|
How to use Nero to make data DVDs, using DVD+R DL discs?
All I want to do is backup up some data.
Heck, it doesn't even have to be Nero. I am willing to use ANY software that knows how to make good DL burns of DATA discs.
I already know how to use DVD Decrypter to burn DL discs from ISO images. My burner and media work fine for that.
But, most of the time, my data burns fail, usually within 30 seconds.
I cannot get consistent results. Once in awhile it makes a good backup. Most of the time, the write fails less than 30 seconds after it starts. I think soon I will be able to build a house from all the $3/apiece Verbatim coasters I am creating with Nero.
I had experts online ask me to (1) increase RAM, so I did, from 512MB to 1.5GB (2) to upgrade Nero. So I did, from 6.3 to 6.6.0.18 (3) to turn on DMA, so I ran DVD Fab and it said it did so (4) to run Roxizap to get rid of old Roxio elements, so I did. (5) to use only Verbatim DVD+R discs, so I got 3 boxes of them.
I even took the step of islolating my Firewire devices on seperate buses.
Well, I'm still creating coasters like candy, and I'm exhausted. It is mind-boggling why it is so hard to consistently burn good DL discs.
Today I needed to backup around 7GB of data files to a DVD+R DL, using Nero 6.6 and also Verbatim DVD+R DL discs. And it failed again.
Is anyone able to give me a clue why it failed below?
Also, people have asked me to change the DMA from off to on. I did so using DVD Fab, but still some of them show as off. I should point out that 2 of those drives are SCSI so they don?t seem to have a setting for changing this.
Here is the Nero log for most recent fail:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:03:20 AM
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <SONY DVD RW DRU-810A> Version: 2.0d - HA 4 TA 6 - 6.6.0.18
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1401>Version: 1009 - HA 3 TA 2 - 6.6.0.18
Adapter driver: <adpu160m> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-00CAA0 atapi Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD1200BB-00CAA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : CDWRITER IDE5224 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD2000JB-00GVA0 08.0 ultra Port 2 ID 0 DMA: Off
DiskPeripheral : SEAGATE ST318406LW 0109 adpu160m Port 3 ID 0 DMA: Off
DiskPeripheral : SEAGATE ST318406LW 0109 adpu160m Port 3 ID 1 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M14011009 adpu160m Port 3 ID 2 DMA: Off
=== CDRom-Device-Map ===
CDWRITER IDE5224 Z: CDRom2
SONY CD-RW CRX300E J: CDRom3
TOSHIBA DVD-ROM SD-M1401 I: CDRom0
SONY DVD RW DRU-810A N: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 774MB (793492kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.3.2006
ISO compilation
6:20:52 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:20:52 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
6:20:52 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-810A running
6:20:52 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:20:53 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:20:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4121071 (915:47.46, 8048MB)
6:20:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:20:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R9 Double Layer
6:20:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:20:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4121072 (4121072) = #4121072/915:47.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4121072 blocks [SONY DVD RW DRU-810A]
--------------------------------------------------------------
6:20:53 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8439955456, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4121072 | lead-out | 1 | 0x41 | 0x00
6:20:54 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:20:54 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
6:20:54 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:20:54 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
6:20:54 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:20:54 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 463
Disc finalized, LBA total Image size: 4121072 (8048MB), Last LBA L0: 2060543 (4024MB)
6:20:54 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 4, TA 6, LUN 0, buffer 0x0CE60800
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0B
0x32 0x30 0x74 0x72 0x24 0x00
6:20:54 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 628
L0 Data Zone Capacity set to 2060544 (1F7100h, 4024MB) -> OK, confirmed setting
6:20:54 PM #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 655
Burning Layer 1
6:20:54 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 665
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
6:20:54 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 4, TA 6, LUN 0, buffer 0x0CE60800
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0B
0x32 0x30 0x74 0x72 0x24 0x00
6:20:54 PM #23 Text 0 File DVDR.cpp, Line 6168
Drive: SONY DVD RW DRU-810A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
6:20:54 PM #24 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
6:20:54 PM #25 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
6:21:19 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 4, TA 6, LUN 0, buffer 0x0C520000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0B
0x32 0x30 0x74 0x72 0x0C 0x00
6:21:19 PM #27 CDR -1135 File Writer.cpp, Line 311
Write error
6:21:19 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:21:19 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:21:19 PM #30 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 4, TA 6, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0B
0x32 0x30 0x74 0x72 0x72 0x03
6:21:19 PM #31 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
6:21:19 PM #32 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
6:21:19 PM #33 Text 0 File DVDR.cpp, Line 6168
Drive: SONY DVD RW DRU-810A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
6:21:19 PM #34 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 4:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 5/21/2005 4:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\adpu160m.sys': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 4:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
RobertJ---San Diego
Windows XP Pro, SP2
P4, 1.9GHZ, 1.5GB RAM, 1.1TB in 7 Hard drives.
DVD drive: Sony DRX-810UL Dual Layer via firewire, firmware 2.0d
Nero 6.6.0.18. USB2 and Firewire.
Ulead Video Studio 9
DVD Decrypter 3.5.4
DVDShrink 3.2.0.15
AVI2DVD 0.4.3 beta
Quicktime 7.0.4
Panasonic PV-GS65 Mini-DV camcorder
|
