|
|
|
Whats happening?
|
|
|
rods48
Newbie
|
21. May 2006 @ 23:43 |
Link to this message
|
|
I received good help from members about a problem i have burning dvd's but after one dvd was ok the next time this error was received after the burning session was terminated
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 7/12/2004 7:13:03 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <LITE-ON DVDRW SOHW-812S> Version: US0S - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-812S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVD-ROM 16X atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-812S E: CDRom0
DVD-ROM 16X F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 73MB (75556kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.5.2006
NeroAPI
4:29:42 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
4:29:49 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
4:29:49 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
4:29:50 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
4:29:50 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-812S running
4:29:50 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:29:50 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:29:51 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:29:52 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
4:29:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
4:29:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
4:29:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-812S, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R02, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
4:29:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:29:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-812S]
--------------------------------------------------------------
4:29:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-812S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
4:29:56 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
4:29:56 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
4:29:56 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
4:29:56 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
4:29:56 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:29:56 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R02
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 52 30 32 03 38 ...RICOHJPNR02.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
4:29:56 PM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
4:52:17 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00BD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1F 0x9D 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
4:52:17 PM #24 CDR -1135 File Writer.cpp, Line 311
Write error
4:52:17 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:52:17 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:52:17 PM #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
4:52:17 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:52:17 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 7/12/2004 7:13:03 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 11:33:44 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDR
IS IT BECAUSE I DONT HAVE ENOUGHT MEMORY AS ONE MEMBER HAS STATED?
|
|
Advertisement
|
|
|
|
|
guyrus
Suspended due to non-functional email address
|
22. May 2006 @ 01:00 |
Link to this message
|
@ rods48: heres a couple of things you can do 1st off
Quote:
CdRomPeripheral : DVD-ROM 16X atapi Port 1 ID 1 DMA: Off
this dma setting needs to be on
Quote:
Physical memory : 255MB (261616kB)
Free physical memory: 73MB (75556kB)
Memory in use : 71 %
your physical memory is a tad low, are you doing other things when you are attempting to burn your projects to disc.If so try and stop it and only have the most neccessary programs running, like clock, and your burning application.Others like the net, music, virus programs can be turned off so that you can make more memory readily available for your burning app and the tasks that it is trying to do.
I dont see your pc stats, can you provide them please
See how you fare, by changing the dma and closing down all apps that arent neccessary.
and before i forget,
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
you are attempting to burn pass what the disc can accomodate.You only have 4.38 gig to play with and you should only be going to 4300 as anything pass this is where the dye (or the outer edge as some people see it) is the most uneven and where a lot of errors can creep into your burns.
later guy
|
Senior Member
|
22. May 2006 @ 01:09 |
Link to this message
|
I forgot there are Nero logs in the Shrink forum..DUH!
Quote:
CdRomPeripheral : DVD-ROM 16X atapi Port 1 ID 1 DMA: Off
That is just the DVD-ROM drive, but still you should turn DMA ON for it. Follow my buddy alkohol's guide to fix it:
http://forums.afterdawn.com/thread_view.cfm/260038
The firmware for the burner is current.
Quote:
Physical memory : 255MB (261616kB)
Free physical memory: 73MB (75556kB)
Memory in use : 71 %
You dont have enough physical, or, free memory. 512mb is the Minimum amount suggested for DVD ripping, and for a good reason. You can try it with less, but you have to have everything perfect and close down all programs not needed for burning, and even then it probably will not burn sucessfully. Memory is cheap and easy to upgrade.
You have the best version of Nero in 6x so no update is needed or recommended.
Quote:
Last address to be written: 2286127 (508:01.52, 4465MB)
You are burning too close to the edge of the disc. Change the target size to Custom 4300 and you wont use the last 1mm of the disc where many problems occur on the cheap media.
Quote:
Disc Manufacturer ID: RICOHJPN, Media Type ID: R02, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
The only DVD media i recommend is Verbatim or Taiyo Yuden. There are only a couple other manufactures i would also use, but when doing troubleshooting, i only suggest using the best. Tys can be found online at http://www.supermediastore.com or locally under Sony, Maxell, or Fuji, if Made in Japan is on the spindle.
Quote:
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
4:52:17 PM #24 CDR -1135 File Writer.cpp, Line 311
Write error
It didnt like your media.
Quote:
4:29:56 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
That is a good speed for a DL burn, but you were not doing one of those. 4x is a better burn speed to use, if your drive supports it, but 8x should be your Max until you get many more sucessful burns.
Quote:
IS IT BECAUSE I DONT HAVE ENOUGHT MEMORY AS ONE MEMBER HAS STATED?
YES!!
That is one of your problems. And that statement makes me wonder why you didnt listen to that member, and/or, are you multi-posting?
When i saw this post, no one had replied to it. You talk of other members helping you, with this problem, and its only me and all the voices in my head here..
