|
|
|
Ricoh MP5240A (burning issues with 8x DVD+R discs)
|
|
|
Zayan
Suspended due to non-functional email address
|
26. December 2005 @ 03:49 |
Link to this message
|
|
Hi,
I am using a Ricoh DVD writer (Model: MP5240) and have the following problem:
I have been using this writer with no problems with lots of differents medias, but now suddenly I can't write on new EMTEC DVD+R I just bought a week ago. Therefore, I decided to buy another brand, thinking these EMTEC media are bad and went for PHILIPS DVD+R. Results: still not working. I am pretty sure these medias are ok unless a very weird coincidence, but I really doubt this is the case..
I do know my writer can only write up to 4x, but both discs here are labelled 8x certified as every new ones does now. Also, these are well known manufacturers on the market, so I am thinking more to a driver incompatibility, rather than HW or SW issue since I can still burn without problem on my current, but few remaining 4x speed DVD+ (Commodore, Sentinel, Sony) and on CD-R/RW
I updated to the latest driver (V1.19) from Ricoh website; no way either. Message says illegal disc for each copy I am trying, this using different burning softwares, as the ones delivered with my driver InterVideo (DVD Copy & Master) as with Nero 6.
Can someone help me.
Thanks
Yves
|
|
Advertisement
|
 |
|
|
Moderator
|
26. December 2005 @ 05:31 |
Link to this message
|
let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Zayan
Suspended due to non-functional email address
|
26. December 2005 @ 06:28 |
Link to this message
|
Hi,
There it is. Tx for your help.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.3
Recorder: <RICOH DVD+RW MP5240> Version: 1.19 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <OBVIOUS DVD-ROM MAGIC 62>Version: 6.00 - HA 2 TA 0 - 6.6.0.3
Adapter driver: <obvious> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-75FJA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : RICOH DVD+RW MP5240 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : OBVIOUS DVD-ROM MAGIC 626.00 obvious Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
RICOH DVD+RW MP5240 E: CDRom0
OBVIOUS DVD-ROM MAGIC 62 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2096108kB)
Free physical memory: 1493MB (1529844kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.12.2005
ISO compilation
12:31:42 AM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:31:42 AM #2 Text 0 File Reader.cpp, Line 127
Reader running
12:31:42 AM #3 Text 0 File Writer.cpp, Line 122
Writer RICOH DVD+RW MP5240 running
12:31:42 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:31:42 AM #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
12:31:57 AM #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1837817 (408:24.17, 3589MB)
12:31:57 AM #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
12:31:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: RICOH DVD+RW MP5240, Media type: DVD+R
12:31:57 AM #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
12:31:57 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1837968 (1837968) = #1837968/408:26.18
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1837968 blocks [RICOH DVD+RW MP5240]
--------------------------------------------------------------
12:32:04 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [RICOH DVD+RW MP5240] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3764158464, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1837968 | lead-out | 1 | 0x41 | 0x00
12:32:04 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:32:04 AM #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
12:32:04 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:32:04 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:32:04 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:32:04 AM #17 SCSI -1066 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03905000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:32:04 AM #18 SCSI -1066 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:32:04 AM #19 Text 0 File DVDR.cpp, Line 5611
Drive: RICOH DVD+RW MP5240
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
12:32:04 AM #20 CDR -1207 File DVDR.cpp, Line 4827
Book Type automatically set to: DVD-ROM
12:32:04 AM #21 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
12:32:19 AM #22 SCSI -1046 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03C90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
12:32:19 AM #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
12:32:19 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:32:19 AM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:32:20 AM #26 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:32:20 AM #27 SCSI -1066 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:32:20 AM #28 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12:32:20 AM #29 SCSI -1066 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:32:20 AM #30 Text 0 File DVDR.cpp, Line 5611
Drive: RICOH DVD+RW MP5240
Book Type request: DVD+R
Changing the Book Type was finished successfully, return code 0
12:32:20 AM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/31/2005 11:36:01 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:42 AM (Adapter driver for rec)
File 'Drivers\obvious.sys': Ver=6.0.0.0, size=74496 bytes, created 2/19/2004 10:39:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
neodave
Member
|
26. December 2005 @ 07:28 |
Link to this message
|
I'm sure Creaky will be along and check out your Nero log. Hopefully the answer lies there. But both Emtec and Philips are suspect at best for media.
