|
help with xbox
|
|
Junior Member
|
30. October 2006 @ 16:33 |
Link to this message
|
|
i was going to put flashbios 3.0.3 via http but accidently put a evox bin and then when i turned it on it turns of 3 times then flashes red and green but when i turn off chip it boots good to M$ dashboard what do i do do i have to buy a programmer ?please need help
xbox version: v1.5
dvd drive: thomson
mod-chip:xecuter 2.6 ce
|
|
Advertisement
|
 |
|
|
Senior Member
13 product reviews
|
30. October 2006 @ 20:28 |
Link to this message
|
|
You know, my Xbox is doing the same thing right now. I just opened it up one day cause a friend wanted to see if he wanted the Xecuter Chip or not, and When I put it back together, it turns on, then back off 3 or 4 times. I don't know what's going on. I hope someone can answer why this is happening. I thought it was just a wiring problem, but I'm probably wrong.
|
Junior Member
|
31. October 2006 @ 06:11 |
Link to this message
|
|
well i hope we can get someone 2 answer us
|
|
cearel
Suspended due to non-functional email address
|
31. October 2006 @ 06:47 |
Link to this message
|
|
just hit ur eject and power buttons at the same time till u get a purple light then reflash
|
Senior Member
13 product reviews
|
31. October 2006 @ 07:41 |
Link to this message
|
|
I've Tried pushing both the Power and Eject button at the same time, and I can't get to the BIOS screen to re-flash it. Do the DIP switches have to be a certain way?
|
|
cearel
Suspended due to non-functional email address
|
31. October 2006 @ 08:32 |
Link to this message
|
|
no they dont its kinda hard to get it but just keep trying u will get it
|
Senior Member
13 product reviews
|
31. October 2006 @ 08:50 |
Link to this message
|
|
Alright when I get home I'll try it out. Also the yellow wire that goes from one part of the chip to the power buttons (it is located right under the front of the HDD, and DVD Drive) one of them is pinched. Could this be an issue to it not working?
|
|
cearel
Suspended due to non-functional email address
|
31. October 2006 @ 09:07 |
Link to this message
|
|
yep it could be
|
Senior Member
13 product reviews
|
31. October 2006 @ 10:50 |
Link to this message
|
|
I just realized that one of the pins from the Solderless adapter wasn't in place. Also one end of the adapter sticks up a little, so maybe if I can make it sit snug, it may start working.
|
Junior Member
|
31. October 2006 @ 12:56 |
Link to this message
|
|
do i need a programmer to reflash ?
|
Senior Member
13 product reviews
|
31. October 2006 @ 16:23 |
Link to this message
|
|
You don't need a programmer to re-flash your Xbox. Just press both the power and eject button so that a pink/purple color turns on, on the DIP switch. That should take you to the BIOS screen, and then you can re-flash by inserting a disc, or by FTPing.
|
Junior Member
|
31. October 2006 @ 20:26 |
Link to this message
|
|
i did do the switches have to be in a certain way and does the chip have to be on or off and how many times should i press both of them?
|
Senior Member
13 product reviews
|
31. October 2006 @ 22:13 |
Link to this message
|
|
I think for the DIP switches you have to have them all off, or on, I'm not sure, but I know that they all have to be on or off. Then press the power and eject button and see if that works. The chip should be on for this to work.
|
|
cearel
Suspended due to non-functional email address
|
1. November 2006 @ 09:07 |
Link to this message
|
|
you have to have them all to the left and u just have to hit them until the led turn purple you have to press them at the same time
and yes u must have the chip on
|
Senior Member
13 product reviews
|
1. November 2006 @ 09:20 |
Link to this message
|
|
ya so I got my Xbox up and working. I tried to put the pin back in it's place, but it snapped off. So I just hot glued it back on and the xbox is working fine.
|
Junior Member
|
1. November 2006 @ 16:01 |
Link to this message
|
|
well like i said on my first post both banks are black and when i turn my chip on and turn on xbox,,,it turns on then off then does that 2 more times then it just stays on with a black screen flashing red and green on the eject button..so how do i get the flashbios screen again ?
|
|
cearel
Suspended due to non-functional email address
|
1. November 2006 @ 17:11 |
Link to this message
|
|
just hit the power eject combo
|
Junior Member
|
2. November 2006 @ 06:13 |
Link to this message
|
|
i hold both power and eject but my xbox tuns off 3 times by iself then stays put on a black screen then red and green lights flash on eject button so i only get the chance to hit both of them when the xbox stays put
|
Senior Member
13 product reviews
|
3. November 2006 @ 11:47 |
Link to this message
|
|
Bomb12guy, do you have the Xecuter 3 CE? Because what I figured out is that your chip is probably not on right, or that the pins are not all connected correctly. Make sure that all of your connections are right, and then try turning on your Xbox. I've taken apart my system 5-6 times and finally fixed the problem. It just takes some time.
|
Junior Member
|
3. November 2006 @ 14:55 |
Link to this message
|
|
yeah its put on right when i first installed my chip the flashbios screen came up but when i was flashing the chip i was supposed to put flashbios 3.0.3 bin file then i accidently put the evox bin now when i turn on my xbox with chip on it turns of 2 times then flashes red and green on the eject buttton and black screen... but the xbox boots up good to the original dashboard when chips is off so what do i do ? please need help and do i need a programmer and can someone tell me what programmers are used for ?
xbox version v1.5
dvd drive:thomson
modchip: xecuter 2.6CE
|
Senior Member
13 product reviews
|
3. November 2006 @ 16:13 |
Link to this message
|
|
I'm pretty sure that just because you installed the wrong BIOS it wouldn't be the problem. I would just make sure if you have everything installed correctly. Also there is a file or something called Slayers. I don't have a whole lot of knowledge of it, but I heard that if you get that, and install it, it will fix any problem that is wrong. But I'm not sure what it does. Check this site for something on Slayers. You will probably find something. And in my opinion, I don't think that you need a programmer to fix the problem.
|
|
cearel
Suspended due to non-functional email address
|
4. November 2006 @ 05:36 |
Link to this message
|
|
dav is wright i have the m8 bios on mine make sure ur in the bang u flashed and it should boot right up unless like he said ur chip isnt connected right
|
Junior Member
|
5. November 2006 @ 12:59 |
Link to this message
|
|
i installed it right and i accidently put a evox bin when i was supposed to put flashbios 3.0.3 and when i enable the chip it turns off 2 times and then turns on and stays put on a black screen and the eject button flashes red and green .... how do i fix it and put it back to normal?
|
Senior Member
13 product reviews
|
5. November 2006 @ 14:07 |
Link to this message
|
|
Okay, I understand that you installed the wrong BIOS. That has nothing to do with your system turning on and off. You will seriously have to open your xbox, and check all wiring. Not just for the chip, but for everything. The HDD, DVD-Rom, Power Supply, etc. There is also a switch on the chip that you can turn on so that it helps with the Flashing of your system. Turn that switch on and see what happens.
|
|
Advertisement
|
|
|
|
cearel
Suspended due to non-functional email address
|
5. November 2006 @ 15:50 |
Link to this message
|
|
yes he is exactly right m8 isnt wrong u can flash it with just about any bios but to reflash all u need to do is boot to ur back up like i said before by pressing the power/eject combo
|
