|
|
|
Nero Burn Error
|
|
|
aspire180
Member
|
16. January 2007 @ 18:30 |
Link to this message
|
Not sure what is happening...DVD-Rs burn fine as do CD-Rs and CD-RWs...Even had a couple of these very same DVD-RWs burn ok initially...But, now, none of the DVD-RWs will burn...Here's a log of what happens.
Using Nero 7.5.9.0 and LiteOn 165H6S with latest firmware...Ridata 6X DVD-RW.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <LITE-ON DVDRW SHM-165H6S>Version: HS0E - HA 1 TA 1 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Memorex 52MAXX 3252AJ >Version: QWS6 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1500ADFD-00NLR1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Memorex 52MAXX 3252AJ QWS6 JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SHM-165H6SHS0E JRAID Port 4 ID 1 DMA: Off
=== CDRom-Device-Map ===
Memorex 52MAXX 3252AJ E: CDRom0
LITE-ON DVDRW SHM-165H6S F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096300kB)
Free physical memory: 1344MB (1376904kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.1.2007
ISO compilation
8:21:56 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
8:21:56 PM #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:21:56 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
8:21:56 PM #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
8:21:56 PM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2115519 (470:06.69, 4131MB)
8:21:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD DVD)
8:21:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: LITE-ON DVDRW SHM-165H6S, Media type: DVD-RW
Disc Manufacturer: RITEKW - 06
Disc Application Code: 2, Disc Physical Code: 214
8:21:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:21:57 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2115520 (2115520) = #2115520/470:6.70
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2115520 blocks [F: LITE-ON DVDRW SHM-165H6S]
--------------------------------------------------------------
8:21:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: LITE-ON DVDRW SHM-165H6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4332584960, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2115520 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2115520 | 0 | 0x00
2115520 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
8:21:57 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:21:57 PM #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
8:21:57 PM #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
8:21:57 PM #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
8:21:57 PM #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 4x (5,540 KB/s)
8:21:57 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:21:57 PM #17 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode
8:21:57 PM #18 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: Yes
8:21:57 PM #19 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 30 10 20 00 00 00 00 - 00 00 03 12 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:22:28 PM #20 Text 0 File Cdrdrv.cpp, Line 1292
20:22:28.011 - F: LITE-ON DVDRW SHM-165H6S : Queue again later
8:25:17 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x08180080: Len x10000
0x07 FF 21 D6 00 00 00 01 00 00 00 00 00 00 00 01
0x03 FF 90 EB 00 00 00 01 13 FD D4 97 00 00 00 01
0x07 FF 21 D6 00 00 00 01 00 00 00 00 00 00 00 01
8:25:17 PM #22 CDR -1135 File Writer.cpp, Line 299
Write error
F: LITE-ON DVDRW SHM-165H6S
8:25:17 PM #23 Text 0 File DVDR.cpp, Line 3434
EndDAO: Last written address was 31
8:25:29 PM #24 Phase 181 File dlgbrnst.cpp, Line 1746
Writing lead-out...
8:25:30 PM #25 Text 0 File DVDR.cpp, Line 3467
Estimated time for 30mm Borders: 3min 52sec
8:25:45 PM #26 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 4x (5,540 KB/s)
8:25:45 PM #27 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:25:47 PM #28 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
8:25:47 PM #29 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/4/2006 6:42:42 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 1:53:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Core 2 Duo E6600, 2 GB 667Mhz DDR2RAM, Asus P5B Deluxe, ATI AIW Radeon X1900 256, WD Raptor WD1500ADFD, Seagate 320 GB Barracuda 7200 16MB, Corsair HX 520W PSU, CL SoundBlaster Audigy 2, Lite On DVD-RW (2), Dell 2007WFP
|
|
Advertisement
|
|
|
|
Senior Member
|
16. January 2007 @ 19:13 |
Link to this message
|
Try:
Enable DMA mode for these devices;
CdRomPeripheral : Memorex 52MAXX 3252AJ QWS6 JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SHM-165H6SHS0E JRAID Port 4 ID 1 DMA: Off
Here's a guide/s if needed
http://www.onthegosoft.com/dma_setting_nt.htm
or
http://www.burstcopy.com/dma/xp/
This part of the log indicates that the drive is unable to correctly recognize you disks even though your firmware is up to date. All zeros, but no disk ID numbers shown.
