|
|
|
Caillou burn error
|
|
|
crazyman1
Junior Member
|
30. October 2006 @ 16:24 |
Link to this message
|
i was wondering if anybody has tryed backing up any of the Caillou kids movies? I have tryed backing them up and it errors out on the burn every time. Here is the burn log
Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <LITE-ON DVDRW SOHW-1613S>Version: AS06 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <intelata> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
TOSHIBA DVD-ROM SD-M1212 (Target 0, F:): Autoinsert Off, DMA On, Disconnect Off, SyncDataXfer Off
LITE-ON DVDRW SOHW-1613S (Target 1, G:): Autoinsert Off, DMA On, Disconnect Off, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 56623104 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 375MB (384464kB)
Free physical memory: 36MB (37020kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.10.2006
NeroAPI
10:28:36 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
10:28:36 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
10:28:36 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:28:36 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
10:28:36 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1613S running
10:28:36 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:28:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:28:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:28:36 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:30:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1878447 (417:25.72, 3668MB)
10:30:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
10:30:36 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1613S, Media type: DVD-R
Disc Manufacturer: TYG01 -
Disc Application Code: 64, Disc Physical Code: 193
10:30:36 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
10:30:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1878448 (1878448) = #1878448/417:25.73
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1878448 blocks [LITE-ON DVDRW SOHW-1613S]
--------------------------------------------------------------
10:30:36 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1613S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3847061504, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1878448 | lead-out | 1 | 0x41 | 0x00
10:30:36 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:30:36 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:30:36 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:30:36 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
10:30:36 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:30:36 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
10:30:36 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
10:30:36 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
10:30:36 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:31:23 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
22:31:23.700 - LITE-ON DVDRW SOHW-1613S\H1 T1 : Queue again later
10:31:32 PM #26 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05B50A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x00 0x00
10:31:32 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
22:31:32.160 - LITE-ON DVDRW SOHW-1613S\H1 T1 : Queue again later
10:31:38 PM #28 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03410000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x00 0x00
10:31:38 PM #29 CDR -400 File Writer.cpp, Line 311
Unspecified target error
LITE-ON DVDRW SOHW-1613S\H1 T1
10:31:38 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:31:38 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:31:38 PM #32 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 31
10:35:06 PM #33 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
10:35:06 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:35:06 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2225, size=24430 bytes, created 2/2/00 5:46:04 PM
File 'IoSubsys\AFL.VXD': Ver=5.15, size=17052 bytes, created 10/31/01 9:13:54 AM
File '..\System32\Drivers\1394bus.sys': Ver=4.10.2224, size=38016 bytes, created 10/11/99 4:57:18 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=4.10.2226, size=36720 bytes, created 6/28/00 1:11:28 PM
File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2227, size=8816 bytes, created 6/28/00 1:18:44 PM
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2223, size=9849 bytes, created 10/12/99 2:56:42 PM
File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2226, size=36352 bytes, created 6/28/00 1:11:58 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2223, size=69594 bytes, created 10/12/99 3:02:40 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2223, size=18889 bytes, created 11/17/99 5:36:48 PM
Registry Keys:
|
|
Advertisement
|
 |
|
|
Moderator
|
30. October 2006 @ 17:02 |
Link to this message
|
Hey there crazyman1
File 'IoSubsys\NEROCD95.VXD':
Looks like you have an old version of Nero's InCD still on the pc - Check add/remove programs for it. Unisntall it and run the InCD Clean Tool
Unspecified target error If InCd is still there might be causing this error.
Check this too - In SmartStart go to ToolKit>InfoTool>ASPI tab - see if anything shows as corrupted in there.
Trying burning this video_ts folder w/ a free program ImgBurn. You would use the build mode since you would be burning the video_ts folder Shrink saved to your hard. Here's a guide too:
http://forums.afterdawn.com/thread_view.cfm/383878
Give that a go and see how that goes.
edit to add: may want to try a registry cleaner (if not using one)like ccleaner Supports your os - Windows 98 - but I have never used on that OS.
Do a disc cleanup and disc defrag too.
This message has been edited since posting. Last time this message was edited on 30. October 2006 @ 17:09
|
|
crazyman1
Junior Member
|
30. October 2006 @ 17:12 |
Link to this message
|
|
ok you just lost me lol
so i go to add/remove programs and look for Nero's InCD and remove it?
I take it I dont want incd on my computer?
Please let me know before i delete the wrong thing.
thanks again.
|
|
crazyman1
Junior Member
|
30. October 2006 @ 17:16 |
Link to this message
|
|
what do you mean by In SmartStart go to ToolKit>InfoTool>ASPI tab
what and where is smartstart?
|
Moderator
|
30. October 2006 @ 17:31 |
Link to this message
|
|
Sorry there crazyman1
SmartStart is Nero's like command center. You access all the different apps thru it. Usually a desktop icon.
Yes look in add or remove programs for InCD. If you see it - uninstall it. It's Nero's packet writing software that can cause problems.
|
|
crazyman1
Junior Member
|
30. October 2006 @ 17:38 |
Link to this message
|
|
i went into add or remove programs and DID NOT see incd in there.
i ran InCD Clean Tool and it found some stuff that must of been left behind when ever incd was UNinstalled.
now im off to see if i can find SmartStart.
Be back in a few. lol
|
Moderator
|
30. October 2006 @ 17:49 |
Link to this message
|
|
Ok try some of there other suggestions too - it sounds like your pc may need a bit of cleaning up.
|
|
crazyman1
Junior Member
|
30. October 2006 @ 17:59 |
Link to this message
|
|
whos other suggestions?
i finley found smart start and went to toolkit>infotool>aspi tab and it says aspi is installed and working properley.
|
Moderator
|
30. October 2006 @ 18:08 |
Link to this message
|
|
Mine :) See above. Trying to rule out any conflicts. I'd hate to say it's the drive then you stick a new one in there and same thing happens.
You're good on the aspi too.
|
|
crazyman1
Junior Member
|
30. October 2006 @ 19:04 |
Link to this message
|
|
i'm going to run ccleaner then i'm going to do a disc cleanup and disc defrag. then i will start this movie over from scratc and see what happens.
if it still does the same thing do you think it could be my burner going south?
|
Moderator
|
30. October 2006 @ 19:22 |
Link to this message
|
Maybe - but let's clean things up a bit. Run a antivirus and spyware scan too.
Since I'm not that familiar w/ 98 another suggestion is to look up some of these conflicting drivers in the Nero log and see if they may be leftovers from an uninstall of some software.
File 'IoSubSys\SCSI1HLP.VXD':
File 'IoSubsys\CDFS.VXD':
File 'IoSubsys\ESDI_506.PDR':
File 'IoSubsys\AFL.VXD':
I could be way off base on these but I'll try & do a google and see what I can find on them. Won't be til tomm though. In the meantime you can try and find them and see if something rings a bell - software wise.
But 1st do the other steps and try the burn again - fails - post the logs and we'll see what's left.
|
|
crazyman1
Junior Member
|
30. October 2006 @ 19:35 |
Link to this message
|
|
i will do the other things first. if you find out anything about the files please let me know.
i even thought about puting another hd in and doing a fresh install of the operating system and just the software i need and see what happens then.
thanks for all your help on this.
|
Moderator
|
30. October 2006 @ 19:44 |
Link to this message
|
|
That's not a idea bad at all. Even if it does turn out to be the drive it still may be a good idea. One way to get a clean o/s and hard drive :) (which might be best anyhow - depending on what shape this pc is in) Cheaper than a new pc. You use this one just for burning if I remember right?
I'll see what I can find and let you know.
|
|
crazyman1
Junior Member
|
31. October 2006 @ 05:57 |
Link to this message
|
yes this is the stand alone pc just for burning and it works great. I just need to upgrade the memory a little as you can see.
If i start over i dont have the serial number for Nero so what would i do to reinstall it? i up dated it from that link you gave me when i first posted on here.
|
Moderator
|
31. October 2006 @ 14:54 |
Link to this message
|
Hey crazyman1
The serial # will also be in SmartStart - Product center (see pic below)
In the right hand corner of SmartStart click on the icon w/ a flame in then the serial # tab.
Yeah more memory would be good. One weird thing about the Nero log is it's report 56% in use - wrong it's actually 90% in use.
I checked out those drivers and yep I was off base - except the Nero one they are all devices,network driver etc for 98.
How did you make out burning again after doing the maintenance bit?
