User User name Password  
   
Thursday 31.7.2025 / 18:31
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > archived forums > xbox - general discussion > green and red flashing???? is this a sign of death
Show topics
 
Forums
Forums
Green and Red Flashing???? Is this a sign of death
  Jump to:
 
Posted Message
TallMagZ
Newbie
_
29. May 2003 @ 14:40 _ Link to this message    Send private message to this user   
Matrix chip..Ver 1.0 box installed nothing but three boot atemps but once it stays running get nothing but red and green flashing at eject read many different post and no direct answer to cause ??? Any help would be greatly app...MAGZ
Advertisement
_
__
pong3
Suspended due to non-functional email address
_
29. May 2003 @ 16:30 _ Link to this message    Send private message to this user   
whats up. I had the same problem, check out the forum that says red/green flashing and there are a few things you can check out. I still haven't fixed mine though.
TallMagZ
Newbie
_
29. May 2003 @ 16:32 _ Link to this message    Send private message to this user   
Read the form nothing worked maybe something will show up
TallMagZ
Newbie
_
29. May 2003 @ 17:34 _ Link to this message    Send private message to this user   
pong3 how long you had this problem? and if you take the chip out it still does the same?
Cradl3
Junior Member
_
1. July 2003 @ 19:40 _ Link to this message    Send private message to this user   
Im having the same conflict.
StatikOne
Member
_
1. July 2003 @ 21:00 _ Link to this message    Send private message to this user   
3 people!!!
This makes me not want to order a Matrix mod now, unless solutions are found.
ModMaster
Junior Member
_
1. July 2003 @ 21:48 _ Link to this message    Send private message to this user   
Red and green flashing after modding usually means that the bios is not being detected properly which points to one of the LPC points not making contact. However the XBOX will flash red and green for many reason such as the fan not being plugged in etc. Try removing the mod and see if it still flashes. If it works then you know it's the mod is not seating properly. You may have to fill the LPC holes with solder if they are not filled already to get a good contact.
Dank
Member
_
1. July 2003 @ 22:09 _ Link to this message    Send private message to this user   
If I get 3 reboots you know hat that means??? it means thta the D0 point isn't touching properly most of the time so try and realign the chip
ModMaster
Junior Member
_
1. July 2003 @ 22:31 _ Link to this message    Send private message to this user   
But the d0 point is only to disable the xbox bios. If it's not touching properly then the bios won't be disabled and the xbox should boot as normal. Red green flashing in my experience usually means d0 point is connected therefore BIOS is disabled but when it looks for the bios from the chip it cannot be read because of a poor contact on the LPC hence the flashing.
pong3
Suspended due to non-functional email address
_
2. July 2003 @ 08:19 _ Link to this message    Send private message to this user   
What if it still flashes red/green when I take the chip out?
Cradl3
Junior Member
_
2. July 2003 @ 08:57 _ Link to this message    Send private message to this user   
my Xbox continues to blink after I remove the Matrix Chip and I have verified to hookups. your explination sounds about right about the d0 but what do I do if i dont have a solder iron or anything experience using one?

Im wanting to get back onto my primary focus.
Troubleshooting has been 90% of this project on my end.
Dank
Member
_
2. July 2003 @ 09:37 _ Link to this message    Send private message to this user   
did you back up your C and E drives?
Cradl3
Junior Member
_
2. July 2003 @ 09:48 _ Link to this message    Send private message to this user   
i never got the chance to, I do anything to it. I have never even seen the boot screen.
ModMaster
Junior Member
_
2. July 2003 @ 11:17 _ Link to this message    Send private message to this user   
This is crazy. You're the 3rd person on here I've seen so far who has put a Matrix in without touching a soldering iron then got a red/green flash and then taken the chip out but still got a flash. Are you 100% sure about all the connections? Are they in firmly? Do you think you may have accidentally knocked or damaged a small part on the motherboard?
Cradl3
Junior Member
_
2. July 2003 @ 13:28 _ Link to this message    Send private message to this user   
Yes im absolutely sure everything is reconnected and secure. I manufacture PC's and other devices on the side and Im fully aware of the existing configuration. yet and still it continues to not boot. I have not damaged anything as far as I can see on the board.
Advertisement
_
__
 
_
dexpl0it
Newbie
_
31. December 2003 @ 05:59 _ Link to this message    Send private message to this user   
im also getting this same problem. Havnt found a fix for it. Got a mod chip, installed it, xbox rebooted 3 times, then red/green flashing. take out mod chip and stil lget red/green flashing....

all connections fine

any ideas?
afterdawn.com > forums > archived forums > xbox - general discussion > green and red flashing???? is this a sign of death
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork