|
|
|
Nero Burning Problem!!! Please Help!!!!
|
|
|
JReuter10
Newbie
|
18. March 2007 @ 09:52 |
Link to this message
|
Hi, I have been through the forum before and seen that some people have had similar problems and I have waited to post my own until I was sure there was nothing else I could do. I have updated the firmware through a link found on this site (thanks for that by the way)and made sure that I am in DMA mode. However, the same error log still appears. Any help would be much appreciated!
2:23:09 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682027008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286146 | lead-out | 1 | 0x00 | 0x41
2:23:09 PM #14 Phase 24 File APIProgress.cpp, Line 253
Caching of files started
2:23:09 PM #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
2:23:09 PM #16 Phase 25 File APIProgress.cpp, Line 253
Caching of files completed
2:23:09 PM #17 Phase 36 File APIProgress.cpp, Line 253
Burn process started at 2.4x (3,324 KB/s)
2:23:09 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:23:09 PM #19 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode
2:23:09 PM #20 Text 0 File Mmc.cpp, Line 19487
Set BUFE: JustLink -> ON
2:23:09 PM #21 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: No
2:23:09 PM #22 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
60 00 10 20 30 40 50 00 - 00 00 21 00 00 00 00 00 `...0@P...!.....
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:23:09 PM #23 SCSI -1046 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x50 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
2:23:09 PM #24 CDR -1046 File ThreadedTransferInterface.cpp, Line 1573
Illegal disc
2:23:09 PM #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1573
Could not perform start of Disc-at-once
2:23:09 PM #26 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
|
Bigfatboy
Member
|
18. March 2007 @ 09:58 |
Link to this message
|
|
your log is incomplete, please post the whole log
peace
|
|
PacMan777
AfterDawn Addict
|
18. March 2007 @ 10:13 |
Link to this message
|
You need to get a mod to move this to the Nero forum. You'll get more Nero fan's reading it that way. Plus as mentioned, include the entire log.
|
|
JReuter10
Newbie
|
18. March 2007 @ 10:18 |
Link to this message
|
Apologies, entire log included:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero API version: 6.3.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD+-RW ND-6500A> Version: 203E - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 494MB (506288kB)
Free physical memory: 141MB (144952kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.3.2007
NeroAPI
3:16:30 PM #1 Phase 112 File APIProgress.cpp, Line 253
DVD-Video files reallocation started
3:16:30 PM #2 Phase 114 File APIProgress.cpp, Line 253
DVD-Video files reallocation completed (no file modified)
3:16:30 PM #3 Phase 111 File APIProgress.cpp, Line 253
DVD-Video files sorted
3:16:30 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
3:16:30 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
3:16:31 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
3:16:31 PM #7 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-At-Once, using DVD media
3:17:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286145 (508:01.70, 4465MB)
3:17:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
3:17:13 PM #10 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: DAXON0 - 16S
Disc Application Code: 64, Disc Physical Code: 193
3:17:13 PM #11 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Dual Layer.)
3:17:13 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286146 (2286146) = #2286146/508:1.71
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286146 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
3:17:13 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682027008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286146 | lead-out | 1 | 0x00 | 0x41
3:17:13 PM #14 Phase 24 File APIProgress.cpp, Line 253
Caching of files started
3:17:13 PM #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
3:17:13 PM #16 Phase 25 File APIProgress.cpp, Line 253
Caching of files completed
3:17:13 PM #17 Phase 36 File APIProgress.cpp, Line 253
Burn process started at 2.4x (3,324 KB/s)
3:17:13 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:17:13 PM #19 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode
3:17:13 PM #20 Text 0 File Mmc.cpp, Line 19487
Set BUFE: JustLink -> ON
3:17:13 PM #21 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: No
3:17:13 PM #22 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
60 00 10 20 30 40 50 00 - 00 00 21 00 00 00 00 00 `...0@P...!.....
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:17:13 PM #23 SCSI -1046 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x50 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
3:17:13 PM #24 CDR -1046 File ThreadedTransferInterface.cpp, Line 1573
Illegal disc
3:17:13 PM #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1573
Could not perform start of Disc-at-once
3:17:13 PM #26 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
PacMan777
AfterDawn Addict
|
18. March 2007 @ 10:40 |
Link to this message
|
I'd suspect the problem may be the media. Manufacturer: DAXON0 - 16S I've never heard of the manufacturer before. Try a known good brand such as Verbatim, Taiyo Yuden, or the Sony +R. It wouldn't be a bad idea to upgrade the software. You can check with Gwen or one of the others in the Nero section for a later stable version and links for a download. I know they exist, just haven't kept track of them. I used to use Nero 6 but went with Nero 7 when it became available.
|
|
JReuter10
Newbie
|
18. March 2007 @ 12:37 |
Link to this message
|
Updated Nero, New Error:
1C82-0000-19E5-MAAX-4007-9944-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.7.5.1
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 7, 5, 1
Recorder: <_NEC DVD+-RW ND-6500A> Version: 203E - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
BUFE : 0
Physical memory : 494MB (506288kB)
Free physical memory: 261MB (267912kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.3.2007
NeroAPI
5:28:09 PM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
5:28:09 PM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)
5:28:09 PM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
5:28:10 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:28:10 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:28:10 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
5:28:10 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
5:28:10 PM #8 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media
5:28:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286159 (508:02.09, 4465MB)
5:28:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
5:28:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: DAXON0 - 16S
Disc Application Code: 64, Disc Physical Code: 193
5:28:11 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:28:11 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [D: _NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
5:28:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2286160 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286160 | 0 | 0x00
2286160 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:28:11 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:28:11 PM #16 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
5:28:11 PM #17 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.
