|
Wierd CDR drive problem
|
|
|
diashto
Newbie
|
29. July 2003 @ 20:31 |
Link to this message
|
|
Okay.. here's the issue..
WinXP, fully patched.
(unknown brand) 48x12x48 drive.. think maybe verbatim but unsure, becuase i got it fer $20 after rebates at office depot
Duron 900, 512mb ram, etc etc.
When i burn a CD.. if i'm burning it at any of the "MAX" speeds, the burn fails right after writing the leadin.
If i burn at, for example, 16x, the burn finishes fine, but chokes on the 'verify' portion.
If i cancel out of the verify... lo and behold.. it doesnt detect the CD in the drive... cant read it at all.
Also, if I put any burned CD in the drive, it wont read it.. retail cds are just fine though.
I've already forced it UDMA through device manager.. and now i'm stuck. :(
Device manager shows it as an ATAPI 48x24 CDRW drive if that makes any difference... also Nero only shows max speed of 40x.. which is odd, but not too much a problem i suppose.
Same problems were in Win98 when i had that loaded.. wouldnt read the CDs after burning with EZCD 5..
Anyone got any ideas?
|
|
Advertisement
|
 |
|
|
|
diashto
Newbie
|
30. July 2003 @ 05:07 |
Link to this message
|
|
slight update... did a search for D.IC because thats' what BIOS flipped it up as on bootup.. found out it's most likely a BenQ drive.. downloaded D.SC firmware.. and viola! I successfully burn at 40x! (still unable to hit 48x.. wonder why.. hmm..)
However... whne i put my freshly burned CD in the exact same drive... it's not detected... as in.. i go to my computer and it's nto listed.
I can put the CD in the other drive and it opens fine.. so that's a blessing i guess...
Any other ideas?
|
|
Praetor
Moderator
|
30. July 2003 @ 10:41 |
Link to this message
|
Quote:
still unable to hit 48x.. wonder why.. hmm
It would probably be your media being incompatible with 48x! Also, could it be ASPI?
|
|
diashto
Newbie
|
30. July 2003 @ 15:29 |
Link to this message
|
Quote:
It would probably be your media being incompatible with 48x! Also, could it be ASPI?
It might be.. but i thought Nero didnt use an aspi layer, or rather, used its own..
And i believe the media that i'm using is labelled certified 52x.. not entirely positive on that one - i would figure it wouldn't matter anyway..
Would that windows update thing that i saw a couple posts back do anything for me, or is that rolled into the service packs? If so, what's that URL again?
Anyone else got any ideas? I'm really curious to see if i can get this thing working to it's fullest capacity..
|
|
Tholak
Newbie
|
31. July 2003 @ 04:45 |
Link to this message
|
Well. I got Sony 48x media and i can't burn them at 48x cause Nero says they can only be burned at 32x.
I even tried cd speed of Nero. It goes upto 32x and goes that way.
I can burn other media like Samsung at 48x. I don't care the speed thou as long as it burns the cd right.
|
|
diashto
Newbie
|
31. July 2003 @ 05:44 |
Link to this message
|
|
doh.. media's stamped 32x not 52.. Digital Research Technology... it's still odd that it wont read the discs that *it* burns though.
Anyone got any ideas about that?
|
AfterDawn Addict
|
31. July 2003 @ 10:59 |
Link to this message
|
|
hi
it may be that your drive will be locked on burning! so even if you close program it still doesnt play! but reboot computer and i bet it will play!
Thx...
Nothing here to see, move along folks.
 |
|
diashto
Newbie
|
31. July 2003 @ 12:16 |
Link to this message
|
|
Okay... well.. how do i fix it then?
|
AfterDawn Addict
|
31. July 2003 @ 12:39 |
Link to this message
|
|
hi
well did it play?
and you cant! not that i know of?
Thx..
Nothing here to see, move along folks.
|
|
diashto
Newbie
|
13. September 2003 @ 16:46 |
Link to this message
|
|
*bumpage*
Update.. tried burning with a blank-label disc that i had laying around (i think it may have been the disc that came with the burner, in fact).. and zing-zang-zoom.. burned at 48x, no problems, closed disc, and ....
was still unable to read the disc. Although Nero came back and said the disc was successfully written this time. As someone suggested, rebooting the PC works, and the disc is able to be read in the burner drive.
|
AfterDawn Addict
|
14. September 2003 @ 02:44 |
Link to this message
|
|
Hi
It can do this sometimes as i have had it!
the software locks the drive when burning and then its finicky after burn to unlock!
thats why a reboot open the drive up to use ok and removes the software doing bad things!
Thx..
|
|
Advertisement
|
|
|
|
Praetor
Moderator
|
14. September 2003 @ 10:24 |
Link to this message
|
|
A good point indeed Rotary! :-)
Long time no see buddy!
|
