|
|
|
need help with burn errors
|
|
|
Yukanuba
Newbie
|
28. June 2006 @ 10:08 |
Link to this message
|
Hello,
Can someone please help me correct burn errors with Nero or lead me in the right direction? I have been running a movie in Nero Vision and when it starts to burn I get an error about a minute later. I have already removed the old version of Nero, did a clean up, and reinstalled Nero 7.0.8.2 and still having trouble. Any suggestions? Thank you in advance for your time.
|
Moderator
|
29. June 2006 @ 12:26 |
Link to this message
|
Hi Yukanuba
Welcome to ad
What error are you receiving?
You can also post your last Nero log and we can take a look at what's going on.
They can be found at: program files>Nero>Nero 7>Core>NeroHistory.
Just be sure to edit out your serial # - they begin w/ 1A, 1C or 5C.
|
|
Yukanuba
Newbie
|
29. June 2006 @ 14:37 |
Link to this message
|
I hope I did this right.....seems like an awful lot. Once again, Thank you in advanced.....Here it is.....
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 119MB (122176kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2006
UDF/ISO compilation
1:09:11 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
1:09:11 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
1:09:11 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:09:11 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
1:09:11 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
1:09:11 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:09:11 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: NU DVDRW DDW-061 running
1:09:14 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
1:09:14 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
1:09:14 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
1:09:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2267951 (503:59.26, 4429MB)
1:09:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
1:09:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061, Media type: DVD+R
1:09:28 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
1:09:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
--------------------------------------------------------------
1:09:29 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2267952 | lead-out | 1 | 0x41 | 0x00
1:09:29 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:09:29 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
1:09:29 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
1:09:29 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
1:09:29 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)
1:09:29 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:09:29 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x04810200: Len x804
1:09:29 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x04872c00: Len x2
1:09:29 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
1:09:36 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x03400000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1:09:36 PM #27 CDR -1135 File Writer.cpp, Line 302
Write error
F: NU DVDRW DDW-061
1:09:36 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:09:37 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:09:37 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03
1:09:37 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
1:09:37 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
1:09:37 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x04872c00: Len x2
1:09:37 PM #34 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 5MB (5608kB)
Memory in use : 98
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2006
UDF/ISO compilation
1:10:06 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
1:10:06 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
1:10:06 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:10:06 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
1:10:06 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
1:10:06 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:10:06 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: NU DVDRW DDW-061 running
1:10:06 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
1:10:06 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
1:10:06 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
1:10:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2267951 (503:59.26, 4429MB)
1:10:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
1:10:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061, Media type: DVD+R
1:10:06 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:10:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
--------------------------------------------------------------
1:10:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2267952 | lead-out | 1 | 0x41 | 0x00
1:10:07 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:10:07 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
1:10:07 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
1:10:07 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
1:10:07 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 6x (8,310 KB/s)
1:10:07 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:10:07 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x038e3600: Len x804
1:10:07 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x04872c00: Len x2
1:10:07 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
1:10:23 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x03400000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1:10:23 PM #27 CDR -1135 File Writer.cpp, Line 302
Write error
F: NU DVDRW DDW-061
1:10:23 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:10:25 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:10:25 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03
1:10:25 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
1:10:26 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
1:10:26 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x04872c00: Len x2
1:10:26 PM #34 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 193MB (198108kB)
Memory in use : 59
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2006
UDF/ISO compilation
1:11:51 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
1:11:51 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
1:11:51 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:11:51 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
1:11:52 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
1:11:52 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:11:52 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: NU DVDRW DDW-061 running
1:11:52 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
1:11:52 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
1:11:52 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
1:11:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2267951 (503:59.26, 4429MB)
1:11:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
1:11:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061, Media type: DVD+R
1:11:52 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:11:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
--------------------------------------------------------------
1:11:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2267952 | lead-out | 1 | 0x41 | 0x00
