|
burn setting
|
|
Senior Member
|
23. October 2006 @ 15:59 |
Link to this message
|
|
|
|
Advertisement
|
|
|
|
|
kchev
Member
|
23. October 2006 @ 17:51 |
Link to this message
|
|
Do you have a dvd burner capable of booktyping? Do you have a +R disc in burner? Are you burning straight to disc or hard drive?
|
Senior Member
|
23. October 2006 @ 18:06 |
Link to this message
|
|
i dont think so. nec nd11ooa . i have been researching booktyping lately. still a lit confusing but i was hoping some day to figure it out. i would like to booktype a few dvd to rom to see if they will work in my older player
|
|
kchev
Member
|
23. October 2006 @ 18:19 |
Link to this message
|
|
That is probably why your box is grayed out. You have to have a burner capable of booktyping. There may be some hacked firmware to flash your drive with to make it able to booktype but can't remember. I had an NEC 1300A a few years ago that I flashed with hacked firmware to enable bitsetting and it worked like a charm.
|
|
CNASJUnit
Junior Member
|
23. October 2006 @ 18:27 |
Link to this message
|
|
I'm rather nice with computers, although burning drives, not too familar. A tad off topic, but are LITE-SCRIBEs the only burner that can do dual-layer? And this booktyping. Care to redirect me to a post where mentioned? It'd be appreciated, thanks.
|
Senior Member
|
23. October 2006 @ 18:32 |
Link to this message
|
i think it was arniebear who gave me this link http://www.micheldeboer.nl/firmware/index.html
went there and down loaded 1.6 original firmware my version was lower but had some concern after.so i removed it . but i did not know if i should use original or modified
cnsj i find alot of good info in search.
i have started a thread on booktyping i think on page 3
This message has been edited since posting. Last time this message was edited on 23. October 2006 @ 18:36
|
|
kchev
Member
|
23. October 2006 @ 18:40 |
Link to this message
|
http://www.herrie.org/
This is where I got the firmware for my 1300A at the time.
Litescribes are not the only drives to do bitsetting or dual layer burning. Pretty much all new drives now are dual layer burners. Only some drives support bitsetting though. It varies by manufacturer and models that have hacked firmwares.
|
|
CNASJUnit
Junior Member
|
23. October 2006 @ 18:43 |
Link to this message
|
I understand all that. But people been talkin' on here, firmware that's able to burn dual-layers? I didn't know that was firmware, I thought the etching that's done from the laser is strictly hardware, and must be changed if a DVD-R burner can't do a dual-layer?
|
Senior Member
|
23. October 2006 @ 18:49 |
Link to this message
|
|
looks like that will work for me iam going to try now
thanks a lot.now this will enable me to burn as dvdrom. i will post result most likely tomorrow
This message has been edited since posting. Last time this message was edited on 23. October 2006 @ 18:51
|
Senior Member
|
23. October 2006 @ 18:54 |
Link to this message
|
|
cnasj
you would be better starting your own thread with the question you need answers to . i cannot help you it is above me
|
Senior Member
|
23. October 2006 @ 19:39 |
Link to this message
|
|
kchev
i down loaded it cannot open file
|
|
kchev
Member
|
24. October 2006 @ 05:58 |
Link to this message
|
I just downloaded it and opened it fine. Do you have WinRAR program because that is the type of file it is
|
Senior Member
|
24. October 2006 @ 06:06 |
Link to this message
|
|
no i do not have that. i could not figue out what i need to open it. thanks
|
|
CNASJUnit
Junior Member
|
25. October 2006 @ 09:03 |
Link to this message
|
Rar files require WinRAR, or another rar-extracting program. Zip files require WinZIP, or another zip-extracting program. If you have a file extension, and don't know what to do with it, google it on the net; I'm sure you can find nearly extension, with explanations.
|
Senior Member
|
25. October 2006 @ 19:19 |
Link to this message
|
|
updated firmware all seem ok so far. thanks
|
|
Advertisement
|
|
|
Moderator
|
26. October 2006 @ 01:41 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 26. October 2006 @ 22:42
|