If failed - try ImgBurn. If that fails then may be time for a new drive.
|
|
crazyman1
Junior Member
|
31. October 2006 @ 19:08 |
Link to this message
|
|
so the drives are all good then?
i have not tryed another burn yet i just got home frm trick a treating with my 5yr old son. will try hopefully tomorrow.
i'm going to try to pick up a 256 soon and see what that does.
|
Moderator
|
1. November 2006 @ 13:34 |
Link to this message
|
|
The drivers in the log all look okay - w 98's drivers.
Do the maintenance bit and try again. Keep as much free memory available as possible.
If it is the drive going adding ram w/ help overall but won't help the burn failure.
Try ImgBurn to burn also - lessen the possibilities.
|
|
crazyman1
Junior Member
|
1. November 2006 @ 19:41 |
Link to this message
|
i tryed burning this movie again after i did everything we talked about and here is the new burn error log.
Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <LITE-ON DVDRW SOHW-1613S>Version: AS06 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <intelata> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
TOSHIBA DVD-ROM SD-M1212 (Target 0, F:): Autoinsert Off, DMA On, Disconnect Off, SyncDataXfer Off
LITE-ON DVDRW SOHW-1613S (Target 1, G:): Autoinsert Off, DMA On, Disconnect Off, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 56623104 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 375MB (384464kB)
Free physical memory: 63MB (65116kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.10.2006
NeroAPI
9:39:02 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
9:39:02 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
9:39:02 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
9:39:03 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
9:39:03 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1613S running
9:39:03 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:39:03 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:39:03 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:39:03 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:39:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1995903 (443:32.03, 3898MB)
9:39:03 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
9:39:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1613S, Media type: DVD-R
Disc Manufacturer: TYG01 -
Disc Application Code: 64, Disc Physical Code: 193
9:39:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:39:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1995904 (1995904) = #1995904/443:32.4
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1995904 blocks [LITE-ON DVDRW SOHW-1613S]
--------------------------------------------------------------
9:39:04 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1613S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4087611392, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1995904 | lead-out | 1 | 0x41 | 0x00
9:39:04 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
9:39:04 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
9:39:04 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
9:39:04 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
9:39:04 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:39:04 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
9:39:04 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
9:39:04 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
9:39:04 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:39:42 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
21:39:42.000 - LITE-ON DVDRW SOHW-1613S\H1 T1 : Queue again later
9:40:07 PM #26 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03310000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x00 0x00
9:40:07 PM #27 CDR -400 File Writer.cpp, Line 311
Unspecified target error
LITE-ON DVDRW SOHW-1613S\H1 T1
9:40:07 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:40:07 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:40:07 PM #30 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 2207
9:43:27 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
9:43:27 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:43:27 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2225, size=24430 bytes, created 2/2/00 5:46:04 PM
File 'IoSubsys\AFL.VXD': Ver=5.15, size=17052 bytes, created 10/31/01 9:13:54 AM
File '..\System32\Drivers\1394bus.sys': Ver=4.10.2224, size=38016 bytes, created 10/11/99 4:57:18 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=4.10.2226, size=36720 bytes, created 6/28/00 1:11:28 PM
File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2227, size=8816 bytes, created 6/28/00 1:18:44 PM
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2223, size=9849 bytes, created 10/12/99 2:56:42 PM
File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2226, size=36352 bytes, created 6/28/00 1:11:58 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2223, size=69594 bytes, created 10/12/99 3:02:40 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2223, size=18889 bytes, created 11/17/99 5:36:48 PM
Registry Keys:
|
Moderator
|
2. November 2006 @ 13:30 |
Link to this message
|
|
Damn another fail - oh well at least the pc got a cleaning and some maintenance :)
Nothing changed in the log.
I think you should try ImgBurn too - last step - then get a new burner and cable. You can take video_ts folder from Shrink and use the build mode.
Keep us posted!
|
|
crazyman1
Junior Member
|
2. November 2006 @ 16:35 |
Link to this message
|
|
GOOD NEWS
I tryed to back up another dvd and it turned out great. SO its somthing about this movie. ATLEAST its not my burner or media thats bad.
|
|
Advertisement
|
|
|
Moderator
|
2. November 2006 @ 16:53 |
Link to this message
|
|
Good deal crazyman1
Give ImgBurn a shot at burning Caillou.
|
|
