|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
Senior Member
|
12. July 2007 @ 06:55 |
Link to this message
|
Originally posted by buzzymcg:
Just got back from holidays to find box reading scrambled.Its got 7.52 software and was working fine before i went.I rescaned the channels and made sure all the locks were off and still nothing.Any ideas?
Was your box totally powered down or in Standby mode while you were away?
I think it needs to be powered at the time of any code changes in order to be able to update?
You should take the last codes posted back in this thread & re-enter them & see what happens (Maybe someone might look at their box & post the current codes for you) Then once you get sorted? leave it powered up.
|
|
Advertisement
|
 |
|
|
Senior Member
|
12. July 2007 @ 08:26 |
Link to this message
|
Hi buzzymcg,
Hope you had a good holiday,
These are the settings on my 752 replay lite.
Menu
User installation
Parental lock
Parental lock---off Install lock -----off
Press red Goto key manager
Current key OK
CA System Nagra auto update off
Provider ID 0055
Key ID 0x00
Key 0xa9.86.6e.ea.39.ea.09.49.
Press blue nagra key
Prov ID 0x01
0x00 0xf2.98.74.44.1c.65.77.d8
0x01 0x17.e3.e1.1d.89.4e.53.45
PRESS Exit till channels come back on, it may take a while to unscramble.
If though when you first powered up the box, the led was flashing red/green.
The box would be ok as it does when it is updating.
If it is flashing, leave it may take time for it to update.
Hope this works, I an on nhell network.
The best of luck
BRIAN1956
This message has been edited since posting. Last time this message was edited on 12. July 2007 @ 08:28
|
|
buzzymcg
Junior Member
|
12. July 2007 @ 09:39 |
Link to this message
|
|
It's fine now, I just reset the factory default rescaned the channels and it worked (don't know why it didn't happen the first time though).The box was powered off so I don't think it will affect everyone else
|
Senior Member
|
12. July 2007 @ 11:33 |
Link to this message
|
|
Nice 1 buzzymcg,
Thanks for the feedback.
Hope you brought back a stick of rock for everyone on this forum.
Happy Viewing,
BRIAN1956
This message has been edited since posting. Last time this message was edited on 12. July 2007 @ 11:35
|
|
emmaxxx
Junior Member
|
13. July 2007 @ 07:21 |
Link to this message
|
|
heya. im a trying to fix a friends replay lite box.. since he bought it ti has never worked i was wonderin if any1 cud give me the codes to put in to see if that wil fix it.. and i am unable to access the current key. does any1 no why this might be?? thanks..
|
Senior Member
|
13. July 2007 @ 07:41 |
Link to this message
|
Hi emmaxxx
Sorry you have no channels, the codes don't seem to be working with replay lite with 744 software.
First you have to check what software is on your replay lite.
Step 1: go to menu on your remote control.
Step 2: scroll down to utility and across to receiver information
click ok on remote control.
SW Version is probablly 7.44
this needs to be upgraded (flashed) to 752.
If this is the case, the files and instructions and files are on the links below, they are free to download.
Each of the files below contain Replay Lite Software version 7.52, the STB/PC interface (stb5.20) and full instructions tailored for either UK or Ireland.
Ireland
http://rapidshare.com/files/42765020/Rep....52_ie.zip.html
UK http://rapidshare.com/files/35886412/Replay_Lite_752_uk.zip.html
A Null Modem Cable is required which can be purchased for ?18. from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online for a fraction of the cost plus postage. One example of where they can be purchased online is http://www.amazon.co.uk/StarTech-com-Nul...9/dp/B00006B8BJ
Flashing your Replay Lite Box
Before you start you must have the following:
1. A Null Modem Cable L71 BT ( ABOUT 18 EURO ) IN MAPLINS
2. A PC with a free COM Port (9 pin male port)
3. Software STBlink5.20 (Client) (the software which flashes the box) plus the file which puts has the coding software 752 for the Replay Lite Box onto the actual unit.
Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button on the stb link 5.20 located on your computer If it?s connected a blue line will move from left to right confirming that a connection has been made.
KEEP MAINTAIN user box TICKED Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 752
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. Your unit should be flashed and ready to use and will update automatically
If you already had your channels tuned in they will be still there, flick through the channels until they unscramble. It can take up to a minute or two to find the codes from cable network.
If you have no channels you?ll need to do a channel scan. Go to Auto Search. You will note that the Symbol Rate is set to 6887 & 6952. This needs to be changed to just 6887 NHELL.IE as it will cut the search time in half. You can use the left/right arrow to change it or you can just type it in with the remote
"as for the 56 sec scan, pretty straight forward, dunno where you are or if it will work but my box starts scanning in the auto scan from about 162.00 mhz but it doesn?t actually pick up channels until it reaches approx. 339.5 or something, and even then when you leave it for 25 mins it picks up lots of channels twice and your no better off so having tried leaving the scan for over an hour and stopping it after 56 secs I found I get exactly the same amount of channels so I simply set the start frequency in auto search (up the top) to 338.6 and then press start, within 5 seconds the channels start to come in and being as sad as I am I timed it one night and it took 56 seconds to get every channel available".
"Dunno if it applies everywhere but in dublin my channel scan takes 60 secs, if you set the start frequency to 338.6Mhz instead of the normal 162.00Mhz.
The channels start to come in in about 4 seconds and they are completed within a minute, much easier".
There is a small glitch in the software which means that the ?info? button is not working. A patch will be developed for this.
If you have any trouble with sound just turn off/on the box and the sound will come in.
The most important part of flashing is to be patient and wait for the led on the box to be flashing much much more than you could visibly see the WHEN block transferring on your pc screen
the best of luck.
BRIAN1956 and http://www.iol.ie/~bullwallbarkers/colleen.html
go to page 38 of this forum for approx times for cloning and flashing
This message has been edited since posting. Last time this message was edited on 15. July 2007 @ 04:23
|
|
emmaxxx
Junior Member
|
13. July 2007 @ 08:54 |
Link to this message
|
|
i hav the lead... when i clicked on the link 4 ireland it said der was no file??? y is that??
|
|
robbie85
Newbie
|
13. July 2007 @ 09:08 |
Link to this message
|
Brian1956
Thanks for both your replies, I do have some channels on the box, rte2 and tv3 so i may as well have none and the normal cablelink aint no good after having all the other channels.
Anyway I got the box off a friends friends friend so I dont think i can get the box cloned, just checked the box and it is version 7.44. I am in Dublin so will head in looking for Maplins tomorrow to get a Null Modem Cable and then follow your instructions.
I will let you know how I get on.
Thanks Again
Robbie85
|
Senior Member
|
13. July 2007 @ 14:22 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 13. July 2007 @ 14:24
|
Senior Member
|
13. July 2007 @ 16:01 |
Link to this message
|
Hi peoples,
C***** codes irl
KEY 00 = 4B 7C D5 86 E7 01 CC 96
KEY 01 = 8E 8E 46 FD 36 28 A3 F0
n*l keys Ire
Line 00 = A9 86 6E EA 39 EA 09 49
Line 01 = 9E 40 85 78 E7 82 10 06
There could be a possible change if so here are the numbers 01 = 23 C5 32 FA 51 A6 50 02
LATEST CODES
N#L UK:
00: 3d 2b df aa 51 c8 dd a0
01: E2 C9 74 0A 04 22 A6 12
C#W
00: 1F EE 87 F9 E3 FA 2A AB
01: 5B 36 AE 71 F5 21 D1 3D
Telpest
00: AB 1E 05 EB C6 65 46 77
01: 51 6D 0F 08 41 BB D5 D8
BRIAN1956
|
|
redroy
Junior Member
|
14. July 2007 @ 07:31 |
Link to this message
|
|
To anyone who can HELP
Im trying to upgrade me sw to 752 currently 7.44 as my channels have been off all week.
