|
Hello.
All of a sudden yesterday, my Pioneer DVDR-110D burner decided it wouldn't burn anything - anything at all.
Data, music, nothing will burn.
I've tried using both Nero and Prassi ONES (both of which worked flawlessly until yesterday) and both CD-R and CD-RW Verbatim Super Azo discs, which have never failed me before.
The burner is using the latest firmware and I'm running XP Pro with SP2 and all latest updates/patches.
The computer is spyware and virus-free, and all diagnostics I've tried so far tell me the unit is working properly.
Both software programs fail to simulate or write.
Prassi ONES gives me 'Er: 209 - Disk physical error', while Nero coughs up 'Error Reading Data'.
And to make things worse, when ONES fails it needs to close and locks up the burner tray, and I have to restart Windows to get the disc out.
In desperation, I tried an XP repair install and re-downloaded and applied updates etc etc.
That made no difference.
I've even slowed down the burning speed to the lowest possible in both Nero and ONES. You guessed it - no dice.
This has never happened to me before. The machine and the burner are only a couple of months old, and I have to admit that short of a format and reinstall, I'm basically at my wits' end.
I'll post the Nero error log to see if anyone can offer any suggestions.
Thanx for any anticipated help.
scoopyx.
Nero log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.39 - HA 5 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 5
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-110D>Version: 1.39 - HA 5 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 5
=== Scsi-Device-Map ===
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-110D atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-110D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047856kB)
Free physical memory: 689MB (705960kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.4.2006
CD-ROM (ISO)
4:06:04 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:06:04 PM #2 Text 0 File Burncd.cpp, Line 2948
PIONEER DVD-RW DVR-110D
Buffer underrun protection activated
4:06:04 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
4:06:04 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:06:04 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media
4:06:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 292333 ( 64:59.58)
4:06:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
4:06:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-110D;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A BC, 2: 26 B2 26, 3: FF FF FF (invalid)
4:06:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
4:06:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 292334 (292334) = #292334/64:57.59
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 292334 blocks [PIONEER DVD-RW DVR-110D]
--------------------------------------------------------------
4:06:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-110D] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 716000832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
292334 | lead-out | 1 | 0x41 | 0x00
4:06:30 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:06:30 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
4:06:30 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:06:30 PM #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 10x (1,500 KB/s)
4:06:30 PM #16 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x038D5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x30 0x02
4:06:30 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:06:30 PM #18 Text 0 File Mmc.cpp, Line 17024
StartDAO : CD-Text - Off
4:06:30 PM #19 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
4:06:46 PM #20 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
4:06:46 PM #21 Text 0 File Reader.cpp, Line 385
Exception value: -1
4:06:46 PM #22 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers
4:06:46 PM #23 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 10x (1,500 KB/s)
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 10:00:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
