|
|
|
DVD+RW Failed Data Verification, Freezes system when inserted
|
|
|
RS68
Newbie
|
6. January 2007 @ 06:02 |
Link to this message
|
I have had trouble with my IO magic DVD RW drive before but I have been able to work around the issues. I have been able to burn CDs and DVD Rs without many problems but I just started trying to burn DVD+RW disks for the first time and I am getting strange errors. I have gotten a few DVD+RWs to burn but others Fail Verification. Sometimes when I insert these disks it will freeze or slow my system until I open the drive. Others I can open, but when I open them in Nero to add new files to the DVD RW the disk appears empty.
I was reading through several posts and tried a few things. I upgraded the burner Firmware, the Nero Infotool revealed that I was missing system ASPI files. I used ForceASPI to upgrade them. I downgraded from Nvidia IDE drivers to the XP drivers because the log was showing that DMA was off. None of these solved my problems.
If there is a simple and reliable fix for this problem that would be great. Otherwise can someone recommend a drive that I can get at a local store like Walmart, Kmart, Staples, Office Max, Target.... I really would like to have a working drive today so I can stop wasting time and move on to other projects, but I don't want to buy a drive if the problem I am having will cause problems for the new drive.
Here is the latest Log from a failure:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'E:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <BTC BCE4012IM >Version: 408p - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVVN07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BTC BCE4012IM atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD800JD-55MUA1 nvata Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
BTC BCE4012IM H: CDRom0
DVDRW IDE 16X I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 247MB (253876kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2007
ISO compilation
9:29:57 AM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:29:58 AM #2 Text 0 File Reader.cpp, Line 126
Reader running
9:29:58 AM #3 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running
9:29:58 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:29:58 AM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
9:30:20 AM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 5759 ( 1:16.59, 11MB)
9:30:20 AM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
9:30:20 AM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDRW IDE 16X, Media type: DVD+RW
Disc Manufacturer ID: SONY, Media Type ID: S11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
9:30:20 AM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:30:27 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 5760 (5760) = #5760/1:16.60
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 5760 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------
9:30:27 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 11796480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
5760 | lead-out | 1 | 0x00 | 0x41
9:30:28 AM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
9:30:29 AM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
9:30:29 AM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
9:30:29 AM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2.4x (3,324 KB/s)
9:30:29 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:30:29 AM #17 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: SONY....
Media type ID: S11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 53 4F 4E 59 00 - 00 00 00 53 31 31 00 39 ...SONY....S11.9
23 00 B4 72 68 02 24 00 - AE 75 58 02 28 00 B2 73 #..rh.$..uX.(..s
62 02 24 04 12 10 E0 10 - F0 00 00 00 00 00 00 00 b.$.............
9:30:29 AM #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 5:40,380 (340380ms) -> OK
9:30:29 AM #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
9:30:36 AM #20 Text 0 File WriterStatus.cpp, Line 115
<DVDRW IDE 16X > start writing Lead-Out at LBA 5760 (1680h), lenght 0 blocks
9:30:36 AM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:30:38 AM #22 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
9:30:38 AM #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
9:30:38 AM #24 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 2.4x (3,324 KB/s)
9:30:38 AM #25 Phase 78 File dlgbrnst.cpp, Line 1855
Data verification started
9:31:11 AM #26 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 1287
Cannot mount the written CD
"DVDRW IDE 16X " (H:1, T:1)
9:31:11 AM #27 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1385
Status summary
Total files=0, identical=0, different=0, inaccessible=0, skipped=0.
9:31:11 AM #28 Phase 81 File dlgbrnst.cpp, Line 1855
Data verification failed
9:31:47 AM #29 SCSI -400 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05643000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 0x00 0x00 0x23 0x05 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3E 0x02
9:31:47 AM #30 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 2295072
9:31:54 AM #31 SCSI -400 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05653000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3E 0x02
9:31:54 AM #32 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 0
9:32:01 AM #33 SCSI -400 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05653000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3E 0x02
9:32:01 AM #34 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 0
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.50 , size=24960 bytes, created 9/7/2005 12:32:58 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 5/24/2006 5:48:03 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/18/2001 7:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
laddyboy
AfterDawn Addict
|
6. January 2007 @ 13:55 |
Link to this message
|
Hi.
Since your burner burns +R and -R media OK, it's probably just those particular RW disks that your burner doesn't like. Have you tried any other brand other than the Sony?
Have you checked for a firmware update for your burner at the IO Magic support site. Firmware updates often solve these types of problems.
http://www.iomagic.com/Firmware/FirmwareDownload.html
There is a Roxio driver (CDRAL) installed on your system. It can interfere with burning on some systems. I don't think that's the problem here. If you want to remove it, uniunstall any Roxio software you have installed and run the Roxio Zapper.
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
http://kb.roxio.com/content/kb/EE6000061
You version of Nero seems old and I notice it's Express. Do you have the full Nero suite or just Nero Lite? The best version of Nero 6 is 6.6.0.18 available here:
Package 1: http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe
Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
Be sure to run the Nero 6 Clean Tool after installing the current version and before installing a newer version.
I'd recommend the Nero 3500/3550 or the BenQ 1650/1655 if you can find them. BenQ has been bought out unfortunately. It was a good one. NEC has new models out and have changed their guts so finding the older models may not be easy. Other than those, I'd recommend the Liteon models. I recommended those brands because they were/are widely used and their is both hacked and updated firmware available.
|
|
RS68
Newbie
|
8. January 2007 @ 06:52 |
Link to this message
|
Thanks for the reply. I did the firmware update earlier and it didn't work. I didn't recall installing Roxio but I know that it comes integrated into Napster which I have. So that might explain the Roxio driver. I decided I didnt want to waste any more time on the old drive so I purchased a LiteOn model with Nero Express 7. It has worked flawlessly so far so I am very happy. Thanks for your help.
|
|
Advertisement
|
|
|
|
laddyboy
AfterDawn Addict
|
8. January 2007 @ 07:54 |
Link to this message
|
|
You're very welcome.
|
|