Got a null modem cable this afternoon and downloaded the info to try and do this on the stb link 5.20 when i go to setup comm it keeps failing to make a connection.
Does anyone know what i am doing wrong?
|
|
darren66
Junior Member
|
14. July 2007 @ 07:52 |
Link to this message
|
Originally posted by redroy:
To anyone who can HELP
Im trying to upgrade me sw to 752 currently 7.44 as my channels have been off all week.
Got a null modem cable this afternoon and downloaded the info to try and do this on the stb link 5.20 when i go to setup comm it keeps failing to make a connection.
Does anyone know what i am doing wrong?
redroy 1stly Are you using serial port on pc or usb? if its usb you need to install driver if it is serial port try the other port. If no joy try keeping connected and rebooting pc if still no joy come back
|
|
redroy
Junior Member
|
14. July 2007 @ 07:58 |
Link to this message
|
|
redroy 1stly Are you using serial port on pc or usb? if its usb you need to install driver if it is serial port try the other port. If no joy try keeping connected and rebooting pc if still no joy come back
Serial port, its a female to female null modem cable isn't it that i should be using?
|
|
darren66
Junior Member
|
14. July 2007 @ 08:12 |
Link to this message
|
Originally posted by redroy:
redroy 1stly Are you using serial port on pc or usb? if its usb you need to install driver if it is serial port try the other port. If no joy try keeping connected and rebooting pc if still no joy come back
Serial port, its a female to female null modem cable isn't it that i should be using?
is it a "null modem cable"
|
|
redroy
Junior Member
|
14. July 2007 @ 08:20 |
Link to this message
|
is it a "null modem cable"
Yes its an rs232 from maplins tried re-booting but no luck.
When i downloaded the files form another thread http://eko.4shared.com/ on the 752 file it shows up as a bin file and my comp won't open this coz i do not have the programme. can this be the prob?
|
|
darren66
Junior Member
|
14. July 2007 @ 08:24 |
Link to this message
|
Originally posted by redroy:
is it a "null modem cable"
Yes its an rs232 from maplins tried re-booting but no luck.
When i downloaded the files form another thread http://eko.4shared.com/ on the 752 file it shows up as a bin file and my comp won't open this coz i do not have the programme. can this be the prob?
stblink will open the bin file for you have you tried changing the comm port
|
|
redroy
Junior Member
|
14. July 2007 @ 08:30 |
Link to this message
|
|
yes as i only have one comm port that is a female on the back of my pc on the replays onwers manual it mentions 3. An RF Adaptor (you should have got one with your box)
haven't got one of these haven't got a clue what ones looks like either.
Is this the problem?
|
Senior Member
|
14. July 2007 @ 10:58 |
Link to this message
|
Hi redroy,
Flashing your Replay Lite Box
Before you start you must have the following:
1. A Null Modem Cable L71 BT ( ABOUT 18 EURO ) IN MAPLINS
2. A PC with a free COM Port (9 pin male port)
3. Software STBlink5.20 (Client) (the software which flashes the box) plus the file which puts has the coding software 752 for the Replay Lite Box onto the actual unit.
Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button on the stb link 5.20 If it?s connected a blue line will move from left to right confirming that a connection has been made.
Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 752 (THE FILE IN THE FOLDER, you might have to drag the file from the folder and leave it on your desktop)
its easier to find then.
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
IMPORTANT
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN.
Your unit should be flashed and ready to use.
If you already had your channels tuned in they will be still there, flick through the channels until they unscramble. It can take up to a minute or two to find the codes from cable network.
If you have no channels you?ll need to do a channel scan. Go to Auto Search. You will note that the Symbol Rate is set to 6887 & 6952. This needs to be changed to just 6887 NHELL.IE as it will cut the search time in half. You can use the left/right arrow to change it or you can just type it in with the remote. Now press search and it will take about 20 minutes.
During the search it will not start to find channels for about the first 5-10 minutes as it has to go through all of the frequencies. It will eventually find around 242 TV and 63 Radio but it will reduce this amount to around 130 TV and 40 Radio as it deletes the duplicates. When it is finished scanning the ?Scanning? button will change to ?View?
