|
|
|
problem burning with everyhting
|
|
|
maskeeta
Junior Member
|
12. July 2006 @ 16:42 |
Link to this message
|
I have burned over 300 dvds with my currents dvd burner. but i havent been able to succesfully burn a dvd in a few weeks. ive tried using dvddecrypt, Nero and clone dvd to burn , and nothing is successful. i was using verbatim 16x and i just got verbatim 8x and that still doesnt work. i burn at 2.4X always/ i use AnyDVD with dvdshirnk to rip to my hard drive. then use one of the above software to burn it. im starting to think its my acutally burner but im not sure because it burns cds perfectly. any tips/ideas of what could be wrong. here is my latest Nero log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <TDK DVDRW840G> Version: 1.11 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD4000KD-00NAB0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW840G atapi Port 3 ID 1 DMA: On
CdRomPeripheral : QC0568K BOH677D 2.0B vaxscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
TDK DVDRW840G E: CDRom1
QC0568K BOH677D G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 143MB (146772kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.7.2006
Burn DVD Image
8:11:00 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
8:11:00 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:11:00 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: TDK DVDRW840G running
8:11:00 PM #4 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
8:11:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202042 (489:20.42, 4300MB)
8:11:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
8:11:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TDK DVDRW840G, Media type: DVD+R
8:11:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:11:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2202043 (2202043) = #2202043/489:20.43
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202043 blocks [E: TDK DVDRW840G]
--------------------------------------------------------------
8:11:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TDK DVDRW840G] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509784064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202043 | lead-out | 1 | 0x41 | 0x00
8:11:00 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:11:00 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:11:00 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
8:11:00 PM #14 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
8:11:00 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
8:11:00 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
8:11:00 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:11:00 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x05415200: Len x804
8:11:00 PM #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
8:16:22 PM #20 SPTI -1135 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x07
CDB Data: 0x2A 00 00 07 5D 80 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 0A 5D 80 0A 00 00 00 00 0C 07
Buffer x05350000: Len x10000
0x00 00 01 BA 44 45 74 30 74 AB 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 0A 96 8C 24 D3 2E CC 23 5D
0x33 8B 38 A1 10 50 83 28 D8 75 C9 A2 85 30 B5 13
8:16:22 PM #21 CDR -1135 File Writer.cpp, Line 302
Write error
E: TDK DVDRW840G
8:16:22 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:16:22 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:16:29 PM #24 SPTI -1093 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF0 00 03 FF FF EE B0 0A 00 00 00 00 02
8:17:00 PM #25 CDR -1093 File WriterStatus.cpp, Line 167
No seek complete
E: TDK DVDRW840G
8:17:00 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
8:17:00 PM #27 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/20/2004 2:37:14 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Moderator
|
12. July 2006 @ 17:35 |
Link to this message
|
Hi maskeeta
What's changed (pc or media wise) since the last time you were able to burn?
Most of the errors in your log No seek complete & write error
can be media related. Your firmware is up to date & your using good media but your drive is not recognizing it. It only sees that it Media type: DVD+R . Your log is missing the manufacturer & media info.
To try and rule out the burner I would try some different media like made in Japan only Fuji or Sony. Get no higher than 8x.
You might also want to try cleaning the lens w/ a dvd lens cleaner.
Check your drives connections too - make sure all are secure.
Quote:
Physical memory : 510MB
Free physical memory: 143MB
Memory in use : 71 %
Good total ram - 71% in use so try and free up memory.
May not help this problem - but better to get as much free as possible.
|
|
maskeeta
Junior Member
|
12. July 2006 @ 18:14 |
Link to this message
|
|
thanks. not realy sure what has changed since it stopped burning. im gonna try to clean the lens and see what happens. i wonder if i should try re0nstalling the dvd drive/hardware. i guess after burning 300+ its gonna take its toll. im hoping its a minor issue though. havent been able to figure it out though
|
Moderator
|
12. July 2006 @ 18:28 |
Link to this message
|
Depending on the drive - 300 is a fairly low usage. Though there are lemons w/ any brand.
I'd do the lens cleaning bit.
Check all connections to the drive - make sure they are secure - power and ide connectors. May even want to try another power connector.
Runs a registry cleaner too if you haven't recently. Try ccleaner:
http://www.ccleaner.com/
Do a disc cleanup and system defrag (may not be part of the problem - but good to do anyhow)
You can do the uninstall too - Uninstall the drive(tdk) in device manager - reboot then let windows do it's thing and reintall.
Then try different media.
Keep us posted on your outcome - good, bad or otherwise!
|
|
maskeeta
Junior Member
|
12. July 2006 @ 19:32 |
Link to this message
|
|
thank you
you think its wierd though that cd-rs burn fine?
|
Moderator
|
13. July 2006 @ 10:37 |
Link to this message
|
|
@maskeeta
Just my little understanding is that there are 2 lasers - one for cd's and one for dvd's. The cd one could be fine.
|
|
maskeeta
Junior Member
|
13. July 2006 @ 15:58 |
Link to this message
|
|
how do i get to teh device manager(sorry). i tried cleanign the lens. ccleaner, freeing up memory, checkming the power/ide cables.
i wanna try to uninstall and install the drivee. do i need the tdk disc for that or will windows do it automatically?
|
Moderator
|
13. July 2006 @ 16:21 |
Link to this message
|
To get to device manager just right click on 'my computer' then pick properties>hardware>device manager.
