|
|
|
DVD burning problems
|
|
Member
|
5. May 2006 @ 08:34 |
Link to this message
|
|
I have previously backed up loads of movies usin the tried and tested DVD Shrink/AnyDVD/Nero combination. I have not changed anything as far as i know but i am now getting blank rings on my backups where it looks like chunks have been missed out while burning the discs. I tried using DVD Decrypter to burn the backups as ISO's to make sure the problem was not with Nero but I am still getting the same issue.
I am pretty certain it is not a media issue as i have not changed from my previous backups that worked. I am using Verbatim discs that code out as TY or MCC. They have both worked for a few hundred backups in the past.
Does anyone have any suggestions for me? Is my burner (NEC1300) dying? it has the latest firmware (1.0C) so it is not that either.
thanks
PC Specs: P4 2.6Gb, 1Gb PC3200 RAM, NEC DVD-RW 1300A, DVD-ROM 16x, 80Gb HDD, 250Gb External HDD, XP Pro SP1.
|
|
Advertisement
|
 |
|
|
|
laddyboy
AfterDawn Addict
|
5. May 2006 @ 16:43 |
Link to this message
|
The NEC 1300 is very old and no longer supported with firmware updates. Spend $40 and get a new up-to-date burner.
http://www.newegg.com/ProductSort/Category.asp?Category=10
Are you getting any error messages at all during burning? It seems as though the laser isn't able to burn in some positions. Does every disk have the same unburned areas?
|
Member
|
5. May 2006 @ 21:30 |
Link to this message
|
|
Am happy to get a new burner if that is what the problem is, but i was hoping to make sure it was not a different issue first.
It is not firmware (i dont think) cos i am using the same batch of discs that i have used before with no problems at all. Sometimes i get error messages, other times i get the standard "all finished ok popup", but the blank sectors happen at different points on the disc.
newegg not an option for me (in UK) but i can get replacement for £30 if that is what i need
|
|
dolphin2
Suspended due to non-functional email address
|
5. May 2006 @ 22:33 |
Link to this message
|
|
Are those MCC discs the new 04 ones? I've seen this problem reported before with those.
What is the exact coding of the disc?
This message has been edited since posting. Last time this message was edited on 5. May 2006 @ 22:34
|
Member
|
5. May 2006 @ 22:59 |
Link to this message
|
|
Exact codes are MCC 03RG20 & TYG02.
|
|
dolphin2
Suspended due to non-functional email address
|
5. May 2006 @ 23:33 |
Link to this message
|
OK. Not the same discs.
Do you have a Nero log? Perhaps that would show something?
|
Member
|
6. May 2006 @ 05:52 |
Link to this message
|
Here is the log. Is there anything wrong in it?
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Nikimi atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2500JB-00GVC0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom0
IDE DVD-ROM 16X F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048092kB)
Free physical memory: 624MB (639188kB)
Memory in use : 39
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.5.2006
NeroAPI
08:07:40 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
08:07:40 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
08:07:40 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
08:07:40 #4 Text 0 File Reader.cpp, Line 127
Reader running
08:07:40 #5 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
08:07:40 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
08:07:40 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
08:07:40 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
08:07:40 #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
08:07:40 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1815375 (403:25.00, 3545MB)
08:07:40 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
08:07:40 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
08:07:40 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
08:07:40 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1815376 (1815376) = #1815376/403:25.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1815376 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
08:07:40 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3717890048, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1815376 | lead-out | 1 | 0x41 | 0x00
08:07:41 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
08:07:41 #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
08:07:41 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
08:07:41 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
08:07:41 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
08:07:41 #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode for Multisession
08:07:41 #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
08:07:41 #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: No
08:07:41 #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
08:09:31 #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00B50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0xEB 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
08:09:31 #26 CDR -1135 File Writer.cpp, Line 311
Write error
08:09:31 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
08:09:31 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
08:09:31 #29 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 256927
08:09:31 #30 Phase 133 File APIProgress.cpp, Line 276
Writing short lead-out
08:09:51 #31 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01365400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
08:09:51 #32 CDR -1080 File WriterStatus.cpp, Line 167
Disc not present
_NEC DVD_RW ND-1300A\H1 T0
08:09:51 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
08:09:51 #34 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
08:09:51 #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
08:09:51 #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
|
laddyboy
AfterDawn Addict
|
6. May 2006 @ 07:28 |
Link to this message
|
I think your version of Nero is a little out of date. The newest update to Nero 6 causes problems, but 6.6.0.18 was pretty stable.
You are using high quality media. Unfortunately your burner is not digesting it.
To eliminate Nero as the problem, output an ISO image file from DVD Shrink and burn that with DVD Decrypter. If you already have DVD Decrypter installed, there should already be a Target Output option in DVD Shrink after clicking Backup to "Create an Image File and Burn with DVD Decrypter" which will eliminate an extra step. You can also try ImgBurn instead of DVD Decrypter if you desire. Links to the software if you don't already have it are in my signature below.
Other than trying to locate some older 4X media, I'm not sure what else to try. I note that the TY media was -R. Was the Verbatim media also -R? Do you get the same errors when using +R type media? Do you have any +RW media to experiment with? Does the drive burn CDs correctly and without errors.
We see this quite a bit with these older burners. This is at least the second one today for this model. So much has changed in the past couple of years. This burner dates back to 2003.
|
|
Advertisement
|
|
|
Member
|
6. May 2006 @ 09:12 |
Link to this message
|
I have already tried the DVD Decrypter route and got the same errors. I have been burning with these exact discs (the TY ones in particular this is my last spindle of a box of 8 i bought) and had no problems.
Will try some +R media, and report back
|
|
