|
Download Alcoholer 4.0b and after you install open Alcoholer and run Twin Creator. For Select Supported Image choose Alcohol Image (mdf) and for Select Media Description select MDS Files. Patch the file and then open Alcohol 120% and choose SecuROM 4 *NEW datatype profile and burn the image.
4. Now it's time to patch the image files.Open Alcoholer 4.x and locate the Alcohol 120% tab folder and run TwinCreator and leave the default of 15 as it works fine for me. However, 6 and 50 are also known to work. Select the .ccd file and the .bwa file and then click start TwinCreator.Click select support image and locate the .ccd file now click select media-description and locate the bwa file and then click start. When it's finished, you'll have three new files in the same folder where you saved the original image files. Those files will be patched.ccd, patched.img and patched.sub.
5. You've patched the image files and you're now ready to burn your back-up copy. Just start alcohol?s image burning wizard and burn patched.ccd using the securom new (not securom new 4.x) datatype setting. Because this type of copy is anything but standard,, you'll probably get better results if you burn at relatively low speed (say 8x). Before burning you'll be warned that the image size doesn't match the lead-out specified in the toc and you'll be given three burning options. The first option is correct: "Keep TOC as on source cd, write until end of image file".
Hope this works, if not then try downloading another mdf or bwa file as not every mdf or bwa file will work.
Shoey :)
Asus K8N nVidia nForce3 Pro 250 GB, Athlon 64 3200+, Hitachi 80 gig SATA 150, Corsair XMS 1 gig PC4000, ATI Radeon Saphire 9600 Pro (256 DDR), Windows XP Pro (64 Bit),Lite-ON SOHD 167T,, Plextor PX-712SA,BenQ 1640.
 This message has been edited since posting. Last time this message was edited on 3. August 2003 @ 11:17
|
