|
|
|
Problems burning DivX to DVD-R using Nero and others!
|
|
|
jaybt
Newbie
|
27. December 2005 @ 14:32 |
Link to this message
|
|
hi there, After several days even during Xmas of trying to get my DVD writer to work I am almost at the point of dispair! Even after all the great help on these forums I am still having trouble so my last resort before I completely give up is to write here and ask for some help!
First off Id like to admit im a newbie to DVD burning, even though ive been burning CD-Rs for years nothing prepared me for the complexity of DVD-R burning! What ill do now is just quickly run through my problem and also provide a log for reference of my last burn!
My NEC ND 4550A is set as a master on the secondary IDE, the hard disk being on the primary IDE as master.
I am using Nero 7 Premium edition and have also tried using CDburner Pro XP 3. I am trying to simply burn data i.e old divx files to DVD-R for archive purposes however I cannot seem to get a disc to actually work once it has burned, firstly it shows up as if nothing is burned to the disc and secondly when I double click the DVD_R in my computer it gives an error message saying that the "Disk is not Formatted" and that the data may be corrupt!
I have gone through nearly a whole pack of Verbatim DVD-R Advance Azo discs trying different combinations, turning on DMA for both hard disk and DVD drive as well as trying to burn as ISO and then in UDF format as well as using Joliet and other combos but nothing seems to work!
My simple question really is how do I burn data on to a DVD-R with as little fuss as possible? Its driving me nuts that I cant do it! Is my drive a dud? I know one slight problem is my low RAM which i intend to upgrade very soon (i currently have only 512MB DDR) but even then with all other programmes shut and all background programmes not tasked I just dont understand why i cant get a clean burn that does not produce a coaster! I even tuned the burn down to 2X speed and also tried 4X speed but no luck! In desperation I have bought Sony DVD+R 8X and used that however the disc I used also turned out to be a coaster!
Finally and most strange of all when I used a MAxell DVD-RW the burn was successful and the files obtainable? I cant understand how and why? Please help thank you!
here is my log for latest nero burn!
PS the log below was done before I changed over to master on secondary IDE and at a higher speed I foolishly did not save the burns at lower speed but hopefully you can make sense of it? if you require a new log ill provide it! Sorry for the long post I hope someone can help!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <_NEC DVD_RW ND-4550A> Version: 1.06 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-4550A >Version: 1.06 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-00CAA1 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG CD-R/RW SW-240B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-4550A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-240B E: CDRom0
_NEC DVD_RW ND-4550A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 32MB (33544kB)
Memory in use : 93 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.12.2005
UDF compilation
20:11:30 #1 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical
20:11:30 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
20:11:30 #3 Text 0 File Reader.cpp, Line 124
Reader running
20:11:30 #4 Text 0 File Writer.cpp, Line 113
Writer F: _NEC DVD_RW ND-4550A running
20:11:30 #5 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
20:11:30 #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2102959 (467:19.34, 4107MB)
20:11:30 #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
20:11:30 #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-4550A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
20:11:30 #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:11:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2102960 (2102960) = #2102960/467:19.35
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2102960 blocks [F: _NEC DVD_RW ND-4550A]
--------------------------------------------------------------
20:11:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: _NEC DVD_RW ND-4550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4306862080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2102960 | lead-out | 1 | 0x41 | 0x00
20:11:30 #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
20:11:31 #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
20:11:31 #14 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
20:11:31 #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
20:11:31 #16 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 12x (16,620 KB/s)
20:11:31 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:11:31 #18 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
20:11:31 #19 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
20:11:31 #20 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
20:11:31 #21 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:12:52 #22 Text 0 File Cdrdrv.cpp, Line 1197
20:12:52.546 - F: _NEC DVD_RW ND-4550A : Queue again later
20:13:34 #23 SPTI -1135 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 12 60 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x05220000: Len x10000
0x1F 61 A7 BC 9E 84 24 65 07 83 3F 8E B7 B6 A6 C1
0xCD 13 B2 2B 04 12 F4 D2 62 3E 21 6B 4A C6 8C 48
0xB6 B7 73 60 4F 0B 0B 4F 88 BB 5C 53 72 24 6F 41
20:13:34 #24 CDR -1135 File Writer.cpp, Line 302
Write error
F: _NEC DVD_RW ND-4550A
20:13:34 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:13:35 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
20:13:35 #27 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 4703
20:13:35 #28 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 12x (16,620 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 21/10/2002 09:33:40 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
laddyboy
AfterDawn Addict
|
27. December 2005 @ 14:43 |
Link to this message
|
|
|
jaybt
Newbie
|
27. December 2005 @ 16:47 |
Link to this message
|
Hi there laddyboy, Thanks for the reply.
