|
|
|
Burning problem with HL-DT-ST DVD+-RW GWA4040N
|
|
|
chorchas
Newbie
|
23. August 2006 @ 09:23 |
Link to this message
|
Hello, I have a Gateway lap top, it came with a HL-DT-ST DVD+-RW. The original firmware version was 1.02 with region code restricted by a counter. I found an upgrade and now I'm using the 1.03. The difference between the two version was that one show explicit the +- (HL-DT-ST DVD+-RW GWA4040N vs HL-DT-ST DVD-RW GWA4040N). Well that's not really the problem (just wanted to explain the all the variables).
I'm able to burn CD's at 16X wuth no problems. The problem was that I can't burn DVD's. I'm using pleomax 8X DVD-R form Samsung.
This is the information that I got using Nero InfoTool about a blank DVD:
Layers: 2
Supported Speeds: 2.0X
Blanck capacity: 4.38GB
Manufacturer ID: OPTODISCR008
Copy protection: n/a
This has been the brand that I have purchased from a year now. But I don't know why the new ones I bought are not good anymore. I also tried with Imation DVD+R and Verbatim DVD-R. The DVD trayled starts to blinck, after few seconds stops and then the process dies :( I remember that the process was more o less the same, but after the lights turned off, it re-starts blinkink and burning withou any further problems.
Some times the drive produces coasters, the DVD shows that no session was burned, but the space availible is 0. Both the simulation and write processes fail.
I also have defrag my disk with Norton and another software named VoptXP to ensure I have plenty of contiguos space.
What do you suggest ohh mighty DVD gods :)!!!
I enclose my log file from my last try.
"license removed"
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 p.m.
ahead WinASPI: File 'C:\Archivos de programa\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 21/08/2006 10:05:16 a.m.
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVD+-RW GWA4040N>Version: 1.03 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVD+-RW GWA4040N>Version: 1.03 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+-RW GWA4040N E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (70254592) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 206MB (211956kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.8.2006
ISO compilation
12:21:30 p.m. #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:21:30 p.m. #2 Text 0 File Reader.cpp, Line 127
Reader running
12:21:30 p.m. #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD+-RW GWA4040N running
12:21:30 p.m. #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:21:30 p.m. #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:21:30 p.m. #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2096271 (465:50.21, 4094MB)
12:21:30 p.m. #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:21:30 p.m. #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+-RW GWA4040N, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193
12:21:30 p.m. #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:21:30 p.m. #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2096272 (2096272) = #2096272/465:50.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2096272 blocks [HL-DT-ST DVD+-RW GWA4040N]
--------------------------------------------------------------
12:21:30 p.m. #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+-RW GWA4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4293165056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2096272 | lead-out | 1 | 0x41 | 0x00
12:21:30 p.m. #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:21:31 p.m. #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:21:31 p.m. #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:21:31 p.m. #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
12:21:31 p.m. #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:21:31 p.m. #17 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
12:21:31 p.m. #18 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
12:21:31 p.m. #19 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
12:21:31 p.m. #20 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:21:52 p.m. #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
12:21:52 p.m. #22 CDR -1135 File Writer.cpp, Line 311
Write error
12:21:52 p.m. #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:21:52 p.m. #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:21:52 p.m. #25 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
12:21:52 p.m. #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18/08/2001 5:07:32 a.m.
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 p.m.
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 5:28:13 p.m. (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 11:59:44 p.m. (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I really would thank any help form you guys :)
|
Senior Member
|
23. August 2006 @ 12:26 |
Link to this message
|
chorchas hi :)
Quote:
HL-DT-ST DVD+-RW GWA4040N>Version: 1.03
newest firmware is 1.04 get from here
http://forum.rpc1.org/dl_result.php?kaj=1&isces
Quote:
Disc Manufacturer: OPTODI - SCR008
not to good, try some better media
Quote:
Burn process started at 2x (2,770 KB/s)
try burning a little faster, about half the max speed, burning too slow can cause as many errors as burning to fast
 gif by ireland
we cant help if you wont help yourself |
|
chorchas
Newbie
|
23. August 2006 @ 19:29 |
Link to this message
|
Thanks for the advice, after work, I went to Office Depot; I bought a Sony DVD-R and a Memorex DVD-R (same problems as in Samsung).
I have seen the 1.04 firmware upgrade from that page before but I haven't tried since the link says it's only for Fujitsu-Siemens drives. When I try to use burn the firmware the program responds with "can't find the drive". I guess it doesn't find the Siemens drive signature os something like it.
I'm thinking this might be a problem with WindowsXP and/or Nero. The problems began after I installed Nero 7.X and then returned to Nero 6 cause' the 7.X version sucks.
I'm thinking on doing a full backup of my PC this weekend and restore the original Gateway image to get it right.
I'll tell you how did it go :)
Thanks again for your help.
Chorchas
|
|
Advertisement
|
|
|
|
chorchas
Newbie
|
24. August 2006 @ 11:38 |
Link to this message
|
Hi there...
I made a DVD backup using shrink DVD, in the burning process I used a DVD+R and blew up :(
Then, I used Nero but with a DVD-R, you won't believe it!!! it worked!!!
I was so happy, I thought everything was fine. After I tryed to burn a DVD-ISO disc with Mp3 files on it, or any other common file does not work :( why is that? I figured that maybe the files were to fragmented or something like it. I made a chache file of all the files to burn, so I have it in one large continous file, but guess what? no luck :(
Any suggestion DVD Gods?
Thanks :)
|
|
