|
image file
|
|
|
raddeon
Suspended due to non-functional email address
|
1. August 2003 @ 18:03 |
Link to this message
|
|
hi i use alcohol to copy a disc as image file that all work ok but when i burn the image to disc that all seems to be completed but when i go to load disc to play game it does not work any ideas why
so image file ok
but burnt disk not ok
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
2. August 2003 @ 01:46 |
Link to this message
|
|
hi
could be either settings used to burn for the right type of protection on game disc maybe?
and you say it does not work? well what hapens? or what errors do you get?
Thx...
Nothing here to see, move along folks.
 |
|
raddeon
Suspended due to non-functional email address
|
2. August 2003 @ 04:48 |
Link to this message
|
|
hi thanks for reply
there is no message all i get is tiger wood s
encounterde a problem and will now close
that all i get
im using windows xp
there are 3 disc the other 2 work fine
the disc is 3 of 3 which is the problem
when i load the image file on virtual drive it works fine
when i insert cd in cdrom that is when i get the error
i used alcohol to copy
and disc was datasafe 2.8
it must off copy on to harddrive ok cause i can run it using image file
hope this is of help
many thanks
ive used 5 cdr so far any help would be apprecaited
|
|
Shoey
Suspended due to non-functional email address
|
2. August 2003 @ 05:51 |
Link to this message
|
Most "EA" games have Safedisc cd protection on them. If this is the latest Tiger Woods PGA Golf then it's probably Safedisc 2.8.x cd protected m8. Use ClonyXXL to scan each disc to determine which one has the cd protection ot it (mosttly the "play disc"). Use Alcohol 120% and use the Safedisc 2 datatype to rea\write. I would read at 16/20x and burn at 8x. You can use Nero to bun the non-protected discs but I encourage you to read\write slow.
Depending upon the brand name and model# of your burner will determine if you need emulation to play your backups.
Shoey :)
Shoey :)
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
 |
|
raddeon
Suspended due to non-functional email address
|
2. August 2003 @ 07:18 |
Link to this message
|
|
hi
thanks for reply
i use nec 1300a dvd r/w
i used alcohol to copy disc 1 and 2 were fine 3 is the problem
it is the latest game 2003 i used safedisc 2.8 to create image
they work fine
its when i want to play disc that the third disc wont work i copy all 3 the speed rate and safedisc 2
all 3 disc had copy protection all were 2.8 safedisc
thanks mark
This message has been edited since posting. Last time this message was edited on 2. August 2003 @ 07:20
|
|
Shoey
Suspended due to non-functional email address
|
2. August 2003 @ 07:21 |
Link to this message
|
Open Alcohol 120% and go to emulation and enable all. Minimize Alcohol 120% to system tray (startup) and insert cd 3 in your burner and try again. Hope this works...
Shoey :)
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
|
|
raddeon
Suspended due to non-functional email address
|
2. August 2003 @ 08:08 |
Link to this message
|
|
no still dont work
could this be a license problem when i explore the error from windows it says something like license digital id ?
can you tell me wat settings to use for burning that image file as i said that work fine when mount to virtual drive
i originally copy disc as per totorial on this site
there is one thing i remembered when i went to install all 3 disc .disc 1 install was ok
then it ask for disc 2 media that was fine to then when i got to disc 3 courses it stop half way and said do i want to exit setup prompt i didnt press antything
so i installed the original disc which then it carried on loading might this be the problem ?
if need be if you could give me the tutorial for safedisc 2.8 protection and i will do all again and use cdrw
many thanks
mark
|
|
Shoey
Suspended due to non-functional email address
|
2. August 2003 @ 09:42 |
Link to this message
|
Uninstall Tiger Woods then reinstall the originals with your burner .
Now open Alcohol 120% and to emulation and enable "ignore media type". Open Alcohol 120% image making wizard and choose the Safedisc 2 datatype profile and read the image(s) at 16/20x. When all finished open the image burning wizard and use the Safedisc 2 datatype profile to burn and burn at 8x (RAW DAO). When all finished insert the "play disc" (CD 3, looks like) and see if you can play the backup from your burner
Shoey :)
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
|
|
raddeon
Suspended due to non-functional email address
|
2. August 2003 @ 10:36 |
Link to this message
|
|
hi
what about the other 2 boxes launch cd and rmps do i check these as well or leave them unchecked
as disc 1 and 2 are fine cant i just copy disc 3 again then burn afterwards
mark
|
|
raddeon
Suspended due to non-functional email address
|
2. August 2003 @ 14:15 |
Link to this message
|
|
hi tried that still the same
ive got discjuggler is there a tutorial around for use with discjuggler
the one on this forum seems not to be working doesnt show up any settings
|
|
Shoey
Suspended due to non-functional email address
|
2. August 2003 @ 17:09 |
Link to this message
|
It appears cd 1 and cd 2 are fine and cd 3 is Safedisc 2.8.x cd protected. Give Blindwrite Suite 4.5.4 a try as I couldn't backup The Sims Superstar (Safedisc 2.9) with Alcohol 120%. Blindwrite did the job for my Memorex MAXX52 cdrw. Basically you read the image of cd 3 using "alternative read method" and read at 16/20x. After you've done that open the burning wizard and locate the image file and burn DAO pw at 8x. Go to general settings before you burn then enable "enhance weak sectors". Again, play the backup in your burner.
Blindwrite Suite http://www.vso-software.fr/index.htm
Shoey :)_
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
This message has been edited since posting. Last time this message was edited on 2. August 2003 @ 17:12
|
|
raddeon
Suspended due to non-functional email address
|
3. August 2003 @ 00:34 |
Link to this message
|
|
hi thanks shoey that worked fine
do i have to burn the other to disc or will they be ok
thanks again m8
much appreciated
im very happy :) :) :)
|
|
Shoey
Suspended due to non-functional email address
|
3. August 2003 @ 00:42 |
Link to this message
|
Quote:
do i have to burn the other to disc or will they be ok
Burn CD 1&2 using Blindwrite Suite but disable enhance weak sectors . Again, read at 16/20 x and bur DAO pw at 8x.
Shoey :)
|
|
Advertisement
|
|
|
|
raddeon
Suspended due to non-functional email address
|
3. August 2003 @ 13:16 |
Link to this message
|
|
thanks shoey for info ididnt have to copy disc 1 2 again i unistalled originals then reinstalled with all 3 copys and it works fine
thanks again
mark
|
