User User name Password  
   
Wednesday 30.7.2025 / 02:33
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > archived forums > xbox - hardware boot discussion > no video on xecuter 3 ce
Show topics
 
Forums
Forums
no video on xecuter 3 ce
  Jump to:
 
Posted Message
ticals
Newbie
_
21. August 2006 @ 03:19 _ Link to this message    Send private message to this user   
please someone help, i soldered my x3 flashed the bios with the newest bios configured all my settings everything was working perfect
i tried to boot using quicklaunch it says to hold trigger to boot from app, i didnt know which one was considered the trigger so i held down all buttons during boot, when i let go the xbox rebooted with no video. I unplugged it and left it for 5 min still nothing but ive been getting audio. when i change the dipswitches to another bank, the screen comes on to flash the bios, so i flashed a new one in another bank,and when it shut down after installing the bios i turned it back on and the same thing is happening. you can here everything going on but there is no video... PLEASE SOMEBODY HELP ME
Advertisement
_
__
Stu_M
Account closed as per user's own request
_
22. August 2006 @ 01:37 _ Link to this message    Send private message to this user   
Ok! I was hoping someone else would reply but I have a long shot for you. Any chance you changed the video mode on the eeprom. Go into the chip settings and make sure it is set to the right region. Use the map on the right here http://en.wikipedia.org/wiki/PAL . Its a long shot but all i can think of.
Stu_M
Account closed as per user's own request
_
22. August 2006 @ 10:36 _ Link to this message    Send private message to this user   
Hay, buddy just found this on http://www.team-xecuter.com/

I dont know if this is your problem. Have a look and see.
Quote:
If you get a black video screen then you most probably have a new v1.6b Xbox (check to see if the system RAM is made by Hynix) and you have an older version of FlashBIOS. You will need to send it back to your installer to get it updated to FlashBIOS v3.03 or see if you can get a friend to do it for you. Remember FRAG = Faulty Install, Black Screen = New Xbox/Old Bios :)
The exact page is http://www.team-xecuter.com/flashbios/

This message has been edited since posting. Last time this message was edited on 22. August 2006 @ 10:38

ticals
Newbie
_
22. August 2006 @ 21:14 _ Link to this message    Send private message to this user   
thanx, the problem was that when i hit all the buttons on the controller i had enabled PAL setting, but i couldnt get it back to NTSC because i couldnt see anything. i had to download pictures of the x3 bios and blindly find my way to the setting using pictures of the bios and it worked thank you
Stu_M
Account closed as per user's own request
_
23. August 2006 @ 01:10 _ Link to this message    Send private message to this user   
Your welcome,

I thought it sounded like that but i wasnt sure because I dont use the X3.

Glad to see it fixed,
Stu_M
Advertisement
_
__
 
_
Senior Member
_
24. August 2006 @ 08:50 _ Link to this message    Send private message to this user   
another thing you could have done was dl Enigmah's video switcher , and booted it, if you hold A and restart the xbox your video mode will be switched to NTSC, if you hold B its PAL.


afterdawn.com > forums > archived forums > xbox - hardware boot discussion > no video on xecuter 3 ce
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork