|
|
|
unable to prepare data for recording: failed to get disk content
|
|
|
monster3
Newbie
|
10. August 2006 @ 06:52 |
Link to this message
|
Help please.
My movie that I created in Nero 6/Vision Express 3 completes the transcoding process every time, but just before burning is started it gives the above error. I have a sony VRD-VC20 DVD-DL burner and the movie is just under 8GB. I used to have a Memorex DL DVD burner (external drive) and this drive gave the exact same error message...so I returned this drive to get the Sony, but am still getting the message. What do I need to do to get a movie to burn? using the Direct burn feature to burn a movie from the camera to the DVD burner works great with the dual layer disk.
I have updated the firmware and the software to their latest versions.
Any suggestions would be appreciated.
|
Senior Member
|
10. August 2006 @ 08:18 |
Link to this message
|
what type of files r u trying to do?
I dont think that your dvd Burners are the reason for not being able to burn, it is the Nero vision program that is messing up,
Did u save the log for it?if u did u can post the log to see if anybody can see what the error is in Nero Vision.
I too have got this error before when using vision 4 using a certain type of file. basically vision is not a very reliable program, there are programs out there that are better.
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
|
monster3
Newbie
|
10. August 2006 @ 08:50 |
Link to this message
|
Thanks! The filesbeing burned were created from my DV camcorder that were taken on vacation. I transferred them to my HD, then imported into Vision Express 3 (the bundled software) that came with the drive to make a movie. Below is the portion of the log file that has the error (at the very end is the error message)....this is the same error message I get when I used both the Memorex and Sony DVD burners: (seems as though the software is looking for (VOB_IDN=1, C_IDN=11);however in the beginning, the software never makes 11 it only goes to C_IDN=10)?????
__________________________
General information:
[02:16:59] DVDEngine ..size=3481289 (6.64 GB)
[02:16:59] DVDEngine ..capacity=3481289 (6.64 GB)
[02:16:59] DVDEngine ..VOB_Ns=1
[02:16:59] DVDEngine ..C_Ns=10
[02:16:59] DVDEngine ..VOBU_Ns=11662
[02:16:59] DVDEngine VOB information:
[02:16:59] DVDEngine ...VOB: VOBN=1, VOB_IDN=1, [0;3481288], C_Ns=10, VOB_V_S/E_PTM=32527/525404374
[02:16:59] DVDEngine .....Cell: C_IDN=1, [0;67572], VOBU_Ns=225, C_PBTM=1m52s.13
[02:16:59] DVDEngine .....Cell: C_IDN=2, [67573;355382], VOBU_Ns=958, C_PBTM=7m59s.04
[02:16:59] DVDEngine .....Cell: C_IDN=3, [355383;943004], VOBU_Ns=1956, C_PBTM=16m18s.05
[02:16:59] DVDEngine .....Cell: C_IDN=4, [943005;1670736], VOBU_Ns=2423, C_PBTM=20m11s.13
[02:16:59] DVDEngine .....Cell: C_IDN=5, [1670737;2070755], VOBU_Ns=1331, C_PBTM=11m05s.26
[02:16:59] DVDEngine .....Cell: C_IDN=6, [2070756;2659412], VOBU_Ns=1960, C_PBTM=16m19s.26
[02:16:59] DVDEngine .....Cell: C_IDN=7, [2659413;3012338], VOBU_Ns=1175, C_PBTM=9m47s.13
[02:16:59] DVDEngine .....Cell: C_IDN=8, [3012339;3304958], VOBU_Ns=975, C_PBTM=8m07s.20
[02:16:59] DVDEngine .....Cell: C_IDN=9, [3304959;3365706], VOBU_Ns=207, C_PBTM=1m43s.19
[02:16:59] DVDEngine .....Cell: C_IDN=10, [3365707;3481288], VOBU_Ns=452, C_PBTM=3m46s.00
[02:16:59] DVDEngine ----------------------------------------------------------------------------------------
[02:16:59] DVDEngine ********END: VTSTT_VOBS#1 - INFORMATION after Create
[02:16:59] DVDEngine ******END: VTSTT_VOBS#1 - Process Create
[02:16:59] DVDEngine ******BEGIN: VTSTT_VOBS#1 - Verify
[02:16:59] DVDEngine ******END: VTSTT_VOBS#1 - Verify
[02:16:59] DVDEngine ..VTSTT_VOBS: size=6.64 GB (7,129,679,872 bytes)
[02:16:59] DVDEngine ****END: Create - VTSTT_VOBS#1
[02:16:59] DVDEngine ****BEGIN: Create - VTSTT_VOBS#2
[02:16:59] DVDEngine ******BEGIN: VTSTT_VOBS#2 - Process Create
[02:16:59] DVDEngine ********BEGIN: _VOBS - Process VOB
[02:16:59] NeroVision Analyze video stream
[02:16:59] NeroVision Seg. | frames | weight | volume
[02:16:59] NeroVision ------+---------+--------+--------
[02:16:59] NeroVision 0 | 6780 | 2 | 13560
[02:16:59] NeroVision ------+---------+--------+--------
[02:16:59] NeroVision total : 13560
[02:16:59] NeroVision Set Preview Channel
[02:16:59] MMTools adding cached f:\New Folder\MokiMacSlides.avi video/0
[02:19:33] MMTools adding cached f:\New Folder\MokiMacSlides.avi audio/0
[02:19:33] DVDEngine ...New VOB 1
[02:19:33] DVDEngine ..>VOB: VOBN=1, VOB_IDN=1, SA=0, VOB_V_S_PTM=32234
[02:19:33] DVDEngine ...New CELL 1
[02:19:33] DVDEngine ....>Cell: C_IDN=1
[02:23:51] DVDEngine ....|Cell: C_IDN=1, [0;115552], VOBU_Ns=452, C_PBTM=3m46s.00
[02:23:51] DVDEngine ..|VOB: VOBN=1, VOB_IDN=1, [0;115552], C_Ns=1, VOB_V_S/E_PTM=32234/20392574
[02:23:52] GCCore The following operation did not finish in the past 15 seconds: Grab still image (AVStillSource)
[02:23:58] DVDEngine ********END: _VOBS - Process VOB
[02:23:58] DVDEngine ********BEGIN: VTSTT_VOBS#2 - INFORMATION after Create
[02:23:58] DVDEngine ----------------------------------------------------------------------------------------
[02:23:58] DVDEngine General information:
[02:23:58] DVDEngine ..size=115553 (226 MB)
[02:23:58] DVDEngine ..capacity=115553 (226 MB)
[02:23:58] DVDEngine ..VOB_Ns=1
[02:23:58] DVDEngine ..C_Ns=1
[02:23:58] DVDEngine ..VOBU_Ns=452
[02:23:58] DVDEngine VOB information:
[02:23:58] DVDEngine ...VOB: VOBN=1, VOB_IDN=1, [0;115552], C_Ns=1, VOB_V_S/E_PTM=32234/20392574
[02:23:58] DVDEngine .....Cell: C_IDN=1, [0;115552], VOBU_Ns=452, C_PBTM=3m46s.00
[02:23:58] DVDEngine ----------------------------------------------------------------------------------------
[02:23:58] DVDEngine ********END: VTSTT_VOBS#2 - INFORMATION after Create
[02:23:58] DVDEngine ******END: VTSTT_VOBS#2 - Process Create
[02:23:58] DVDEngine ******BEGIN: VTSTT_VOBS#2 - Verify
[02:23:58] DVDEngine ******END: VTSTT_VOBS#2 - Verify
[02:23:58] DVDEngine ..VTSTT_VOBS: size=226 MB (236,652,544 bytes)
[02:23:58] DVDEngine ****END: Create - VTSTT_VOBS#2
[02:23:58] DVDEngine ..Layer jump generated at LSN 1fa040h (2072640)
[02:23:58] DVDEngine ..Layer jump location in DVD-Video Zone:
[02:23:58] DVDEngine ....Domain: VTSTT_VOBS#1
[02:23:58] DVDEngine ....cell: VOBN=1, CN=5, VOB_IDN=1, C_IDN=5, (auxiliary cell)
[02:23:58] DVDEngine **END: _DVDVideo - Create
[02:23:58] DVDEngine END: IDVDVideoSessionImpl - CreateVOBs
[02:23:58] DVDEngine BEGIN: IDVDVideoSessionImpl - CreateDesc
[02:23:58] DVDEngine **BEGIN: _DVDVideo - Create
[02:23:58] DVDEngine ****BEGIN: Create - VTSI#1
[02:23:58] DVDEngine ******BEGIN: VTSI#1 - Create
[02:23:58] DVDEngine ...VTSM_VOBS_exist = false
[02:23:58] DVDEngine ...VTSM_PGCI_UT_exist = true
[02:23:58] DVDEngine ...VTS_TMAPT_exist = true
[02:23:58] DVDEngine ...VTSI_MAT created...
[02:23:58] DVDEngine ...VTS_PTT_SRPT created...
[02:23:58] DVDEngine ******END: VTSI#1 - Create
[02:23:58] DVDEngine ****END: Create - VTSI#1
[02:23:58] DVDEngine **END: _DVDVideo - Create
[02:23:58] DVDEngine ########################################################################################
[02:23:58] DVDEngine ERROR
[02:23:58] DVDEngine cause: 3 (invalid_parameter)
[02:23:58] DVDEngine source: _get_PGC_PB_TM
[02:23:58] DVDEngine description: ICellRef refers a cell (VOB_IDN=1, C_IDN=11) which does not exist in
[02:23:58] DVDEngine VTSTT_VOBS#1.
[02:23:58] DVDEngine ########################################################################################
[02:23:58] DVDEngine END: IDVDVideoSessionImpl - CreateDesc
_____________________
any additional help on this would be greatly appreciated.
|
|
Advertisement
|
 |
|
Senior Member
|
11. August 2006 @ 06:11 |
Link to this message
|
Nero bundle basic 6 i wonder if it timed out on the extra features
RBROCK
|
|
