|
|
|
need help with lite-on writer
|
|
|
Imhotep
Newbie
|
7. April 2003 @ 20:12 |
Link to this message
|
|
ok, i just bought a lite-on LTR-52246S writer.
when i try to install the nero software that came with it i get a message saying "the install wizard has been interupted, your system has not been modified"
and when i try to update the firmware from version "6s0a" to 6s0d" i get a message saying
"can't find ltr-52246s firmware: 6s01-6s0d drive!
this flash utility only supports LTR-52246S firmware 6s01-6s0d
can't find atapi drive!"
ok, so i have the writer set as master on the secondary ide (all by itself there) all the connectors are on tight and the writer is recognized at boot. it reads cd's no problem.
i'm running win98se.
anyone know what the problem is?
|
|
Advertisement
|
 |
|
|
|
Shoey
Suspended due to non-functional email address
|
8. April 2003 @ 17:57 |
Link to this message
|
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
 This message has been edited since posting. Last time this message was edited on 8. April 2003 @ 18:26
|
|
Imhotep
Newbie
|
8. April 2003 @ 22:04 |
Link to this message
|
|
no, all i have tried is to install nero and update the firmware, both in windows.
even if i havent updated the firmware, shouldnt the nero software that came with the burner install no problem?
|
|
Shoey
Suspended due to non-functional email address
|
9. April 2003 @ 04:59 |
Link to this message
|
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
|
|
Imhotep
Newbie
|
9. April 2003 @ 08:28 |
Link to this message
|
|
thanks Shoey
trouble is, as i mentioned above, i cant even update the firmware, it cant seem to find my "atapi drive" to flash.
i'm wondering if this is a hardware problem. i might just take this thing back.
|
|
Shoey
Suspended due to non-functional email address
|
10. April 2003 @ 02:50 |
Link to this message
|
|
Is the Litey listed in the Device Manager (DVD\CD-Roms)?(Right click) My Computer>properties>Hardware tab folder>Device Manager>click the + beside DVD\CD-Roms and your Litey should be listed. If it is, does it say: "this device is working properly"? If you don't see your Litey listed then right click DVD\CD-Rom and scan for hardware changes. When you attempt to flash your Litey with 6sOD firmware, the Litey is on port 3 m8. Post back if you are still encountering errors.
Shoey :)
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
|
|
Imhotep
Newbie
|
10. April 2003 @ 08:26 |
Link to this message
|
|
yep, its listed in device manager correctly, when i try to flash it, i dont get an option to tell the firmware which port the drive is using. it just says:
"can't find ltr-52246s firmware: 6s01-6s0d drive!
this flash utility only supports LTR-52246S firmware 6s01-6s0d
can't find atapi drive!"
|
|
Shoey
Suspended due to non-functional email address
|
10. April 2003 @ 09:51 |
Link to this message
|
|
Open MTKWinFlash IDE Mode and check "Launch ATAPI mode". Now locate your Litey at the top and for source, use the 6SOD binary firmware flash you downloaded form The Firmware page and be sure nothing is in your Litey drive and flash, then reboot m8. If that fails then you need to create a dos mode floppy disc using MTKFlash.
Shoey :)
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
This message has been edited since posting. Last time this message was edited on 10. April 2003 @ 09:52
|
|
Racemann
Member
|
10. April 2003 @ 19:40 |
Link to this message
|
|
I didn't like the latest 5.5.10.20 Nero. Too many freezes and it didn't know how to perform a compilation.
I'm using the same 52246S burner but on the 6SOC firmware. I've read how it actually slowed down burning speeds a bit.
It may just be my system though.
|
|
Advertisement
|
|
|
|
Racemann
Member
|
10. April 2003 @ 19:43 |
Link to this message
|
|
I should clarify that the 6SOD firmware gave some people slower burning performance.
|
|
