #47 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:01 PM #48 CDR -500 File WriterStatus.cpp, Line 162
SCSI command aborted

7:46:01 PM #49 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

7:46:01 PM #50 Phase 38 File APIProgress.cpp, Line 235
Burn process failed at 8x (11,040 KB/s)

7:46:11 PM #51 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:11 PM #52 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:32 PM #53 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:32 PM #54 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:32 PM #55 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x099B7000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:32 PM #56 SCSI -500 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:46:32 PM #57 CDR -500 File BurnCDUtils.cpp, Line 352
SCSI command aborted

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[21.12.2005]------------------------------------
19:42:26 Robot error messages from:
====== *** NeroAPI, History File *** ======

Pariah

Member

21. December 2005 @ 16:20

Link to this message

Just got the "In use by another application" error. Shrink was the only open program at the time. Here is the printout from that one:

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 247MB (253728kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2005
NeroAPI
9:16:39 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started

9:16:39 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)

9:16:39 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted

9:16:39 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

9:16:39 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:16:39 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:16:39 PM #7 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

9:16:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286127 (508:01.52)

9:16:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

9:16:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

9:16:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD RW DRU-810A ]
--------------------------------------------------------------

9:16:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-810A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682297344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

9:16:43 PM #13 Phase 156 File APIProgress.cpp, Line 235
Drive is in use by another application

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Pariah

Member

23. December 2005 @ 03:16

Link to this message

Anybody have a chance to review and identify what may be the cause of my tech difficulties?

Moderator

23. December 2005 @ 03:22

Link to this message

Quote:
Nero API version: 6.0.0.11

- my God that version is out of the bible, update to latest 6.x version, 6.6.0.18 (Update-Package 1) from here - http://www.nero.com/nero6/enu/nero-up.php

Quote:
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b

- as you're saying your burner is actually an 810UL, the official Sony firmware page states that the latest version of firmware is 2.0D, dated 19/12/05 - http://sony.storagesupport.com/dvdrw/firmware.htm#810ul
See my comment further down about your current firmware being out of date and not recognising the blank discs you're using

Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

- yup, Nero's too old to recognise your burner

Quote:
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286127 (508:01.52)

508:01:52 sounds suspiciously close to the outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space

Quote:
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

- the burner can't recognise that disc properly, here's an example (not the best example as it's CMC but it's an example) of what it should look like, ie when the firmware's up to date you see a 3line paragraph like this -

Quote:
Recorder: DVDRW IDE1004, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

Quote:
Drive is in use by another application

- there's a big clue, try unticking the tickbox as per my link here -
http://i5.photobucket.com/albums/y178/creaky/untickcdrecordinginXP.jpg

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

This message has been edited since posting. Last time this message was edited on 23. December 2005 @ 03:33

ace_102

Suspended permanently

23. December 2005 @ 05:03

Link to this message

i had the very same problem with my dvd shrink

its number 2

all you need to do is go to www.downloads.com and and get avg anti virus (for free) set it going to scan your whole computer it should fix it

it fixed mine

Pariah

Member

23. December 2005 @ 09:07

Link to this message

Thanks. I've made appropriate upgrades and will change my Shrink to 4300. My tickbox wasn't ticked when I opened it, so I'm not sure about that one. I'll post if I have any more problems. Appreciate your taking the time to help me out.

Moderator

23. December 2005 @ 10:56

Link to this message

that's strange re the tickbox, but there are more than one reason why you get that error, that link i posted is always the first one that comes to mind.

but no worries, keep us posted on your progress.

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

Pariah

Member

23. December 2005 @ 11:20

Link to this message

I just burned my first DVD since I made the suggested changes. This copy worked (as in finished burn cycle - I haven't tried playing yet). One thing I noticed different is that Shrink burn cycle used to say Starting Burn Cycle at x speed and the next line to be displayed would be the burn successful. Now there is a line coming up between them saying Book Type Set to DVD-ROM. Do I want that, or should I deselect that in the Burn Options?

Moderator

23. December 2005 @ 11:25

Link to this message

Quote:
Now there is a line coming up between them saying Book Type Set to DVD-ROM. Do I want that, or should I deselect that in the Burn Options?

- nice one!, you wouldn't believe how many ppl/threads there are nonstop about booktyping (otherwise known as bitsetting). this sets (+R discs only) to dvd-rom format, which is supposed to fool a standalone player to think it's playing a standard pressed dvd such as you'd buy in a store. most newer players should be ok with standard -R discs so booktyping is just s'sposed to make discs play on pickier or older players

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

Pariah

Member

23. December 2005 @ 11:49

Link to this message

So does that mean that it doesn't really matter whether it is checked or not, but if I want to playback on an old player it is beneficial to have it checked (ie more likelihood of compatability if checked).

Moderator

23. December 2005 @ 12:09

Link to this message

yup, but if you got +R you may as well booktype them, it'll do it automatically from then off if it's ticked.

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

Pariah

Member

23. December 2005 @ 13:39

Link to this message

Crashed again. At 43% burned it just stopped burning. Here is log. I forgot to change size to 4300 due to dinnertime, but otherwise all else had been changed. Anything else to try?