1:11:52 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:11:52 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
1:11:52 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
1:11:52 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
1:11:52 PM #21 Phase 28 File dlgbrnst.cpp, Line 1724
Speed measurement started
1:11:52 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:13:43 PM #23 Text 0 File WriterStatus.cpp, Line 116
<F: NU DVDRW DDW-061> start writing Lead-Out at LBA 2267952 (229B30h), length 0 blocks
1:13:43 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:13:43 PM #25 Phase 29 File dlgbrnst.cpp, Line 1673
Speed measurement completed: 30.2x (41,762 KB/s)
1:13:43 PM #26 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 6x (8,310 KB/s)
1:13:43 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:13:43 PM #28 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x038e7200: Len x804
1:13:43 PM #29 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x03887000: Len x2
1:13:43 PM #30 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
1:13:51 PM #31 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 A0 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 21
Buffer x03430000: Len x10000
0x00 00 01 BA 44 00 44 D6 DD 01 01 89 C3 F8 00 00
0x01 C0 04 88 81 80 05 21 00 11 57 25 2E D1 CD 27
0xEB 38 9D 52 E3 A9 17 4E 71 94 E2 AE 8A E8 92 42
1:13:51 PM #32 CDR -1064 File Writer.cpp, Line 302
Invalid block address
F: NU DVDRW DDW-061
1:13:51 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:13:51 PM #34 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:13:53 PM #35 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
1:13:53 PM #36 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
1:13:53 PM #37 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x03887000: Len x2
1:13:53 PM #38 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 168MB (172844kB)
Memory in use : 64
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2006
CueSheet
3:24:05 PM #1 Text 0 File Burncd.cpp, Line 3007
NU DVDRW DDW-061
Seamless Link activated
3:24:05 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
3:24:05 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
3:24:05 PM #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using CD-R/RW media
3:24:13 PM #5 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user
3:24:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 362963 ( 80:41.38)
3:24:13 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
3:24:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061
Medium not present
3:24:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 89MB (91652kB)
Memory in use : 81
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2006
UDF/ISO compilation
6:36:26 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
6:36:26 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
6:36:26 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:36:26 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
6:36:26 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
6:36:26 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:36:26 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: NU DVDRW DDW-061 running
6:36:26 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
6:36:26 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
6:36:26 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
6:37:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2267951 (503:59.26, 4429MB)
6:37:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
6:37:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061, Media type: DVD+R
6:37:04 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: CD-R. Medium required by compilation: DVD+R/RW.)
6:37:04 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
--------------------------------------------------------------
6:37:04 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2267952 | lead-out | 1 | 0x41 | 0x00
6:37:04 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:37:05 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
6:37:05 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
6:37:05 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
6:37:05 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2.4x (3,324 KB/s)
6:37:05 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:37:05 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x049a4600: Len x804
6:37:05 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x003d5200: Len x2
6:37:05 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:37:07 PM #26 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 21
Buffer x03390000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6:37:07 PM #27 CDR -1064 File Writer.cpp, Line 302
Invalid block address
F: NU DVDRW DDW-061
6:37:07 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:37:07 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:37:07 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03
6:37:07 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
6:37:07 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
6:37:07 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x003d5200: Len x2
6:37:07 PM #34 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 89MB (91816kB)
Memory in use : 81
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2006
UDF/ISO compilation
6:37:29 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
6:37:30 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
6:37:30 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:37:30 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
6:37:30 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
6:37:30 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:37:30 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: NU DVDRW DDW-061 running
6:37:30 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
6:37:30 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
6:37:30 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
6:37:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2267951 (503:59.26, 4429MB)
6:37:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
6:37:46 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061, Media type: DVD+R
6:37:46 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
6:37:46 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
--------------------------------------------------------------
6:37:46 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2267952 | lead-out | 1 | 0x41 | 0x00
6:37:46 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:37:46 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
6:37:46 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
6:37:46 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
6:37:46 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2.4x (3,324 KB/s)
6:37:46 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:37:46 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x03875600: Len x804
6:37:46 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x003d5200: Len x2
6:37:46 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:37:47 PM #26 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 21
Buffer x033a0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6:37:47 PM #27 CDR -1064 File Writer.cpp, Line 302
Invalid block address
