Help Please!


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Sunday 10.8.2025 / 02:39

Search AfterDawn Forums:

afterdawn.com > forums > archived forums > xbox - software discussion > help please!

Browse by topic

Forums

Help Please!

Jump to:

Posted

Message

Eclipze22

Junior Member

22. October 2006 @ 18:31

Link to this message

Ok i had error 21 and i tried to hotswap but it wasnt working. So i put my xbox back together (All the cords and everthing are in) and know i get error 7. Is there any way to fix this?

[ + quote]

xxteakxx

Senior Member

22. October 2006 @ 18:41

Link to this message

7 - kernel - HDD timeout

Most of the times, the IDE cable is not properly connected when you see this error. Please reattach the ide cable. Not only to the harddisk drive but also to the dvd drive. ALso try to reconnect the ide cable to the motherboard.

Press pretty hard so it goes all the way in. Make sure it is seated straight and proper in the drives and the motherboard. If you still have an error 7. Try another ide cable. If that won't work try another harddisk. If there is still no go, try to set the jumpers on the rearside of the harddisk drive. Set it to master or cable select.

[ + quote]

This message has been edited since posting. Last time this message was edited on 22. October 2006 @ 18:41

PAN5Y

Senior Member

22. October 2006 @ 18:49

Link to this message

im not sure if this will work with error 7..but try to disconect the back of the dvd drive **while the xbox is off**then plug it back in then it should give u error 11..which is the same as error 10

10 - kernel - DVD timeout

Actually its almost the same as error 6/7/8. But also make sure the yellow cables are properly connected to the motherboard and the dvd drive.

1. Make sure ide cables are connected good.
2. Make sure the yellow cables are good and properly connected.
3. Still no succes? Try another dvd drive of which you are sure it is working.

11 - kernel - No DVD Found

Same as #10 So read up please!

[ + quote]

http://evolution-modding.com/forums/index.php
Name on SIte

FallenFailure

Eclipze22

Junior Member

22. October 2006 @ 19:00

Link to this message

alright i used a new IDE cable and everything is in. But now when i turn it on it like reboots 3 times then it blinks Red and Green. Help Please?

[ + quote]

xxteakxx

Senior Member

22. October 2006 @ 19:06

Link to this message