Oh well, my advice still applies. No other major problems were seen by me in this log. If you can not afford to update your memory, post back, and i will try to find some memory managment program that will be free, and will free up as much memory as possible.
Look what i found:
http://www.download.com/FreeRAM-XP-Pro/3000-2086_4-10516960.html?...
Just in case you cant go the memory upgrade (which is still the best way to go) 512mb MINIMUM. MINIMUM.. Im not going to say it three times as someone else already said that to you.
Give those things a try and post back here, and only here, if you continue to have problems. I will work with you, but not if you violate forum rules. Im not saying you did, im just putting that out there because of your "other memebers " helping you statement. If you are posting a new thread because the help was long ago, then you are doing the right thing by starting a new thread here. Just chalk it up to paranoia on my part.
Quote:
I DONT HAVE ENOUGHT MEMORY AS ONE MEMBER HAS STATED?
but that part there means someone saw another log of yours and told you about memory. Ok, i guess i am going to have to search here and see what your other problem was.
Die CMC Mag!!!This message has been edited since posting. Last time this message was edited on 22. May 2006 @ 01:12
|
|
guyrus
Suspended due to non-functional email address
|
22. May 2006 @ 01:13 |
Link to this message
|
|
beat you by 9 mins maxburn but then you always do a more thougher reply than me
|
Senior Member
|
22. May 2006 @ 01:27 |
Link to this message
|
@guyrus
When i looked at this post, it was un-answered, but i took some time with it. Im afraid most of our work has already been done as rods48 has another thread not that old, where many ppl have been working on the same problem.
http://forums.afterdawn.com/thread_view.cfm/343080
@rods48
You should have posted your latest burn log in that thread, and myself and guyrus would not have to repeat everything already suggested by many good members in that other thread you opened. 16 may is not that long ago, and when you reply to your thread it moves the thing up so even if it was on page 2 or 3 before it now pops up to the top of the shrink forum.
I feel used.
rods48 Im reporting this as a multi-post. You can explain yourself to the judge, not me. You see, it makes fixing your problem very difficult, besides being against forum rules, as i knew NOTHING about your other post and i wouldnt have wasted my time REPEATING what binkie7 and others already said in the other post.
AND in this post
http://forums.afterdawn.com/thread_view.cfm/327074
How many times do you have to hear the same thing being suggested?? Memory upgrade and media change to TYS OR VERBs was suggested in the 7 april thread. I would not have repeated that if you would stick with one thread. See, now i dont feel like helping you, and you are probably a nice person. You violated forum rules, and made me do extra work that has already been done by others, and ignored by you, for whatever reason.
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 22. May 2006 @ 01:44
|
|
guyrus
Suspended due to non-functional email address
|
22. May 2006 @ 01:38 |
Link to this message
|
|
hey maxburn dont feel jipped it wasnt really wasted, it was a good read ,you know.I keep forgetting to do a complete read of the log files, creaky's going to kill me if he finds out as he taught me better than that,.................so mums the word ok
|
|
rods48
Newbie
|
22. May 2006 @ 01:48 |
Link to this message
|
|
Sorry to put members to so much trouble in trying to solve my problems as stated i am a novice when it comes to computers and i dont no where to turn to when i get a problem.i will get more ram and hpo that helps.
|
Senior Member
|
22. May 2006 @ 01:57 |
Link to this message
|
@guyrus
As you know, multi-posts are against forum rules, and the reason for me why its a good rule is what just happened to us. Yes, it is good to look at any Nero log and report back what we see as wrong, but it is WASTED if the person is not listening to us, or has heard this before and doesnt want to do the suggestions for whatever reason.
My time could have been better spent on someone who hasnt been helped before, and will listen to suggestions. These types of posts bring up a red flag for me.. PROBLEM POSTER.. I avoid those types as things usually get ugly when ppl violate rules, or wont listen to advice.
Keep up the good work. You caught the 3 biggies in that log and didnt miss anything other than the media. I took longer looking at it, or you would have seen that one too, if creaky taught you. :)
Now im going to have to burn some just to chill out. I shouldnt let things like this get to me, but it does sometimes. All in a days work at A.D.
Quote:
Sorry to put members to so much trouble in trying to solve my problems as stated i am a novice when it comes to computers and i dont no where to turn to when i get a problem.
@rods48
You came to the right place, but please read the forum rules about multi-posting. We all want to help you, but multi-posting makes our job of helping you much harder for us.
Start a thread like you did, and keep posting in that thread until all is fixed for you. That is the way it is supposed to work, and we wouldnt have to re-invent the wheel each time you have a problem.
Im not mad, just upset. Ill get over it.