Here's a guide for DMA and IDE controllers but it also goes into uninstalling the drive. You might want to try uninstalling the ide and then drive.
No disc is needed - windows should reinstall on rebooting.
http://forums.afterdawn.com/thread_view.cfm/260038
Did you try another power connection?
|
|
maskeeta
Junior Member
|
13. July 2006 @ 20:51 |
Link to this message
|
|
tried that , my last shot is to try the other power connection
|
Moderator
|
14. July 2006 @ 09:19 |
Link to this message
|
|
Check that and post back on how that goes - good, bad or otherwise!
Hopefully that will do the trick.
|
|
maskeeta
Junior Member
|
15. July 2006 @ 11:10 |
Link to this message
|
|
just tried changing power connectors. and still got a failure.
|
AfterDawn Addict
|
15. July 2006 @ 11:23 |
Link to this message
|
|
if ye have another computer with burning software ,install the drive ye do not need to install the burner software as windows will see the drive..now test the dvd burn thats the best way to check if ye burner is bad...
|
|
maskeeta
Junior Member
|
15. July 2006 @ 11:33 |
Link to this message
|
|
im actualyy gonna run up to Costco now and pick up a new burner, they have a grandfatehr return policy so ill have no problem returning it. should i go internal or external, what are the good brands.
|
Moderator
|
15. July 2006 @ 12:17 |
Link to this message
|
|
Hi maskeeta
Ireland gave a good point - might want to check in another pc 1st.
Your ide cable could be faulty too.
Other thing to try:
Disconnect the JLMS (LiteON DVD rom?) from the master connection - put the TDK in it's place (make sure you change the jumper pin on the back of the drive to master also)
Now see what happens. If all is good than put the other drive on the secondary connection (again make sure the jumper pin is set to slave).
I'd check that & ireland's suggestion 1st b/4 buying a new one.
|
|
maskeeta
Junior Member
|
17. July 2006 @ 16:14 |
Link to this message
|
|
the trouble is finding another PC.
im gonna try the other idea later on
|
Moderator
|
17. July 2006 @ 17:07 |
Link to this message
|
|
Try that and see how it goes.
Sometimes replacing the drive w/ a new one doesn't fix the problem - not saying it won't in this case - but best to try and rule out all possibilities.
Keep us posted
|
|
maskeeta
Junior Member
|
19. July 2006 @ 17:03 |
Link to this message
|
just tried switching the drives, the burner in the master and the dvd-rom in slave, they were both on cabl eselct before, got an error again. for some reason i feel its not the burner, i mean i can burner cds fine.
well heres my Nero log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <TDK DVDRW840G> Version: 1.11 - HA 1 TA 6 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 1 TA 4 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD4000KD-00NAB0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW840G atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On
CdRomPeripheral : QC0568K BOH677D 2.0B vaxscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
TDK DVDRW840G D: CDRom6
JLMS XJ-HD166S E: CDRom4
QC0568K BOH677D G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 204MB (208984kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.7.2006
Burn DVD Image
8:38:10 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
8:38:10 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:38:10 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: TDK DVDRW840G running
8:38:11 PM #4 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
8:38:11 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202049 (489:20.49, 4300MB)
8:38:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
8:38:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TDK DVDRW840G, Media type: DVD+R
8:38:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:38:11 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2202050 (2202050) = #2202050/489:20.50
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202050 blocks [D: TDK DVDRW840G]
--------------------------------------------------------------
8:38:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TDK DVDRW840G] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509798400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202050 | lead-out | 1 | 0x41 | 0x00
8:38:11 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:38:11 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:38:11 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
8:38:11 PM #14 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
8:38:11 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
8:38:11 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
8:38:11 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:38:11 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 290
D: CdRom6: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x05422400: Len x804
8:38:11 PM #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
8:54:33 PM #20 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom6: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x07
CDB Data: 0x2A 00 00 18 0D 40 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 1B 0D 40 0A 00 00 00 00 0C 07
Buffer x04d70000: Len x10000
0x00 00 01 BA 44 B5 94 E1 94 6B 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 FD CD 43 84 A0 D5 C3 E1 B9
0xE8 70 68 30 A4 86 12 64 A7 AE C2 14 7C 94 90 C0
8:54:33 PM #21 CDR -1135 File Writer.cpp, Line 302
Write error
D: TDK DVDRW840G
8:54:33 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:54:33 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:54:39 PM #24 SPTI -1093 File SCSIPassThrough.cpp, Line 290
D: CdRom6: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF0 00 03 FF FF EE B0 0A 00 00 00 00 02
8:55:20 PM #25 CDR -1093 File WriterStatus.cpp, Line 167
No seek complete
D: TDK DVDRW840G
8:55:20 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
8:55:20 PM #27 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/20/2004 2:37:14 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
19. July 2006 @ 17:42 |
Link to this message
|
Quote:
8:55:20 PM #25 CDR -1093 File WriterStatus.cpp, Line 167
No seek complete
Quote:
18. Why do I get a 'No seek complete' error message?
This error can be caused by the following:
Old firmware on the recorder - Please contact the manufacturer of the recorder in order to get the latest firmware for your recorder. An old firmware can cause compatibility problems as well as burn failures. Firmware upgrades for your recorder are provided only by the manufacturer of your recorder. All firmware upgrades and support for upgrading your recorder?s firmware must be provided by either the recorder manufacturer or the OEM you purchased your recorder bundle from. We can not assist you in this, sorry.
