|
I'm using Win XP and Nero 5.5 to burn CDRs and CDRWs, everything was working fine but recently bought some new faster CDRWs (x10 speed).
My CD burner is a TEAC CD-W512EB
When trying to burn to the CDRWs using Nero, initially the error was :-
21:01:25 #16 mmc -1106 File Writer.cpp, Line 308
Power calibration error
21:01:25 #19 mmc -1046 File WriterStatus.cpp, Line 180
This is not a CD-Recordable
I can post full log if necessary, ASPI layer at that point was Ver=4.01 (984).
My attempts to fix were as follows :-
- Tried another blank CDRW (same make etc) TDK CD-RW700 high speed.
- I upgraded Nero from 5.5.5 to latest 5.5.9 ? - then got a slightly different error :-
11:37:52 #19 MMC -1106 File Writer.cpp, Line 330
Power calibration error
11:37:52 #22 MMC -1046 File WriterStatus.cpp, Line 184
Illegal medium
11:37:52 #23 TRANSFER -18 File WriterStatus.cpp, Line 184
Could not perform EndTrack
11:37:52 #24 CDR -201 File WriterStatus.cpp, Line 187
Invalid writestate
again see end for full log of 2nd error.
- Having read read the FAQ etc, I decided to check my ASPI files, the recommended checking software said they were out of date, so I downloaded Aspi 4.71 from Adaptec and ran the KILLASPI.BAT first, then the install.bat XP32.
Bit I'm still getting the same problem burning CDRWs using Nero.
I've also checked the DMA settings for Primary or Secondary Contoller Properties > Advanced Settings
and is "DMA if available" .
Any ideas would be much apprieciated.
Also tried InCD which has worked before for slower CDRWs but now gives InCD Error Code of [0051-0003-0073-0003] Disc Error Occured. Whatever this means. Also upgraded InCD to latest version.
Pete
--------
2nd Log
Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06/05/2002 11:01:22
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 11/07/2002 22:03:00
Nero Version: 5.5.9.0
Recorder: <TEAC CD-W512EB> Version: 2.0A - HA 1 TA 0 - 5.5.9.0
Adapter driver: <atapi> HA 1
Drive buffer : 2976kB
Bus Type : default (0) -> ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-116>Version: 1.07 - HA 1 TA 1 - 5.5.9.0
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 5T060H6 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W512EB atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 1 DMA: On
DiskPeripheral : TOSHIBA MK6412MAT QUARTANT Port 2 ID 0 DMA: ?
=======================
AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261600kB)
Free physical memory: 124MB (127260kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
CD-ROM (ISO)
12.7.2002
11:37:38 #1 Text 0 File Isodoc.cpp, Line 6002
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:37:38 #2 Phase 72 File dlgbrnst.cpp, Line 1560
BURN-Proof activated
11:37:38 #3 Text 0 File Reader.cpp, Line 118
Reader running
11:37:38 #4 Text 0 File Writer.cpp, Line 129
Writer TEAC CD-W512EB running
11:37:38 #5 Text 0 File Burncd.cpp, Line 3474
Turn on Track-At-Once, using CD-R/RW media
11:37:38 #6 ISO9660GEN -11 File geniso.cpp, Line 4427
First writeable address = 0 (0x00000000)
11:37:38 #7 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
11:37:39 #8 Text 0 File DlgWaitCD.cpp, Line 198
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 599 ( 0:09.74)
11:37:40 #9 Text 0 File DlgWaitCD.cpp, Line 1393
Recorder: TEAC CD-W512EB;
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: A3 00 CE, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 48, 3: 00 00 00 (invalid)
11:37:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 835
Prepare recorder TEAC CD-W512EB for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 1536000
11:37:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Removed 2 run-out blocks from end of track 1.
11:37:44 #12 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [TEAC CD-W512EB ]
--------------------------------------------------------------
11:37:44 #13 Phase 24 File dlgbrnst.cpp, Line 1560
Caching of files started
11:37:44 #14 Phase 25 File dlgbrnst.cpp, Line 1560
Caching of files completed
11:37:44 #15 Phase 36 File dlgbrnst.cpp, Line 1560
Burn process started at 10x (1,500 KB/s)
11:37:44 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1967
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
11:37:44 #17 Text 0 File Mmc.cpp, Line 16205
Set BUFE: BURN-Proof -> ON
11:37:52 #18 SCSI -1106 File Cdrdrv.cpp, Line 1406
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x024A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
11:37:52 #19 MMC -1106 File Writer.cpp, Line 330
Power calibration error
11:37:52 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
11:37:52 #21 SCSI -1046 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
11:37:52 #22 MMC -1046 File WriterStatus.cpp, Line 184
Illegal medium
11:37:52 #23 TRANSFER -18 File WriterStatus.cpp, Line 184
Could not perform EndTrack
11:37:52 #24 CDR -201 File WriterStatus.cpp, Line 187
Invalid writestate
11:37:52 #25 TRANSFER -18 File WriterStatus.cpp, Line 187
Could not perform EndTrack
11:37:52 #26 SCSI -1046 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
11:37:52 #27 MMC -1046 File WriterStatus.cpp, Line 226
Illegal medium
11:37:52 #28 TRANSFER -19 File WriterStatus.cpp, Line 226
Could not perform Fixation
11:37:52 #29 Text 0 File WriterStatus.cpp, Line 235
falling back to disc fixation
11:37:52 #30 SCSI -1046 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
11:37:52 #31 MMC -1046 File WriterStatus.cpp, Line 226
Illegal medium
11:37:52 #32 TRANSFER -19 File WriterStatus.cpp, Line 226
Could not perform Fixation
11:37:52 #33 Phase 38 File dlgbrnst.cpp, Line 1560
Burn process failed at 10x (1,500 KB/s)
11:37:52 #34 Text 0 File Scsicmd.cpp, Line 383
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001) built by: WinDDK, size=16512 bytes, created 06/05/2002 11:01:14
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