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 22. May 2006 @ 02:05
|
|
guyrus
Suspended due to non-functional email address
|
22. May 2006 @ 02:16 |
Link to this message
|
|
@ maxburn, you know the newbies arent going to change over night but with a little guidence and calm resovle on the higher ranks it might eventuate.Isnt this what dela had in mind .Patience and persistence are the keys here
Go have a beer on me
lata
guy
|
Senior Member
|
22. May 2006 @ 02:34 |
Link to this message
|
Wise words there guyrus, but when rods48 opened up a thread on 7 April 2006, and was told to change media to Verbs or Tys, upgrade memory to 512mb min, and to fix DMA.
http://forums.afterdawn.com/thread_view.cfm/327074
Doesnt do that, then opens up this thread:
http://forums.afterdawn.com/thread_view.cfm/343080
and gets the same answers, fixes none of the major problems again, and then posts here in this thread asking for help. I feel like my time and effort is wasted. If rods48 would have followed the advice given back in april this thread would not be here. Nor would the other one. Its that simple. If someone is unwilling, or unable to follow advice, no matter how nice the person is, we cant help them.
Die CMC Mag!!!
|
|
guyrus
Suspended due to non-functional email address
|
22. May 2006 @ 02:43 |
Link to this message
|
i'm far from wise these days my friend, but you have to realise that some people take longer to get it that we are trying to help them.How do we not know that rod48 was just getting confused with all the help and not understanding all of it,was scared to ask for more help, so he opens this thread hoping to get a different set of ideas.Although this is the wrong way to get the answer as it is a multipost but as he states that he is a novice, dont we or should i say arent we obliged to give him the benefit of the doubt this time.
Quote:
Sorry to put members to so much trouble in trying to solve my problems as stated i am a novice when it comes to computers and i dont no where to turn to when i get a problem.i will get more ram and hpo that helps.
I will this time and probably the next as long as it takes for my penance.......lol.So how was the beer and have ye cooled down yet, mayhap you need a laugh like grandpa's friday funnies
lata man
guy
|
Senior Member
|
22. May 2006 @ 03:26 |
Link to this message
|
@guyrus
You have much more patience than me. I didnt have a beer, but i did find some nice herbs to mellow things out. Ja man, we be jamin now.
I try to give novice and newbies much slack and forgiveness, as we were all that at one time or another. But someone who doesnt listen will not be helped. If the instructions for fixing things were not clear, then rods48 should have said " i dont know what you mean when you say fix DMA" If following alkohols DMA guide didnt work, or was too complicated, then i, or any other memeber would have bent over backwards to explain it, or linked to another DMA guide. rods48 gave no feedback other than to start another thread saying help me, getting the exact same help,(by others) not following it, and starting another thread saying help me (this is where we come in). Is it just me that finds this very annoying???
Confused, scared, or whatever, i cant help someone who does not follow advice, or give feedback as to the progess made. I cant do it, and neither can you. They have to help themselves. Report back with progress, or problems. We will be as gentle and un-threatening as it takes to help, and will take instructions down to a very low IQ level if need be. Hopefully without coming across as superior or condecending in the process. I know nothing of rods48 IQ or age, and it doesnt matter what those numbers are as long as rods48 can, or will follow advice. It is also good advice that has been given and repeated by many ppl for over a month. The message is going out, but something is wrong on the other end. Message sent fine, acknowledged on other end, but not acted on.
I hope you can see where i am coming from on this. If i would have seen this same problem in a thread, with Gwendolin, and Binkie7 replying to the post, i wouldnt reply to it, unless i saw something they missed. And that doesnt happen very often with those two.
A novice that knows how to turn on a computer, type, read, rip a dvd, or at least try to, operate multiple software programs, and open up muliple threads in a forum, is smart enough to follow good advice. Smart enough, but maybe not wise enough. Ok, i will stop talking about this. I seem to have completely missed sleep for this day/night and i have many things to do today, so no sleep for the wicked or weary. Sleep is over-rated anyway.
***edit***
@guyrus
Even when i get upset, i will still work with them. Today im not upset.
This thread is closed, but the original one is open and that is where we can continue working this problem:
http://forums.afterdawn.com/thread_view.cfm/327074
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 23. May 2006 @ 10:24
|
|
guyrus
Suspended due to non-functional email address
|
22. May 2006 @ 03:47 |
Link to this message
|
|
gwen and karen have lots of patience, trust me on that score.I use to be arrogant when dealing with the same questions day in and day out with out the people actually attempting to try what we suggest.But now i just see it as a challenge to see if i can stay cool, calm and try and get a solution.If not it's time to get the big guns involved , like creaky,neph,ddp, maxburn, binkie7 , gwen, loco etc
some people need a little more help than others, but hey 'he said he'd look into getting more ram', and try to change the dma.
Progress has begun ,now we just need to nurture it a bit more and then we have the makings of a productive member of AD.Stop being so stern, we know you have a heart of gold, maxburn.we know better than any one.Let see how it progresses and in a couple of days if i havent seen a reply i'll pm him to see if he requires more guidence
|
|
Advertisement
|
|
|
|
ddp
Moderator
|
22. May 2006 @ 07:56 |
Link to this message
|
|
closed due to multi-posting
|
|