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e

Recorder: <SONY DVD RW DRU-810A> Version: 2.0d - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD+RW ND-1100A D: CDRom0
SONY DVD RW DRU-810A E: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 109MB (111860kB)
Memory in use : 77
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.12.2005
NeroAPI
6:27:26 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

6:27:26 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

6:27:26 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

6:27:26 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

6:27:26 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

6:27:26 PM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-810A running

6:27:26 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

6:27:27 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

6:27:27 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

6:27:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

6:27:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

6:27:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

6:27:27 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:27:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DRU-810A]
--------------------------------------------------------------

6:27:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

6:27:28 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

6:27:28 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

6:27:28 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

6:27:28 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)

6:27:28 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:27:28 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0A9C0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

6:27:28 PM #22 Text 0 File DVDR.cpp, Line 6168
Drive: SONY DVD RW DRU-810A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

6:27:28 PM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM

6:27:28 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

6:33:02 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00E90000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x0E 0xD6 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:02 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0A9C1800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x0E 0xD6 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:02 PM #27 Text 0 File Mmc.cpp, Line 19440
Writer-Buffer for SONY DVD RW DRU-810A\H2 T0 reduced to 32768Bytes

6:33:02 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0A9C1800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x0E 0xD6 0x40 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:02 PM #29 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
SONY DVD RW DRU-810A\H2 T0

6:33:02 PM #30 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:02 PM #31 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:02 PM #32 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x083D6C00
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:02 PM #33 CDR -500 File WriterStatus.cpp, Line 167
SCSI command aborted
SONY DVD RW DRU-810A\H2 T0

6:33:02 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

6:33:02 PM #35 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x083D4E20
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:02 PM #36 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x083D4E20
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:03 PM #37 CDR -500 File WriterStatus.cpp, Line 172
SCSI command aborted
SONY DVD RW DRU-810A\H2 T0

6:33:03 PM #38 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession

6:33:03 PM #39 Phase 39 File APIProgress.cpp, Line 276
Burn process aborted

6:33:03 PM #40 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

6:33:03 PM #41 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

6:33:03 PM #42 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:33:22 PM #43 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======

Pariah

Member

23. December 2005 @ 14:09

Link to this message

Retried and it crashed again at 91%.

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e

Recorder: <SONY DVD RW DRU-810A> Version: 2.0d - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD+RW ND-1100A D: CDRom0
SONY DVD RW DRU-810A E: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 108MB (111400kB)
Memory in use : 77
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.12.2005
NeroAPI
6:49:46 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

6:49:46 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

6:49:46 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

6:49:46 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

6:49:46 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

6:49:46 PM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-810A running

6:49:46 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

6:49:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

6:49:47 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

6:49:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

6:49:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

6:49:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

6:49:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:49:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DRU-810A]
--------------------------------------------------------------

6:49:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

6:49:48 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

6:49:48 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

6:49:48 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

6:49:48 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

6:49:48 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:49:48 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AA90600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

6:49:48 PM #22 Text 0 File DVDR.cpp, Line 6168
Drive: SONY DVD RW DRU-810A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

6:49:48 PM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM

6:49:48 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

7:04:36 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0A310000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x1F 0xA9 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:36 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AA91800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x1F 0xA9 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:36 PM #27 Text 0 File Mmc.cpp, Line 19440
Writer-Buffer for SONY DVD RW DRU-810A\H2 T0 reduced to 32768Bytes

7:04:36 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AA91800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x1F 0xA9 0x80 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:36 PM #29 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
SONY DVD RW DRU-810A\H2 T0

7:04:36 PM #30 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:36 PM #31 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:36 PM #32 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08B36C00
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:36 PM #33 CDR -500 File WriterStatus.cpp, Line 167
SCSI command aborted
SONY DVD RW DRU-810A\H2 T0

7:04:36 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

7:04:36 PM #35 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08B34E20
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:37 PM #36 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08B34E20
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:37 PM #37 CDR -500 File WriterStatus.cpp, Line 172
SCSI command aborted
SONY DVD RW DRU-810A\H2 T0

7:04:37 PM #38 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession

7:04:37 PM #39 Phase 39 File APIProgress.cpp, Line 276
Burn process aborted

7:04:37 PM #40 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

7:04:37 PM #41 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

7:04:37 PM #42 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:04:56 PM #43 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 3:46:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======

Advertisement

dr_no

Member

24. December 2005 @ 05:31

Link to this message

To me it looks like you running low in the available memory department. Try this, disconnect from the internet pull the plug if you want too, restart your pc, upen up your task manager only, nothing else, disable all unnecessary processes including virusscan, then try to burn with Nero Burning ROM by adding your saved DVD to the VIDEO_TS folder. If you know how you can also do a test burn instead of straight to disk. Hope this helps/works.

Page:	1	2	Next >

Start a new thread

afterdawn.com > forums > software specific discussion > dvd shrink forum > not sure what's happening

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team

© 1999-2025 by AfterDawn Ltd.