|
Tried to burn my first ISO on Mini-DVD using Nero6
with Benq 1620.
It failed at the very beginning.
What have I done wrong???
Thanks for your help!
Log from Nero:
==============
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.1
Recorder: <BENQ DVD DD DW1620> Version: B7C9 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <BENQ DVD DD DW1620 >Version: B7C9 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
BENQ DVD DD DW1620 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 85MB (87864kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.4.2006
Burn DVD Image
11:40:48 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
11:40:48 PM #2 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
11:40:48 PM #3 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 713029 (158:27.04, 1392MB)
11:40:48 PM #4 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
11:40:48 PM #5 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: BENQ DVD DD DW1620, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 225
11:40:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:40:48 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 713030 (713030) = #713030/158:27.5
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 713030 blocks [BENQ DVD DD DW1620]
--------------------------------------------------------------
11:40:48 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1460285440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
713030 | lead-out | 1 | 0x00 | 0x41
11:40:48 PM #9 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 4x (5,540 KB/s)
11:40:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:40:48 PM #11 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 4:42,374 (282374ms) -> OK
11:40:48 PM #12 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode
11:40:48 PM #13 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Seamless Link -> ON
11:40:48 PM #14 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes
11:40:48 PM #15 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 80 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:40:48 PM #16 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x0A 0xE1 0x50 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x30 0x00
11:40:48 PM #17 Text 0 File DVDR.cpp, Line 5367
Drive: BENQ DVD DD DW1620
Book Type request: DVD-ROM
Drive doesn't support changing Book Type for DVD-R
11:40:48 PM #18 CDR -1207 File DVDR.cpp, Line 4608
Book Type automatically set to: DVD-ROM
11:40:48 PM #19 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc
11:40:48 PM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once
11:40:48 PM #21 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
11:40:48 PM #22 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 3:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1211 (xpsp2.030422-1633), size=87296 bytes, created 4/23/2003 11:29:54 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