For example if you have a Yamaha Recorder, you would go to the www.yamaha.com website in order to obtain the latest firmware for your recorder and instructions on how to upgrade your recorder?s firmware. Same goes for all other recorder manufacturers, such as Sony, Pioneer, LG, etc...
To determine what kind of recorder you have, assuming you do not know for sure, you can use our Nero Info Tool to obtain this information. To locate the Nero Info Tool, follow the steps below.
For Nero Burning ROM 6 or Nero Express 6 go to:
'Start -> All Programs -> Nero -> Nero Toolkit -> Nero InfoTool'
For Nero Burning Rom 5.5 or Nero Express 5.5 go to:
'Start -> All Programs -> Ahead Nero -> Nero Toolkit -> Nero InfoTool'
Once Nero Info Tool is launched, make sure your recorder is selected in the top left of the window. Use the drop-down box located there to select your recorder or any recorder. Once selected, it displays the manufacturer as well as the model of the recorder you have. Be sure to make a note of this. Also, once you have your recorder selected, you can click on the 'DRIVE' tab and in the top right of this window you will see the current firmware version (among other information) you have on your recorder. Compare this version with the latest firmware provided by the manufacturer of your recorder and upgrade if available.
Legal disclaimer:
"Nero AG is not liable for firmware updates as these updates are not offered by Nero AG. All updates are performed at one?s own risk. Nero AG will not be liable for the legality of the firmware."
Poor media - Try more than one brand of media. For example: TDK, Verbatim, Imation, Yamaha, HP, etc.
Poor IDE cable or incorrect cable - For higher end recorders these days if you use the 40pin cable you can have all sorts of unusual symptoms. It would be best to use an ATA-133 80 wire cable.
Driver conflicts - If you have or had another CD recording software installed on your system, its drivers could be conflicting with our software. This is rare for this symptom, but it does occur. Uninstall any other recording software and make sure all its drivers have been removed with it. Then reinstall Nero and make sure to use the latest version we have posted on our website.
Defective recorder - The optical head on your recorder may need cleaning or servicing. Or it's possible the circuit board on your recorder has an open coil or blown diode or resistor. Any of these could cause the error. Only solution would be to send the drive in for service to the recorder manufacturer.
http://ww2.nero.com/nero6/enu/FAQs_Products_NeroBurningROM_Error-...
|
|
maskeeta
Junior Member
|
20. July 2006 @ 03:34 |
Link to this message
|
|
i got roxio zap , but when i open it is say "would you like to zap easy cd dvd 4 or 5" i bleeive the one i have is 6. and when i try to uninstall it thorugh add/remove, it calls for a disc and then comes up with and error. its been doing that for awhile
|
Moderator
|
20. July 2006 @ 18:58 |
Link to this message
|
|
@maskeeta
What program of Roxio do you have installed? Like what is it listed as in add/remove programs?
When you say it been doing that for awhile - I take it you've tried to uninstall before?
|
|
maskeeta
Junior Member
|
21. July 2006 @ 13:30 |
Link to this message
|
|
Easy CD & DVD Creator 6.
yeah, when my problem first started i wen ton here and they suggested i use roxio zap. and i did and it never completly uninstalled
|
Senior Member
|
21. July 2006 @ 17:00 |
Link to this message
|
|
@ maskeeta,
i believe, if u have esay cd/dvd 6, then u have to remove it with that version of roxio zap 6
i think u r trying to remove it with roxio zap that is meant for verions 4,5 which u said doesn't work
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson This message has been edited since posting. Last time this message was edited on 21. July 2006 @ 17:02
|
Moderator
|
21. July 2006 @ 18:00 |
Link to this message
|
|
|
maskeeta
Junior Member
|
22. July 2006 @ 08:34 |
Link to this message
|
|
^if you go to that link nad then click on screenshots, you can see it says "This application will ZAP files directorsi eand registry entries associated with Easy CD creator 4 and 5 and should not be run on a machine which has Esay CD and DVD creator 6 currently installed"
i have 6 and did run this before, and it looks liek i wasnt supposed to. is there even a ZAP for 6?
|
|
Advertisement
|
|
|
Moderator
|
22. July 2006 @ 09:37 |
Link to this message
|
|
I can't find one specific to 6. When you try & uninstall Roxio from add/remove programs in control panel - are you given any options - like update, repair, uninstall (not normally are but just checking).
|
|