Press view and this will save your channels.
If you see 1800 Scrambled ? just wait a minute or so for the keys to update. You will only have to do this once.
Once your first scrambled channel comes in ? they all will!
There is a small glitch in the software which means that the ?info? button is not working. A patch will be developed for this.
IF YOU HAVE TROUBLE WITH SOUND, SWITCH OFF/ON THE BOX AND THE SOUND WILL BE OK
Setting up the Favourites Menu
1. Press the menu button
2. Navigate to the Channel Manager Section (top of screen)
3. Go to the TV Channel section and press OK
4. The TV Channel Manager is now available
5. By default you are now on Favourite 1 (pressing the RED button will take you through favourites 1-8).
6. Pressing the GREEN (edit) button allows you to change the Favourite 1 Menu to something more appropriate. I?ve set my favourites 1-8 as follows
a. 1. Popular TV
b. 2. Movies
c. 3. Sport
d. 4. Factual
e. 5. UK TV
f. 6. Music
g. 7. Kids
h. 8. Your Choice
7. When you press the Green Button you will have the option to RENAME FAV (navigate to this and press OK). You can now manually rename the Favourite to what you want,
8. As you scroll through the channel listings you can add your favourites as follows. If you have a favourite called Popular TV you may want to add the standard freeview channels. When you navigate to BBC 1 press the OK button and a Smiley Face will appear next to the channel ? this means it has been added to this favourites menu.
9. When you have finished (with for example ? Popular TV) press the RED Button and you will now be on Favourites 2 (pressing the RED button will scroll you through each of the EIGHT Favourite menus). If as I?ve done you?ve renamed Favourites 2 to Movies you may want to add Sky Movies 1/2/3/4 etc
10. When you are finished with your favourites ? press exit and the data will be saved.
So all you need redroy is the null modem lead the stb( on your pc ) link which will transfer the 752 ( on your pc) from your pc to your box.
Abovw all, be patient, BRIAN1956
http://www.iol.ie/~bullwallbarkers/colleen.html
This message has been edited since posting. Last time this message was edited on 15. July 2007 @ 04:25
|
|
dog2
Newbie
|
14. July 2007 @ 11:28 |
Link to this message
|
|
is there any way that you can sort the progammes into an order of your own choice instead of alphabetical.
the sort unsort does not seem to do anything??
|
|
nev290
Newbie
|
14. July 2007 @ 11:54 |
Link to this message
|
|
Redroy did u get it sorted r are u still having problems?
|
|
nev290
Newbie
|
14. July 2007 @ 12:05 |
Link to this message
|
|
dog 2 you can move your stations 1 at a time press
menu, channel manager, tv channel, press green button and then move.
|
|
dog2
Newbie
|
14. July 2007 @ 12:09 |
Link to this message
|
|
hi Nev
i meant in the favourites groups,
|
|
redroy
Junior Member
|
14. July 2007 @ 12:13 |
Link to this message
|
|
Hi nev290 & BRIAN1956
Thanks for the reply lads been trying all afternoon, gonna give it another go tomoz with the info BRIAN gave me.
Gonna watch the boxing.
I'll let you know the outcome tomoz.
|
|
nev290
Newbie
|
14. July 2007 @ 12:20 |
Link to this message
|
|
Ok Red if it does'nt work let me know, I had the same prob with com port and got it going.
|
|
Advertisement
|
|
|
|
milltown5
Newbie
|
14. July 2007 @ 13:20 |
Link to this message
|
hi all
thanks to all of you contributors here I have finally managed to update my replay lite to 752.
Two questions remain !
will leaving the box on standby (red light on ) be ok to catch any change of codes or should I leave green light on all of the time ?.
with 752 now loaded what settings should install lock, parental lock and automatic update be at in order for the software to do its job ?
I am in N*T*L land (Galway)
again, thanks for all the help
Frank
|