Since that last post I went throught and actually upgraded the firmware to 1.07 and made sure the DMA was turned on for both WDC hard-disk and also the dvd-writer. I even burnt at 4X however after burning about 75% I got an error. I also turned off all background programmes running including my anti-virus etc!
This is the log! Any help would be appreciated, it would be nice to try and narrow down the problem, im working through most things I just dont see what else is left for me to do except perhaps to try some Maxell media which is DVD+R or DVD-R since the DVD-RW media works!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <_NEC DVD_RW ND-4550A> Version: 1.07 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-4550A >Version: 1.07 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-4550A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-4550A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 158MB (161904kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.12.2005
ISO compilation
01:57:43 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
01:57:43 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
01:57:43 #3 Text 0 File Reader.cpp, Line 124
Reader running
01:57:43 #4 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-4550A running
01:57:43 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
01:57:43 #6 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
01:57:44 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2145679 (476:49.04, 4190MB)
01:57:44 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
01:57:44 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-4550A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
01:57:44 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
01:57:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2145680 (2145680) = #2145680/476:49.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2145680 blocks [E: _NEC DVD_RW ND-4550A]
--------------------------------------------------------------
01:57:44 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: _NEC DVD_RW ND-4550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4394352640, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2145680 | lead-out | 1 | 0x41 | 0x00
01:57:44 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
01:57:44 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
01:57:44 #15 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
01:57:44 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
01:57:44 #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
01:57:44 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
01:57:44 #19 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
01:57:44 #20 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
01:57:44 #21 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
01:57:44 #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01:57:50 #23 Text 0 File Cdrdrv.cpp, Line 1197
01:57:50.625 - E: _NEC DVD_RW ND-4550A : Queue again later
02:10:47 #24 SPTI -1093 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 18 B9 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02
Buffer x03880000: Len x10000
0x95 59 50 65 76 D9 22 5A D1 38 D5 77 A1 B9 5E A4
0x1C E8 B6 DA A5 45 5A 48 82 63 99 E6 E0 88 F9 BC
0xB6 EC 93 4E B0 4F F8 3A 4B FF 14 9F 77 0A 7E 75
02:10:47 #25 CDR -1093 File Writer.cpp, Line 302
No seek complete
E: _NEC DVD_RW ND-4550A
02:10:47 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
02:10:47 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
02:10:47 #28 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1620223
02:10:47 #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 21/10/2002 09:33:40 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
laddyboy
AfterDawn Addict
|
27. December 2005 @ 17:29 |
Link to this message
|
|
In scanning the burn log, I didn't see anything jump out at me. If you can successfully burn other media, I would guess the problem is that the burner and that particular media just don't get along well. It happens sometimes. Let us know if you use different media and the results. I usually stick to +R media myself. The best are Verbatim, Taiyo Yuden, and Made-in-Japan labeled Fuji, Maxell, and Sony. Also limit your burn speed to half the rated speed of the media as a general rule.
Are you creating a data disk or are you using NeroVision Express to import your divx files into a dvd compilation? Have you tried backing up a commercial dvd? Does that burn correctly? Did you say that RW media works OK?
This message has been edited since posting. Last time this message was edited on 27. December 2005 @ 17:32
|
|