F: NU DVDRW DDW-061
6:37:47 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:37:47 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:37:47 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03
6:37:47 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
6:37:47 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
6:37:47 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x003d5200: Len x2
6:37:47 PM #34 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 150MB (153932kB)
Memory in use : 68
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2006
CueSheet
6:43:27 PM #1 Text 0 File Burncd.cpp, Line 3007
NU DVDRW DDW-061
Seamless Link activated
6:43:27 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
6:43:27 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
6:43:27 PM #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using CD-R/RW media
6:43:33 PM #5 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user
6:43:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 362963 ( 80:41.38)
6:43:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
6:43:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061
Medium not present
6:43:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 83MB (85436kB)
Memory in use : 82
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.6.2006
UDF/ISO compilation
12:01:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
12:01:42 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
12:01:42 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:01:42 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
12:01:42 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
12:01:42 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
12:01:42 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: NU DVDRW DDW-061 running
12:01:42 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:01:42 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:01:42 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
12:01:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2267951 (503:59.26, 4429MB)
12:01:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
12:01:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061, Media type: DVD+R
12:01:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:01:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
--------------------------------------------------------------
12:01:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2267952 | lead-out | 1 | 0x41 | 0x00
12:01:43 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:01:43 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
12:01:43 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
12:01:43 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
12:01:43 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 6x (8,310 KB/s)
12:01:43 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:01:43 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x048f9e00: Len x804
12:01:43 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x003d5200: Len x2
12:01:43 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
12:02:06 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 45 40 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x04ce0000: Len x10000
0x00 00 01 BA 44 07 E6 B6 DD 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 7A 6E A4 6F D5 8E 91 90 A1
0x4B 69 AD AA CA 25 8A 63 EA 5F 25 55 57 1D 34 BE
12:02:06 PM #27 CDR -1135 File Writer.cpp, Line 302
Write error
F: NU DVDRW DDW-061
12:02:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:02:06 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:02:19 PM #30 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
12:02:19 PM #31 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
12:02:19 PM #32 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x003d5200: Len x2
12:02:19 PM #33 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 150MB (154468kB)
Memory in use : 68
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.6.2006
UDF/ISO compilation
12:02:40 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
12:02:41 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
12:02:41 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:02:41 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
12:02:41 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
12:02:41 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
12:02:41 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:02:41 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:02:41 PM #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
12:03:08 PM #10 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user
12:03:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
12:03:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061, Media type: DVD+R
12:03:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
NU DVDRW DDW-061 F: CDRom1
HJ1311Z NNK123Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 151MB (155176kB)
Memory in use : 68
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.6.2006
UDF/ISO compilation
12:03:14 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
12:03:15 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
12:03:15 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:03:15 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
12:03:15 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 68608KB of Memory
12:03:15 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
12:03:15 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:03:15 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:03:15 PM #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
12:04:04 PM #10 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user
12:04:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
12:04:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: NU DVDRW DDW-061, Media type: DVD+R
12:04:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
|
|
Advertisement
|
|
|
Moderator
|
29. June 2006 @ 15:29 |
Link to this message
|
Sorry I should have told you the logs are separated by this:
====== *** Nero Burning ROM, History File *** ======
But scanning thru all of them the burning errors remain pretty consistent for the DVD's & CD's you've tried.
Another thing is your memory in use in some logs gets quite low so whening encoding & burning no multitasking and shut down unnecessary processes.
All the logs also show you're using 7.0 not 7.0.8.2. The last log is from 6/27. Have you updated since then?
Quote:
Recorder: <NU DVDRW DDW-061> Version: BX03
Your firmware is a bit behind the latest is BX32. This will help your drive with the write/read strategies of media.
Here's a link:
http://forum.rpc1.org/dl_firmware.php?download_id=1690Quote:
Recorder: NU DVDRW DDW-061, Media type: DVD+R
Your drive only see the media as +r. A firmware may help this but the last update on this drive was 5/2004.
What brand of media are you using and what's the rated burn speed? exp. like Verbatim 8x
Quote:
CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
Turn DMA mode back on for this drive. Here's a link:
http://forums.afterdawn.com/thread_view.cfm/260038
Since the max burn speed on this drive is 6x - I would try 4x or lower. I see you've tried different ones w/o success but hopefully the firmware may take care of burn errors.
|
|