Media Specific [16..63]:
80 30 10 20 00 00 00 00 - 00 00 03 12 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
and
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
If enabling DMA for the two devices doesn't help, I suggest you try using Verbatim disks instead.
This message has been edited since posting. Last time this message was edited on 16. January 2007 @ 19:16
|
|
aspire180
Member
|
16. January 2007 @ 21:43 |
Link to this message
|
|
Gratzie, I will try that.
Core 2 Duo E6600, 2 GB 667Mhz DDR2RAM, Asus P5B Deluxe, ATI AIW Radeon X1900 256, WD Raptor WD1500ADFD, Seagate 320 GB Barracuda 7200 16MB, Corsair HX 520W PSU, CL SoundBlaster Audigy 2, Lite On DVD-RW (2), Dell 2007WFP
|
|
JoeRyan
Senior Member
|
17. January 2007 @ 12:12 |
Link to this message
|
|
6X media are quite a bit different from 4X. Your drive is probably comfortable with 4X, but there are so few 6X versions available that the firmware settings for the 6X media do not exist in your drive. It would be better to stick with 4X.
|
|
aspire180
Member
|
17. January 2007 @ 12:25 |
Link to this message
|
|
Yeah, I thought of that and tried it at 4X but still won't get it to burn...Saying Cannot Start Disk at Once or something kinda error
Core 2 Duo E6600, 2 GB 667Mhz DDR2RAM, Asus P5B Deluxe, ATI AIW Radeon X1900 256, WD Raptor WD1500ADFD, Seagate 320 GB Barracuda 7200 16MB, Corsair HX 520W PSU, CL SoundBlaster Audigy 2, Lite On DVD-RW (2), Dell 2007WFP
|
|
aspire180
Member
|
17. January 2007 @ 17:14 |
Link to this message
|
|
Sucks...Didn't help...DMA mode was already selected for both the Primary and Secondary IDE Channels...Still no burning...Strange thing is that it did burn two of the DVD-RWs initially but now won't.
Core 2 Duo E6600, 2 GB 667Mhz DDR2RAM, Asus P5B Deluxe, ATI AIW Radeon X1900 256, WD Raptor WD1500ADFD, Seagate 320 GB Barracuda 7200 16MB, Corsair HX 520W PSU, CL SoundBlaster Audigy 2, Lite On DVD-RW (2), Dell 2007WFP
|
|
JoeRyan
Senior Member
|
19. January 2007 @ 12:03 |
Link to this message
|
Changing the recording speed of 6X DVD-RW to 4X will not make it the same as a 4X disc. Its alloy composition is very different from 4X media, and your drive cannot get the correct write strategy at any speed. Sometimes the default strategy may work, producing poor and probably unstable recordings; but usually it won't. Look for 4X or 2X DVD-RW media.
The 6X may not be able to be recorded at 1X either. This is because the speed range of phase change rewritable media is much tighter than that for dye-based, write-once media. Many people like reusing DVD-RW and DVD+RW discs for time shifting the same way they used VHS cassettes in the past. Time shifting is always at 1X; so that is why 2X and 4X DVD-RW are still around. Most 6X and all 8X are unable to be written at 1X.
|
|
Advertisement
|
|
|
|
andreas72
Newbie
|
27. January 2007 @ 15:47 |
Link to this message
|
I was getting burn errors right at the end of the burning cycle and all it was the hard drive was to fragmented or to full. Just a possiblity. I was also geting CRC errors. Those were the result of dirty/scratched DVD's or my DVD-ROM isnt as good as my DVD-RW.
|
|