5:28:11 PM #18 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
5:28:11 PM #19 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 2.4x (3,324 KB/s)
5:28:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:28:11 PM #21 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode for Multisession
5:28:12 PM #22 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: No
5:28:12 PM #23 Text 0 File Cdrdrv.cpp, Line 9285
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:28:12 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 22 E2 50 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
5:28:12 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1785
Illegal disc
D: _NEC DVD+-RW ND-6500A
5:28:12 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1785
Could not perform start of Disc-at-once
5:28:12 PM #27 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 2.4x (3,324 KB/s)
5:28:12 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
5:28:12 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
5:28:12 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:28:13 PM #31 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed
5:28:13 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
JReuter10
Newbie
|
18. March 2007 @ 12:41 |
Link to this message
|
|
The Disc Brand is Memorex by the way...
|
|
PacMan777
AfterDawn Addict
|
18. March 2007 @ 12:53 |
Link to this message
|
Memorex is just a brand name. The manufacturer, DAXON0, is an unknown as far as I can tell. I noticed you didn't try changing media. I also noticed you may not have used the Nero Cleaner tool when you deleted Nero 6 to install 7. Try a media change first to see what happens. DAXON0 as I mentioned is relatively unknown and Memorex has developed a bad rep for using unknown manufacturers of poor quality media. It may not be the problem, but it would be the first I'd eliminate and it's probably the easiest. You'll be able to use the good media anyway, it adds to your stock. So, it's not a waste.
5:28:12 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1785
Illegal disc
The error you have can be caused by poor quality media.
I forgot, updating your drive's firmware may help.
http://support.necam.com/Optical/downloads/FlashFirmware/
This message has been edited since posting. Last time this message was edited on 18. March 2007 @ 13:07
|
|
JReuter10
Newbie
|
18. March 2007 @ 14:15 |
Link to this message
|
|
Switched to the Sony +R, problem solved. Thanks for the help, I'm surprised the disc was the case, Imation and Memorex (the two that did not work) have worked before in the past. Anyway, thank you much for the help!!!!!!!
|
|
PacMan777
AfterDawn Addict
|
18. March 2007 @ 14:29 |
Link to this message
|
You're welcome. Memorex and Imation aren't always manufactured by the same manufacturer. You have to read the ID to be sure what you are using. I've seen this happen many times, so may have been more familiar with what was going on. Some name brands use some poor manufacuturers at times. Imation is another. Software like Nero will often ID the manufacturer. DVD Identifier is a simple tool that only IDs the media manufacturer. You can get the download for it with a google.
I'm curious, run DVD Identifier and tell us who made your Imation, if you don't mind. No need to go through a Nero log. I suspect it may be CMC. It's an idea to check your media for manufacturer when you buy it. If you're familiar with some brands, you can just about tell what you're getting by looking at the labels. The Sony +R I suggested is made by Taiyo Yuden if made in Japan and Sony if made in Taiwan. I've had excellent success with both and don't mind recommending them. Taiyo Yuden is a top manufacturer for different brands and also sells under their own name. I've heard some bad reports on Sony -R, so that's why I was specific about +R. Besides +R can booktype to DVD ROM for better compatibility and -R can't.
This message has been edited since posting. Last time this message was edited on 18. March 2007 @ 14:33
|
|
JReuter10
Newbie
|
19. March 2007 @ 07:29 |
Link to this message
|
|
Your suspicions are correct. CMC Magnetics Corp is the manufacturer.
|
Senior Member
|
19. March 2007 @ 07:39 |
Link to this message
|
|
Thats a suprise, CMC disks not working. LMAO ;)
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
|
Advertisement
|
|
|
|
PacMan777
AfterDawn Addict
|
19. March 2007 @ 16:31 |
Link to this message
|
Originally posted by JReuter10:
Your suspicions are correct. CMC Magnetics Corp is the manufacturer.
That's why I stopped using Imation. For a long time they were using Ricohjpn as their +R offering. Ricoh manufacture(d) media for Verbatim and other top brands. They used to be one of my favorites until they started getting harder to find. Imation put CMC in the mix just after Memorex started having so much trouble with them. I still don't understand how CMC survives with so many complaints. If I owned a brand, I'd be reluctant to put it on a CMC disc.
|
|
