|
copying from cmcs ?
|
|
Newbie
1 product review
|
2. January 2006 @ 23:46 |
Link to this message
|
|
alright, I have a question.
I have a few dvds currently on shitty Memorex CMCs.
So... If I were to perform a direct copy from the CMCs onto brand new TYs, would the new dvd work, or would the errors copy as well, how would memorex effect this? would the book-type remain the same? etc etc.
I'm planning on using Nero dvd disc-copy because it'll save time, and maybe quality too (?)
thank you sirs.
wearing salmon-flavored underwear, attracting the bears, repelling the girls
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
3. January 2006 @ 03:26 |
Link to this message
|
For disc to disc copy using Nero and ripping cmags: You're more likely to get failed burns. On a 4x speed OTF backup,you're talking about 15 mins or so.You've got to be able to read the disc while you write. Any major error-CRC-and it'll fail.If you can't get past that read error,you won't be able to rip.If you burned those cmags too fast,or at the max backup target-more read errors are likely.
I haven't had a single issue using OTF process.But I don't rip damaged originals or rip backups that were burned on crappy media.
Using DVD Shrink to rerip it may take about 20-25 mins depending on your pc's resources.
Another effective option,takes about 20 mins regardless-5 extra mins if I use a 598 mhz celeron or my 3300+ athlon 64 is dvd decrypter's Mode Iso read and Mode ISO write.DVD Decrypter is a more aggressive ripper,plus you can set it to booktype.
Open dvd decrypter
Mode: ISO read to hard drive,remember where those files go-5 mins!
Mode ISO write/locate that mds folder/burn.
While on that ISO write screen to ,open up the small folder on lower right side of screen. Then open the tab that matches your burner.Plextor/lite-on/benq/ricoh/nec/LG/Nutech are the models listed. Just set for dvd-rom/OK.
If you want to take a few extra mins,it may save you a few coasters and time of re-ripping them again for a third time.
Good Luck!
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
Moderator
|
3. January 2006 @ 07:30 |
Link to this message
|
good luck, i have 500 Bulkpaq Orange FAKE Grrrr! TYG02's that are mostly unplayable & uncopyable, even with the most aggressive copying methods. Hopefully your discs will be in better shape than this -
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 3. January 2006 @ 07:31
|
|
gear79
Suspended permanently
|
3. January 2006 @ 08:40 |
Link to this message
|
|
man, what is that............. the black hole?
1rst. sig compiled by phantom69 |
AfterDawn Addict
|
3. January 2006 @ 10:28 |
Link to this message
|
|
I second my buddy creaky and good luck on your super tough journey.
|
AfterDawn Addict
|
3. January 2006 @ 17:57 |
Link to this message
|
|
OMG, creaky's scans look like the "black screen of death"...there is barely enough "white" on the scans to tell it apart from the "black" part~ LOL
docTY~
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
Newbie
1 product review
|
3. January 2006 @ 17:58 |
Link to this message
|
Saugmon, thank you very much.
yeah I'm going to go with re-ripping to ISO and then burning through Nero (booktyping to dvd-rom as always)
I can see why using the disc-copy is a bad decision. quality is job number one. I can't believe how I was so unaware of my memorex problem. I am excited for this new media life I'm about to embark upon.
peace out homies.
wearing salmon-flavored underwear, attracting the bears, repelling the girls
|
AfterDawn Addict
|
3. January 2006 @ 18:02 |
Link to this message
|
|
using GOOD quality media can be a very rewarding experience~ :) i find myself very happy sometimes KNOWING that i made a crisp, clean, flawless backup on Taiyo Yuden media~
good luck on your journey...you shall be pleased now that you out of the reach of memosux~ :P
docTY~
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
Junior Member
|
3. January 2006 @ 21:44 |
Link to this message
|
Quote:
using GOOD quality media can be a very rewarding experience~ :) i find myself very happy sometimes KNOWING that i made a crisp, clean, flawless backup on Taiyo Yuden media~
Word! :)
|
AfterDawn Addict
6 product reviews
|
3. January 2006 @ 22:06 |
Link to this message
|
|
creaky,
I'll bet you're proud of that scan aren't you. I must be doin something wrong. My scans are mostly white. ;-)~~ *_*
Sorry, I couldn't resist.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 3. January 2006 @ 22:10
|
AfterDawn Addict
|
3. January 2006 @ 23:04 |
Link to this message
|
|
LOL....as are mine...mostly "white" too~ :)
i'm sure creaky's patting himself on the back while throwing those discs into his wood burner...LOL
docTY~
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
AfterDawn Addict
|
4. January 2006 @ 02:28 |
Link to this message
|
mkezele66:
Dvd decrypter's burn engine has a slight different variation from nero's. On the first few successful re-rips,make sure your stand alone/s are able to play them. From what I have seen,dvd decrypter's burn engine has more issues on a couple of my drives and my Nero backups have no issues on those stand alones. Just a heads up before you rip into all of them.
I have re-ripped a few teon cmags that were in the plus format with no trouble. All my backups have a reduced backup target of 4360 mbs so it keeps the burn about a mm away from the outer edge.In the crappier media,that edge is susceptible to uneven dye.
Good Luck!
|
Senior Member
|
4. January 2006 @ 07:41 |
Link to this message
|
I was able to save some of my Memosux CMCs by using DVD Decrypter and setting the crc read error retrys to 2. Depends on how many CRCs you run in to and if they cluster together. It may just give you a minor glitch in playback, or it could screw up at the best part of the show.. I gave up after running in to a disc that was taking over 6 hours to extract because of all the CRC errors. (i left the thing on and went to sleep). Now i never have any problems with my Verbs and Tys. Cost the same or less than the memosux, and are much better media.
Die CMC Mag!!! |
Senior Member
|
4. January 2006 @ 08:42 |
Link to this message
|
|
@MaxBurn hi :)
if i'm a tad slow, you can set your Killer Cat on me,but since i last saw you it looks as if Congratulations are in order on you becoming a Senior buddy. very well deserved
 gif by ireland
we cant help if you wont help yourself |
|
Advertisement
|
|
|
Senior Member
|
4. January 2006 @ 11:15 |
Link to this message
|
|
Hi Gurnard :) Thanks,
I must have passed some magic number. I feel pretty old lately, maybe that's it.
Die CMC Mag!!!
|
