|
I've tried burning a DVD several times now. I've even tried running a simulation.
Every time it gives me the Illegal Disc error and NERO Error Code 1046 can be seen in the Log File.
A while back my burner quit a disc with a "Power Management failure" message and a sound that made me run across the room to see what happened.
I have since burned DVD's and they worked, so I know that the media is OK.
But this on keeps screwing up.
I've tried creating a DVD from the VOB files directly - I've tried creating an Image file and then use Copy DVD.
They all fail when they have to write the disc (the image plays well in Daemon Tools) - even the last try with simulation failed to even finish that.
Is my Burner fried or is something cheaper wrong??
-----------------------------------------------------------
LAST LOG FILE:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmer\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02-11-2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <SONY DVD RW DW-Q28A> Version: KYR1 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 2 - 7.0.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD-165H atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-Q28A atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITEON DVD-ROM LTD-165H F: CDRom0
SONY DVD RW DW-Q28A G: CDRom1
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 364MB (373508kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.2.2006
DVD-Copy on the fly
20:22:13 #1 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
20:22:13 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
20:22:13 #3 Text 0 File Reader.cpp, Line 124
Reader running
20:22:13 #4 Text 0 File Writer.cpp, Line 113
Writer G: SONY DVD RW DW-Q28A running
20:22:13 #5 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2143200 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
20:22:13 #6 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2143200 = 2143200, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
20:22:13 #7 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
20:22:13 #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2143199 (476:15.74, 4185MB)
20:22:13 #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
20:22:13 #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DW-Q28A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
20:22:13 #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:22:13 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2143200 (2143200) = #2143200/476:16.0
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143200 blocks [G: SONY DVD RW DW-Q28A]
--------------------------------------------------------------
20:22:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: SONY DVD RW DW-Q28A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4389273600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2143200 | lead-out | 1 | 0x41 | 0x00
20:22:13 #14 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
20:22:13 #15 Phase 28 File dlgbrnst.cpp, Line 1725
Speed measurement started
20:22:13 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
20:27:24 #17 Text 0 File WriterStatus.cpp, Line 116
<G: SONY DVD RW DW-Q28A> start writing Lead-Out at LBA 2143200 (20B3E0h), length 0 blocks
20:27:24 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:27:25 #19 Phase 29 File dlgbrnst.cpp, Line 1674
Speed measurement completed: 10.6x (14.680 KB/s)
20:27:25 #20 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 8x (11.080 KB/s)
20:27:25 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
20:27:25 #22 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
20:27:25 #23 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
20:27:25 #24 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
20:27:25 #25 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:27:43 #26 Text 0 File Cdrdrv.cpp, Line 1197
20:27:43.968 - G: SONY DVD RW DW-Q28A : Queue again later
20:58:31 #27 SPTI -1046 File SCSIPassThrough.cpp, Line 323
G: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 15 13 A0 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x04f70000: Len x10000
0x00 00 01 BA 44 12 A5 FA D5 99 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 FC 3E D1 A3 46 18 6E 34 68
0xD1 86 1B 8D 1A 34 61 86 E3 46 8D 18 61 B8 D1 A3
20:58:31 #28 CDR -1046 File Writer.cpp, Line 302
Illegal disc
G: SONY DVD RW DW-Q28A
20:58:31 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:58:31 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
20:58:32 #31 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1381279
20:58:36 #32 Phase 34 File dlgbrnst.cpp, Line 1725
Simulation failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28-10-2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04-08-2004 06:59:41 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
"I do not suffer from Insanity, I enjoy every minute of it."
Daedalus. Ruler of the Universe and part-time tape measurer
|