|
Moderator
|
26. December 2005 @ 07:55 |
Link to this message
|
Quote:
Nero version: 6.6.0.3
- Nero's too old, latest 6.x version is 6.6.0.18, download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php
Quote:
Recorder: <RICOH DVD+RW MP5240> Version: 1.19
- firmware's up to date, albeit dated Feb 2004!! so the firmware is way out of date to cope with newer media.. - http://forum.rpc1.org/dl_firmware.php?download_id=1637
Quote:
Recorder: RICOH DVD+RW MP5240, Media type: DVD+R
- as i say, your firmware is lacking. this is similar to what you should see - Quote:
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
- ie a 3line paragraph when the firmware's up to date. The firmware has been neglected by Ricoh since Feb 2004, so i can't see a way forward other than to buy a new drive.... your firmware is integral to burning, if it's firmware can't recognise newer media you're gonna have to search high and low for 'older' media that the firmware is able to handle, but it's gonna be easier to spend a few quid/dollars and buy a new drive...
Quote:
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
- see previous comment
Quote:
Illegal disc
- see previous comment
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 26. December 2005 @ 07:55
|
|
neodave
Member
|
26. December 2005 @ 08:16 |
Link to this message
|
|
If those are real TYG02 they may be good after all.
|
Moderator
|
26. December 2005 @ 08:26 |
Link to this message
|
|
soz that TYG02 copy/paste was just an example
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Zayan
Suspended due to non-functional email address
|
26. December 2005 @ 09:36 |
Link to this message
|
|
I'll better choose to buy a new writer then, and sorry to say, not a Ricoh anymore (this lack of firmware update is the main reason, of course.) It's a pitty for such good piece of hardware which worked fine during the last 2 years for me and still does).
Thanks a lot for this analyze; I really appreciate your help and quick reaction.
Kind Rgds
Yves
|
Moderator
|
26. December 2005 @ 10:06 |
Link to this message
|
|
no worries, good luck with new burner; keep us posted if you like..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Zayan
Suspended due to non-functional email address
|
27. December 2005 @ 14:07 |
Link to this message
|
Hi all,
Just received answer from Ricoh concerning this problem. It confirm your log analyse, see below.
...
Thank you for your log file.
It does report incompatible media. Please use discs of up to 4 x (DVD+R and DVD +RW) . We suggest the following brands:
CD-R (74min./80min.): RICOH, Mitsubishi, Verbatim, TDK, Maxell, Taiyo Yuden, Mitsui
CD-RW (74min./80min.): RICOH, Mitsubishi,
DVD+R: Ricoh,Ritek,MMCC, Verbatim,Philips,Sony
DVD+RW: Ricoh,Ritek,MMCC, Verbatim,Philips,Sony
If you cannot find this media in the local market, you could purchase it from www.eshop.ricohpmmc.com
Best Regards,
RICOH Service Team
Massachusetts Avenue 4600
66953 Pirmasens, RP (Germany)
Lara Freiria
support@ricohpmmc.com
http://www.ricohpmmc.com
|
Moderator
|
27. December 2005 @ 22:19 |
Link to this message
|
|
yup, that's the crux of it, but it's getting harder to find 4x media..you'll be ok as long as you can find it, but now 16x media is becoming more common, there's gonna be even less 4x out there..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
taralynn
Newbie
|
28. December 2005 @ 07:54 |
Link to this message
|
Before you buy a new recorder, I have a Sony DVD burner and Nero software. I could not use the DVD+R only DVD-R will burn and play everywhere. Just a thought.... The DVD+R would play in my portable DVD player but would never play on any home DVD player until I started using the DVD-R. A friend told me this as she had the same problem.
|
|
Advertisement
|
|
|
Moderator
|
28. December 2005 @ 08:32 |
Link to this message
|
|
@taralynn - the problem is that Zayan can only use discs that are catered for by the drive, and 4x discs are not gonna be around forever; provided 4x discs are found then the burner can still be useful..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
