|
|
|
Nero burn keeps failing
|
|
|
darcangel
Newbie
|
3. March 2007 @ 15:35 |
Link to this message
|
here is the log. any help?
1a2001000003218806599620
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 6:03:20 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU53 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CDRW/DVD TSL462C>Version: DE01 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HTS541060G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDRW/DVD TSL462C atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CDRW/DVD TSL462 E: CDRom0
TOSHIBA CD/DVDW SD-R5372 K: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1271MB (1301884kB)
Free physical memory: 666MB (682568kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.3.2007
===== Disc-Copy over image - 1st step : Copy to image ...
5:19:45 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
5:19:45 PM #2 Phase 48 File dlgbrnst.cpp, Line 1832
Analyzing disc
5:19:45 PM #3 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
5:19:45 PM #4 CDCOPY -1 File CDCopy.cpp, Line 1907
The CD is copyrighted
5:19:46 PM #5 Text 0 File CDCopy.cpp, Line 2123
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 253956 253955 ( 56:28.05)
5:19:46 PM #6 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 253956 = 253956, data (TRM_DATA_MODE1, block size 2048)
5:19:47 PM #7 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
5:19:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 253955 ( 56:28.05)
5:19:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
5:19:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
5:19:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:19:47 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 253956 (253956) = #253956/56:26.6
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 253956 blocks [Image Recorder]
--------------------------------------------------------------
5:19:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 520409088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
253956 | lead-out | 1 | 0x41 | 0x00
5:19:47 PM #14 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
5:19:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
5:25:21 PM #16 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 253956 (3E004h), lenght 0 blocks
5:25:21 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:25:21 PM #18 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
5:25:25 PM #1 Text 0 File Burncd.cpp, Line 2868
TOSHIBA CD/DVDW SD-R5372
Buffer underrun protection activated
5:25:25 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
5:25:25 PM #3 Text 0 File Writer.cpp, Line 122
Writer TOSHIBA CD/DVDW SD-R5372 running
5:25:25 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 520409088
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=56:26.06 ( 253956) RecDep=0x00
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\Anthony1\My Documents\TempImage.nrg>
5:25:25 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
5:25:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 253955 ( 56:28.05)
5:25:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
5:25:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: TOSHIBA CD/DVDW SD-R5372;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
5:25:55 PM #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.)
5:25:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) provided
original disc pos #0 + 253956 (253956) = #253956/56:26.6
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 253956 blocks [TOSHIBA CD/DVDW SD-R5372]
--------------------------------------------------------------
5:25:55 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 520409088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
253956 | lead-out | 1 | 0x41 | 0x00
5:25:55 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)
5:25:55 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
5:25:55 PM #14 Text 0 File Mmc.cpp, Line 16452
StartDAO : CD-Text - Off
5:25:55 PM #15 Text 0 File Mmc.cpp, Line 21206
Set BUFE: Buffer underrun protection -> ON
5:25:55 PM #16 Text 0 File Mmc.cpp, Line 16739
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 38 1c 06
5:28:06 PM #17 Text 0 File WriterStatus.cpp, Line 116
<TOSHIBA CD/DVDW SD-R5372> start writing Lead-Out at LBA 253956 (3E004h), lenght 0 blocks
5:28:06 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:28:35 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
5:28:35 PM #20 CDR -1135 File ThreadedTransferInterface.cpp, Line 1867
Write error
5:28:35 PM #21 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867
Could not perform end of Disc-at-once
5:28:35 PM #22 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
TOSHIBA CD/DVDW SD-R5372\H1 T1
5:28:35 PM #23 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
5:28:35 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 48x (7,200 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 1:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 5:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 12:23:54 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
onya
Suspended permanently
|
4. March 2007 @ 04:16 |
Link to this message
|
|
Lower the burn speed, if this does not fix the problem, still use a low burn speed but also turn off "on the fly" (disc at once)
Have you had good results before?
What media have you been using?
Cheers.
|
|
darcangel
Newbie
|
4. March 2007 @ 20:07 |
Link to this message
|
Originally posted by onya:
Lower the burn speed, if this does not fix the problem, still use a low burn speed but also turn off "on the fly" (disc at once)
Have you had good results before?
What media have you been using?
Cheers.
thanks worked like a charm.
i never used these CD-Rs be4 usually i can burn full speed all the time but these discs must suck. won't buy them again
|
Newbie
|
19. March 2007 @ 18:05 |
Link to this message
|
|
if what the other guy siad didnt work try burning it at 1x
|
|
Advertisement
|
|
|
|
onya
Suspended permanently
|
20. March 2007 @ 04:13 |
Link to this message
|
Originally posted by runeman17:
if what the other guy siad didnt work try burning it at 1x
I've read several instances that burning at this speed, can cause it's own set of probs. Have you had success at this speed?
|
|
