|
|
|
Burning process stops around 90%
|
|
|
glitch00
Newbie
|
29. January 2007 @ 06:22 |
Link to this message
|
Hello! I've been experiencing strange problems burning DVD's lately. Everytime I burn a DVD+R, burning goes smooth and at around 90-95%, it suddenly stops - both the DVD drive and hard disk drive stop blinking and my PC hangs, and in some occasions restart. I thought it would be Nero, but the same occurs in Roxio as well.
Around 3 out of 7 discs burned fine. But before my drive (Sony DRU-820A) has never failed on me.
I also want to point out that the problem first spawned with an "Could Not Perform End Of Disc-At-Once Error". After burning succeeding discs, it usually gets stuck at around 90-95%. What could be the cause of this? I doubt its the discs because I can burn the Imation discs on my laptop. Also I tried burning a BenQ and it stopped at around 90-95% as well. So 2 different brands of DVD+R failed. Before things used to be ok. Here's a log of the latest burn. Since my PC hanged around 90%, I had to take out the disc manually just to save the log file.
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <UC1142M IAL241P >Version: 1.0 - HA 1 TA 1 - 7.0.5.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST380817AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : UC1142M IAL241P 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-820A H: CDRom0
UC1142M IAL241P I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047792kB)
Free physical memory: 404MB (413984kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.1.2007
ISO compilation
9:11:29 PM #1 Text 0 File Isodoc.cpp, Line 6414
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:11:34 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
9:11:34 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
9:11:34 PM #4 Text 0 File Writer.cpp, Line 113
Writer H: SONY DVD RW DRU-820A running
9:11:34 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:12:04 PM #6 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
9:12:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2146911 (477:05.36, 4193MB)
9:12:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
9:12:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: SONY DVD RW DRU-820A, Media type: DVD+R
Disc Manufacturer ID: DAXON, Media Type ID: AZ3, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
9:12:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:12:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2146912 (2146912) = #2146912/477:5.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2146912 blocks [H: SONY DVD RW DRU-820A]
--------------------------------------------------------------
9:12:07 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: SONY DVD RW DRU-820A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4396875776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2146912 | lead-out | 1 | 0x41 | 0x00
9:12:07 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:12:07 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:12:07 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
9:12:07 PM #16 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
9:12:07 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
9:12:07 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 16x (22,160 KB/s)
9:12:07 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:12:07 PM #20 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: DAXON...
Media type ID: AZ3
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 44 41 58 4F 4E - 00 00 00 41 5A 33 00 38 ...DAXON...AZ3.8
23 54 37 14 00 23 6F 00 - 7D 6A 17 19 0C 0C 0A 0B #T7..#o.}j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
9:12:07 PM #21 Text 0 File DVDR.cpp, Line 6362
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
9:12:07 PM #22 CDR -1207 File DVDR.cpp, Line 5500
Book Type automatically set to: DVD-ROM
9:12:07 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
9:32:16 PM #24 SPTI -1114 File SCSIPassThrough.cpp, Line 290
H: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1C 72 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x05a20000: Len x10000
0xA7 CF 21 0E A3 47 FF 59 72 16 32 68 02 50 11 A5
0x12 18 68 72 C6 2E 38 A7 A1 A9 BA A5 F8 B2 13 41
0x91 58 6F 08 4A 1C DA 2D 7A CA 79 41 E9 BB 4F FF
9:32:16 PM #25 CDR -1114 File Writer.cpp, Line 302
Reset occurred
H: SONY DVD RW DRU-820A
9:32:16 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:32:17 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:32:17 PM #28 SPTI -1080 File SCSIPassThrough.cpp, Line 290
H: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
9:32:17 PM #29 SPTI -1080 File SCSIPassThrough.cpp, Line 290
H: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
9:32:17 PM #30 CDR -1080 File WriterStatus.cpp, Line 167
Disc not present
H: SONY DVD RW DRU-820A
9:32:17 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
9:32:17 PM #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 1/7/2006 12:52:44 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 1:07:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
On a side note, before when I used to burn DVD's - PowerBurn activates. Now I don't see it.
Hope someone can help me out. Thanks!
|
Senior Member
|
29. January 2007 @ 06:38 |
Link to this message
|
Quote:
Disc Manufacturer ID: DAXON, Media Type ID: AZ3
Not very good disks at all, although it looks like ur burner read them, but the media could be the problem.
Quote:
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b
Here is a firmware update for ur burner that might help with the disks u r using and burning a such a high speed.
http://forum.rpc1.org/dl_firmware.php?download_id=2237
Quote:
Burn process failed at 16x
WAY too fast for those type of blank media, better to burn at half of the top rated speed
this is what i would do to see whats the problem.
1. try burning at a lower speed, 4x,6x,8x i wouldn't go higher than this.
2. Try updating ur firmware.
3. if all that fails, then its the blank media,
best media u can use is Verbatims, or Taiyo Yudens.
4. also i saw u burning an ISO file with Nero, IMO, ImgBurn is way better at burning ISO's than Nero, i only would burn Video_ts folders with Nero.
http://www.imgburn.com/index.php?act=download
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson This message has been edited since posting. Last time this message was edited on 29. January 2007 @ 06:40
|
|
glitch00
Newbie
|
29. January 2007 @ 08:15 |
Link to this message
|
Quote:
Here is a firmware update for ur burner that might help with the disks u r using and burning a such a high speed.
http://forum.rpc1.org/dl_firmware.php?download_id=2237[/quote]
Thats very scary. I'll do that as a last resort. :)
Quote:
WAY too fast for those type of blank media, better to burn at half of the top rated speed
Thanks! I'll definately try that. Thank you so much!
I'll also try that ImgBurn if I have trouble. Your post was very very informative. Thank you so much again! :)
|
|
