|
|
|
a few questions you all can answer fast and easily i'm sure
|
|
|
Blitz99
Newbie
|
3. September 2006 @ 10:38 |
Link to this message
|
i use AnyDVD and shrink... then i burn with Nero through shrink...
my dvd -r's are memorex...
when i burn, i do not have any other options then 16x and maximum... i want to burn at 8x but i cant seem to adjust this...
when i go into Nero for speeds, it only says read speed, nothing for write.
i downloaded imgburn and that didnt seem to help me, since i couldnt figure out how to use it... yes, i'm a newbie, been burning for 4 months and i guess luckily.
lately i've ran into a ton of issues with failed burns and to be honest, i haven't a clue what half the dvd stuff means...
iso files, etc... i'm clueless...
right now, i just want to change the Nero burn speed.
i dont know geek speak.
|
|
Advertisement
|
 |
|
|
Moderator
|
3. September 2006 @ 10:55 |
Link to this message
|
Hi Blitz99
Do you have a blank in the drive before you go to pick the burn speed in Shrink?
For the failed burns probably cause of the media you are using - Memorex well sucks.
You can also post your last Nero log and we can take a peek & see if anything else is amiss.
For Nero 6 go to:
program files>ahead>nero>nerohistory
For Nero 7 go to:
program files>nero>nero 7>core>nerohistory.
Just copy and paste the last one - they are usually separated by something like this - ====== *** Nero-Burning Rom, History File *** ======
Edit out the serial # too - usually begins w/ 1A, 1C or 5C.
|
|
Blitz99
Newbie
|
3. September 2006 @ 11:23 |
Link to this message
|
====13:44:53 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/22/2005 7:46:53 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 6:33:44 PM
Nero API version: 6.3.1.20
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDRW IDE 16X> Version: A089 - HA 1 TA 1 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 52049H3 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST320011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP CD-Writer+ 8100 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NE4017A MUN232M 2.0B vaxscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HP CD-Writer+ 8100 E: CDRom0
DVDRW IDE 16X D: CDRom1
NE4017A MUN232M F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 158MB (162376kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.8.2006
NeroAPI
5:49:18 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
5:49:18 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
5:49:18 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
5:49:19 PM #4 Text 0 File Reader.cpp, Line 126
Reader running
5:49:19 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:49:19 PM #6 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running
5:49:19 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:49:19 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:49:19 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
5:51:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
5:51:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
5:51:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
5:51:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
5:51:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------
5:51:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
5:51:43 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
5:51:43 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
5:51:43 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
5:51:43 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 16x (22,160 KB/s)
5:51:43 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:51:43 PM #21 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode
5:51:43 PM #22 Text 0 File Mmc.cpp, Line 20531
Set BUFE: Super Link -> ON
5:51:43 PM #23 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes
5:51:43 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:51:52 PM #25 Text 0 File Cdrdrv.cpp, Line 1294
17:51:52.578 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.437 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #27 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.484 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #28 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.531 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #29 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.562 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #30 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.609 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #31 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.656 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #32 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.687 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #33 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.750 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #34 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.796 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #35 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.828 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #36 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.875 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #37 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.921 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:39 PM #38 Text 0 File Cdrdrv.cpp, Line 1294
17:52:39.953 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #39 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.015 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #40 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.062 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #41 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.093 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #42 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.140 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #43 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.187 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #44 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.234 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #45 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.265 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #46 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.312 - DVDRW IDE 16X\H1 T1 : Queue again later
5:52:40 PM #47 Text 0 File Cdrdrv.cpp, Line 1294
17:52:40.343 - DVDRW IDE 16X\H1 T1 : Queue again later
5:58:20 PM #48 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00CD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x21 0x2E 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
5:58:20 PM #49 CDR -1135 File Writer.cpp, Line 304
Write error
5:58:21 PM #50 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
5:58:21 PM #51 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
5:58:21 PM #52 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was 2174463
5:58:22 PM #53 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 16x (22,160 KB/s)
5:58:22 PM #54 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
5:58:22 PM #55 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 12/22/2005 7:46:53 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[31.08.2006]------------------------------------
17:49:18 Robot error messages from:
i dont know geek speak.
|
Moderator
|
3. September 2006 @ 12:06 |
Link to this message
|
Ok here's some suggestions:
Quote:
Nero API version: 6.3.1.20
Update Nero to this version - last one of 6 to autoburn w/ Shrink - 6.6.0.18. This may help some picking a different burn speed - but if you are using the same drive to read and write from (looks like from the log you are) your burn options may be limited like to 1x,2x, 2.4 or max using Nero to burn w/ Shrink.
Here's a link to some guides and how to autoburn w/ ImgBurn and Shrink:
http://forum.digital-digest.com/showthread.php?t=63869
Quote:
Recorder: <DVDRW IDE 16X> Version: A089
Drive can use a firmware update to - the latest is A187. Here's a link:
http://forum.rpc1.org/dl_firmware.php?download_id=1913
Quote:
Disc Manufacturer: RITEKF - 1
The Memorex you have were made by Ritek - ok. Firmware update may help them. Better to use would be Vebratim or made in Japan Fuji, Sony or Maxell.
Try these and keep us posted!
|
Senior Member
|
3. September 2006 @ 12:30 |
Link to this message
|
after ur done with what binkie said to do
try this too
Quote:
5:51:43 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 16x (22,160 KB/s)
Try burning them at 8x speed, if u can select it. A good rule for burning speeds is half of what the max speed says on the box
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
pretty close to the egde, try changing the output size in shrink heres a pic where to do this try 3600 or 4400
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
|
Advertisement
|
|
|
|
Blitz99
Newbie
|
3. September 2006 @ 18:25 |
Link to this message
|
|
somehow i ripped a movie and saved it to my HDD, then put in the blank and it allowed me to choose 8x copy speed.. this worked fine.
hopefully i can figure out how i did that. i also changed the output size to 4400 as shown...
thank you for your help.. i'm certain i'll have more questions soon.
i dont know geek speak.
|
|
